dispatch_source_create(3) Library Functions Manual dispatch_source_create(3)

dispatch_source_createdispatch event sources

#include <dispatch/dispatch.h>

dispatch_source_t
dispatch_source_create(dispatch_source_type_t type, uintptr_t handle, unsigned long mask, dispatch_queue_t queue);

void
dispatch_source_set_event_handler(dispatch_source_t source, void (^block)(void));

void
dispatch_source_set_event_handler_f(dispatch_source_t source, void (*function)(void *));

void
dispatch_source_set_registration_handler(dispatch_source_t source, void (^block)(void));

void
dispatch_source_set_registration_handler_f(dispatch_source_t source, void (*function)(void *));

void
dispatch_source_set_cancel_handler(dispatch_source_t source, void (^block)(void));

void
dispatch_source_set_cancel_handler_f(dispatch_source_t source, void (*function)(void *));

void
dispatch_source_cancel(dispatch_source_t source);

long
dispatch_source_testcancel(dispatch_source_t source);

uintptr_t
dispatch_source_get_handle(dispatch_source_t source);

unsigned long
dispatch_source_get_mask(dispatch_source_t source);

unsigned long
dispatch_source_get_data(dispatch_source_t source);

void
dispatch_source_merge_data(dispatch_source_t source, unsigned long data);

void
dispatch_source_set_timer(dispatch_source_t source, dispatch_time_t start, uint64_t interval, uint64_t leeway);

Dispatch event sources may be used to monitor a variety of system objects and events including file descriptors, mach ports, processes, virtual filesystem nodes, signal delivery and timers.

When a state change occurs, the dispatch source will submit its event handler block to its target queue.

The () function creates a new dispatch source object that may be retained and released with calls to () and () respectively. The queue parameter specifies the target queue of the new source object, it will be retained by the source object. Pass the DISPATCH_TARGET_QUEUE_DEFAULT constant to use the default target queue (the default priority global concurrent queue).

Newly created sources are created in a suspended state. After the source has been configured by setting an event handler, cancellation handler, registration handler, context, etc., the source must be activated by a call to () before any events will be delivered.

Dispatch sources may be one of the following types:

  • DISPATCH_SOURCE_TYPE_DATA_ADD
  • DISPATCH_SOURCE_TYPE_DATA_OR
  • DISPATCH_SOURCE_TYPE_DATA_REPLACE
  • DISPATCH_SOURCE_TYPE_MACH_SEND
  • DISPATCH_SOURCE_TYPE_MACH_RECV
  • DISPATCH_SOURCE_TYPE_MEMORYPRESSURE
  • DISPATCH_SOURCE_TYPE_PROC
  • DISPATCH_SOURCE_TYPE_READ
  • DISPATCH_SOURCE_TYPE_SIGNAL
  • DISPATCH_SOURCE_TYPE_TIMER
  • DISPATCH_SOURCE_TYPE_VNODE
  • DISPATCH_SOURCE_TYPE_WRITE

The handle and mask arguments to () and the return values of the dispatch_source_get_handle(), dispatch_source_get_mask(), and dispatch_source_get_data() functions should be interpreted according to the type of the dispatch source.

The () function returns the underlying handle to the dispatch source (i.e. file descriptor, mach port, process identifer, etc.). The result of this function may be cast directly to the underlying type.

The () function returns the set of flags that were specified at source creation time via the mask argument.

The () function returns the currently pending data for the dispatch source. This function should only be called from within the source's event handler. The result of calling this function from any other context is undefined.

The () function is intended for use with the DISPATCH_SOURCE_TYPE_DATA_ADD, DISPATCH_SOURCE_TYPE_DATA_OR and DISPATCH_SOURCE_TYPE_DATA_REPLACE source types. The result of using this function with any other source type is undefined. Data merging is performed according to the source type:

• DISPATCH_SOURCE_TYPE_DATA_ADD
data is atomically added to the source's data
• DISPATCH_SOURCE_TYPE_DATA_OR
data is atomically bitwise ORed into the source's data
• DISPATCH_SOURCE_TYPE_DATA_REPLACE
data atomically replaces the source's data.

If the source data value resulting from the merge operation is 0, the source handler will not be invoked. This can happen if:

  • the atomic addition wraps for sources of type DISPATCH_SOURCE_TYPE_DATA_ADD,
  • 0 is merged for sources of type DISPATCH_SOURCE_TYPE_DATA_REPLACE.

