VICTRONUPS(8) NUT Manual VICTRONUPS(8)

victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

victronups -h

victronups -a UPS_NAME [OPTIONS]


Note

This man page only documents the hardware-specific features of the the victronups driver. For information about the core driver, see nutupsdrv(8).

The victronups driver should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.

The Match Lite line may only report a handful of variables. This is usually not a bug - they just don’t support anything else.

If your Victron cable is broken or missing, use this diagram to build a clone:

•docs/cables/ge-imv-victron.txt

This driver supports the following optional setting in the ups.conf(5):

modelname=name

Set model name

usd=delay

Set delay before shutdown on UPS

The protocol for this UPS is not officially documented.

•Radek Benedikt <benedikt@lphard.cz>
•Daniel Prynych <Daniel.Prynych@hornet.cz>

nutupsdrv(8)

The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

05/20/2024 Network UPS Tools 2.8.2