VICTRONUPS(8)                     NUT Manual                     VICTRONUPS(8)

NAME
       victronups - Driver for IMV/Victron UPS unit Match, Match Lite, NetUps

NOTE
       This man page only documents the hardware-specific features of the the
       victronups driver. For information about the core driver, see
       nutupsdrv(8).

SUPPORTED HARDWARE
       The victronups driver should recognize all Victron models that use a
       serial protocol at 1200 bps. These include Match Lite, Match and the
       NetUps line.

       The Match Lite line may only report a handful of variables. This is
       usually not a bug - they just don't support anything else.

CABLING
       If your Victron cable is broken or missing, use this diagram to build a
       clone:

       o   https://github.com/networkupstools/nut/blob/master/docs/cables/ge-imv-victron.txt

       o   docs/cables/ge-imv-victron.txt

EXTRA ARGUMENTS
       This driver supports the following optional setting in the ups.conf(5):

       modelname=name
           Set model name

       usd=delay
           Set delay before shutdown on UPS

BUGS
       The protocol for this UPS is not officially documented.

AUTHORS
       o   Radek Benedikt <benedikt@lphard.cz>

       o   Daniel Prynych <Daniel.Prynych@hornet.cz>

SEE ALSO
   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

Network UPS Tools 2.8.1           04/06/2024                     VICTRONUPS(8)