In order to receive events from the dispatch source, an event handler should be specified via (). The event handler block is submitted to the source's target queue when the state of the underlying system handle changes, or when an event occurs. If a source is resumed with no event handler block set, events will be quietly ignored. If the event handler block is changed while the source is suspended, or from a block running on a serial queue that is the source's target queue, then the next event handler invocation will use the new block.

Dispatch sources may be suspended or resumed independently of their target queues using () and dispatch_resume() on the dispatch source directly. The data describing events which occur while a source is suspended are coalesced and delivered once the source is resumed.

The handler block need not be reentrant safe, as it is not resubmitted to the target queue until any prior invocation for that dispatch source has completed. When the handler is set, the dispatch source will perform a () on the handler block.

To unset the event handler, call () and pass NULL as function. This unsets the event handler regardless of whether the handler was a function pointer or a block. Registration and cancellation handlers (see below) may be unset in the same way, but as noted below, a cancellation handler may be required.

When dispatch_resume() is called on a suspended or newly created source, there may be a brief delay before the source is ready to receive events from the underlying system handle. During this delay, the event handler will not be invoked, and events will be missed.

Once the dispatch source is registered with the underlying system and is ready to process all events its optional registration handler will be submitted to its target queue. This registration handler may be specified via ().

The event handler will not be called until the registration handler finishes. If the source is canceled (see below) before it is registered, its registration handler will not be called.

The () function asynchronously cancels the dispatch source, preventing any further invocation of its event handler block. Cancellation does not interrupt a currently executing handler block (non-preemptive). If a source is canceled before the first time it is resumed, its event handler will never be called. (In this case, note that the source must be resumed before it can be released.)

The () function may be used to determine whether the specified source has been canceled. A non-zero value will be returned if the source is canceled.

When a dispatch source is canceled its optional cancellation handler will be submitted to its target queue. The cancellation handler may be specified via (). This cancellation handler is invoked only once, and only as a direct consequence of calling dispatch_source_cancel().

a cancellation handler is required for file descriptor and mach port based sources in order to safely close the descriptor or destroy the port. Closing the descriptor or port before the cancellation handler has run may result in a race condition: if a new descriptor is allocated with the same value as the recently closed descriptor while the source's event handler is still running, the event handler may read/write data to the wrong descriptor.

The following section contains a summary of supported dispatch event types and the interpretation of their parameters and returned data.

DISPATCH_SOURCE_TYPE_DATA_ADD, DISPATCH_SOURCE_TYPE_DATA_OR, DISPATCH_SOURCE_TYPE_DATA_REPLACE

Sources of this type allow applications to manually trigger the source's event handler via a call to (). The data will be merged with the source's pending data via an atomic add or atomic bitwise OR, or direct replacement (based on the source's type), and the event handler block will be submitted to the source's target queue. The data is application defined. These sources have no handle or mask and zero should be used.

DISPATCH_SOURCE_TYPE_MACH_SEND

Sources of this type monitor a mach port with a send right for state changes. The handle is the mach port (mach_port_t) to monitor and the mask may be:

• DISPATCH_MACH_SEND_DEAD
The port's corresponding receive right has been destroyed

The data returned by () is a bitmask that indicates which of the events in the mask were observed. Note that because this source type will request notifications on the provided port, it should not be mixed with the use of () on the same port.

DISPATCH_SOURCE_TYPE_MACH_RECV

Sources of this type monitor a mach port with a receive right for state changes. The handle is the mach port (mach_port_t) to monitor and the mask is unused and should be zero. The event handler block will be submitted to the target queue when a message on the mach port is waiting to be received.

DISPATCH_SOURCE_TYPE_MEMORYPRESSURE

Sources of this type monitor the system memory pressure condition for state changes. The handle is unused and should be zero. The mask may be one or more of the following:

• DISPATCH_MEMORYPRESSURE_NORMAL
The system memory pressure condition has returned to normal.
• DISPATCH_MEMORYPRESSURE_WARN
The system memory pressure condition has changed to warning.
• DISPATCH_MEMORYPRESSURE_CRITICAL
The system memory pressure condition has changed to critical.

The data returned by () indicates which of the events in the mask were observed.

Elevated memory pressure is a system-wide condition that applications registered for this source should react to by changing their future memory use behavior, e.g. by reducing cache sizes of newly initiated operations until memory pressure returns back to normal.

However, applications should traverse and discard existing caches for past operations when the system memory pressure enters an elevated state, as that is likely to trigger VM operations that will further aggravate system memory pressure.

DISPATCH_SOURCE_TYPE_PROC

Sources of this type monitor processes for state changes. The handle is the process identifier (pid_t) of the process to monitor and the mask may be one or more of the following:

• DISPATCH_PROC_EXIT
The process has exited and is available to wait(2).
• DISPATCH_PROC_FORK
The process has created one or more child processes.
• DISPATCH_PROC_EXEC
The process has become another executable image via a call to execve(2) or posix_spawn(2).
• DISPATCH_PROC_SIGNAL
A signal was delivered to the process.

The data returned by () is a bitmask that indicates which of the events in the mask were observed.

DISPATCH_SOURCE_TYPE_READ

Sources of this type monitor file descriptors for pending data. The handle is the file descriptor (int) to monitor and the mask is unused and should be zero.

The data returned by () is an estimated number of bytes available to be read from the descriptor. This estimate should be treated as a suggested read buffer size. There are no guarantees that a complete read of this size will be performed.

Users of this source type are strongly encouraged to perform non-blocking I/O and handle any truncated reads or error conditions that may occur. See fcntl(2) for additional information about setting the O_NONBLOCK flag on a file descriptor.

DISPATCH_SOURCE_TYPE_SIGNAL

Sources of this type monitor signals delivered to the current process. The handle is the signal number to monitor (int) and the mask is unused and should be zero.

The data returned by () is the number of signals received since the last invocation of the event handler block.

Unlike signal handlers specified via (), the execution of the event handler block does not interrupt the current thread of execution; therefore the handler block is not limited to the use of signal safe interfaces defined in sigaction(2). Furthermore, multiple observers of a given signal are supported; thus allowing applications and libraries to cooperate safely. However, a dispatch source install a signal handler or otherwise alter the behavior of signal delivery. Therefore, applications must ignore or at least catch any signal that terminates a process by default. For example, near the top of ():

signal(SIGTERM, SIG_IGN);

DISPATCH_SOURCE_TYPE_TIMER

Sources of this type periodically submit the event handler block to the target queue. The handle argument is unused and should be zero.

The data returned by () is the number of times the timer has fired since the last invocation of the event handler block.

The timer parameters are configured with the () function. Once this function returns, any pending source data accumulated for the previous timer parameters has been cleared; the next fire of the timer will occur at start, and every interval nanoseconds thereafter until the timer source is canceled.

Any fire of the timer may be delayed by the system in order to improve power consumption and system performance. The upper limit to the allowable delay may be configured with the leeway argument, the lower limit is under the control of the system.

For the initial timer fire at start, the upper limit to the allowable delay is set to leeway nanoseconds. For the subsequent timer fires at start + N * interval, the upper limit is MIN( leeway, interval / 2 ).

The lower limit to the allowable delay may vary with process state such as visibility of application UI. If the specified timer source was created with a mask of DISPATCH_TIMER_STRICT, the system will make a best effort to strictly observe the provided leeway value even if it is smaller than the current lower limit. Note that a minimal amount of delay is to be expected even if this flag is specified.

The start argument also determines which clock will be used for the timer: If start is DISPATCH_TIME_NOW or was created with dispatch_time(3), the timer is based on up time (which is obtained from () on Apple platforms). If start was created with dispatch_walltime(3), the timer is based on gettimeofday(3).

DISPATCH_SOURCE_TYPE_VNODE

Sources of this type monitor the virtual filesystem nodes for state changes. The handle is a file descriptor (int) referencing the node to monitor, and the mask may be one or more of the following:

• DISPATCH_VNODE_DELETE
The referenced node was removed from the filesystem namespace via unlink(2).
• DISPATCH_VNODE_WRITE
A write to the referenced file occurred.
• DISPATCH_VNODE_EXTEND
The referenced file was extended.
• DISPATCH_VNODE_ATTRIB
The metadata attributes of the referenced node have changed.
• DISPATCH_VNODE_LINK
The link count on the referenced node has changed.
• DISPATCH_VNODE_RENAME
The referenced node was renamed.
• DISPATCH_VNODE_REVOKE
Access to the referenced node was revoked via revoke(2) or the underlying fileystem was unmounted.
• DISPATCH_VNODE_FUNLOCK
The referenced file was unlocked by flock(2) or close(2).

The data returned by () is a bitmask that indicates which of the events in the mask were observed.

DISPATCH_SOURCE_TYPE_WRITE

Sources of this type monitor file descriptors for available write buffer space. The handle is the file descriptor (int) to monitor and the mask is unused and should be zero.

Users of this source type are strongly encouraged to perform non-blocking I/O and handle any truncated reads or error conditions that may occur. See fcntl(2) for additional information about setting the O_NONBLOCK flag on a file descriptor.

dispatch(3), dispatch_object(3), dispatch_queue_create(3)

May 1, 2009 Darwin