For details on bar subcommands, see sway-bar(5).

Sets the default container layout for tiled containers.

Includes another file from path. path can be either a full path or a path relative to the parent config, and expands shell syntax (see wordexp(3) for details). The same include file can only be included once; subsequent attempts will be ignored.

Executes custom background command. Default is swaybg. Refer to sway-output(5) for more information.

It can be disabled by setting the command to a single dash: swaybg_command -

Executes custom command for swaynag. Default is swaynag. Additional arguments may be appended to the end. This should only be used to either direct sway to call swaynag from a custom path or to provide additional arguments. This should be placed at the top of the config for the best results.

It can be disabled by setting the command to a single dash: swaynag_command -

Specifies the initial layout for new containers in an empty workspace.

Enables or disables Xwayland support, which allows X11 applications to be used. enable will lazily load Xwayland so Xwayland will not be launched until the first client attempts to connect. In some cases, such as slower machines, it may be desirable to have Xwayland started immediately by using force instead of enable.

Set border style for focused window. normal includes a border of thickness n and a title bar. pixel is a border without title bar n pixels thick. Default is normal with border thickness 2. csd is short for client-side-decorations, which allows the client to draw its own decorations.

Cycles through the available border styles.

Exit sway and end your Wayland session.

Make focused view floating, non-floating, or the opposite of what it is now.

Moves focus to the container that matches the specified criteria.

Moves focus to the next container in the specified direction.

Moves focus to the previous or next container in the current layout. By default, the last active child of the newly focused container will be focused. The sibling option indicates not to immediately focus a child of the container.

Moves focus to the last-focused child of the focused container.

Moves focus to the parent of the focused container.

Moves focus to the next output in the specified direction.

Moves focus to the named output.

Sets focus to the last focused tiling container.

Sets focus to the last focused floating container.

Moves focus between the floating and tiled layers.

Makes focused view fullscreen, non-fullscreen, or the opposite of what it is now. If no argument is given, it does the same as toggle. If global is specified, the view will be fullscreen across all outputs.

Changes the inner or outer gaps for either all workspaces or the current workspace. outer gaps can be altered per side with top, right, bottom, and left or per direction with horizontal and vertical.

Set/unset an idle inhibitor for the view. focus will inhibit idle when the view is focused by any seat. fullscreen will inhibit idle when the view is fullscreen (or a descendant of a fullscreen container) and is visible. open will inhibit idle until the view is closed (or the inhibitor is unset/changed). visible will inhibit idle when the view is visible on any output. none will remove any existing idle inhibitor for the view.

This can also be used with criteria to set an idle inhibitor for any existing view or with for_window to set idle inhibitors for future views.

Sets the layout mode of the focused container.

When using the stacking layout, only the focused window in the container is displayed, with the opened windows' list on the top of the container.

The tabbed layout is similar to stacking, but the windows’ list is vertically split.

Cycles the layout mode of the focused container though a preset list of layouts. If no argument is given, then it cycles through stacking, tabbed and the last split layout. If split is given, then it cycles through splith and splitv. If all is given, then it cycles through every layout.

Cycles the layout mode of the focused container through a list of layouts.

Controls when the relevant application is told to render this window, as a positive number of milliseconds before the next time sway composites the output. A smaller number leads to fresher rendered frames being composited by sway and lower perceived input latency, but if set too low, the application may not finish rendering before sway composites the output, leading to delayed frames.

When set to off, the relevant application is told to render this window immediately after display refresh. How much time is left for rendering before sway composites the output at that point depends on the output max_render_time setting.

To set this up for optimal latency:

1.

Set up output max_render_time (see sway-output(5)).

2.

Put the target application in full-screen and have it continuously render something.

3.

Start by setting max_render_time 1. If the application drops frames, increment by 1.

This setting only has an effect if a per-output max_render_time is in effect on the output the window is currently on. See sway-output(5) for further details.

Allows or disallows screen tearing as a result of immediate page flips for a fullscreen application.

When this option is not set, the tearing hints provided by the application determine whether tearing is allowed. When yes is specified, the application allows tearing regardless of the tearing hints. When no is specified, tearing will never be allowed on the application, regardless of the tearing hints.

This setting only has an effect if tearing is allowed on the output through the per-output allow_tearing setting. See sway-output(5) for further details.

Moves the focused container in the direction specified. The optional px argument specifies how many pixels to move the container. If unspecified, the default is 10 pixels. Pixels are ignored when moving tiled containers.

Moves the focused container to the specified position in the workspace. The position can be specified in pixels or percentage points, omitting the unit defaults to pixels. If absolute is used, the position is relative to all outputs. absolute can not be used with percentage points.

Moves the focused container to be centered on the workspace. If absolute is used, it is moved to the center of all outputs.

Moves the focused container to be centered on the cursor.

Moves the focused container to the specified mark.

Moves the focused container to the specified workspace. The string number is optional and is used to match a workspace with the same number, even if it has a different name.

Moves the focused container to the previous, next or current workspace on this output, or if no workspaces remain, the previous or next output.

Moves the focused container to the previous or next workspace on this output, wrapping around if already at the first or last workspace.

Moves the focused container to previously focused workspace.

Moves the focused container to the specified output.

Moves the focused container to next output in the specified direction.

Moves the focused container to the scratchpad.

Moves the focused workspace to the specified output.

Moves the focused workspace to the specified output.

Moves the focused workspace to next output in the specified direction.

Moves the focused workspace to next output in the specified direction.

A no operation command that can be used to override default behaviour. The optional comment argument is ignored, but logged for debugging purposes.

Reloads the sway config file and applies any changes. The config file is located at path specified by the command line arguments when started, otherwise according to the priority stated in sway(1).

Rename either <old_name> or the focused workspace to the <new_name>

Resizes the currently focused container by amount, specified in pixels or percentage points. If the units are omitted, floating containers are resized in px and tiled containers by ppt. amount will default to 10 if omitted.

Sets the height of the container to height, specified in pixels or percentage points. If the units are omitted, floating containers are resized in px and tiled containers by ppt. If height is 0, the container will not be resized.

Sets the width of the container to width, specified in pixels or percentage points. If the units are omitted, floating containers are resized in px and tiled containers by ppt. If width is 0, the container will not be resized.

Sets the width and height of the container to width and height, specified in pixels or percentage points. If the units are omitted, floating containers are resized in px and tiled containers by ppt. If width or height is 0, the container will not be resized on that axis.

Shows a window from the scratchpad. Repeatedly using this command will cycle through the windows in the scratchpad.

Enables or disables the ability of clients to inhibit keyboard shortcuts for a view. This is primarily useful for virtualization and remote desktop software. It affects either the currently focused view or a set of views selected by criteria. Subcommand disable additionally deactivates any active inhibitors for the given view(s). Criteria are particularly useful with the for_window command to configure a class of views differently from the per-seat defaults established by the seat subcommand of the same name. See sway-input(5) for more ways to affect inhibitors.

Splits the current container, vertically or horizontally. When none is specified, the effect of a previous split is undone if the current container is the only child of a split parent. When toggle is specified, the current container is split opposite to the parent container's layout.

Equivalent to split horizontal

Equivalent to split vertical

Equivalent to split toggle

"Sticks" a floating window to the current output so that it shows up on all workspaces.

Swaps the position, geometry, and fullscreen status of two containers. The first container can be selected either by criteria or focus. The second container can be selected by id, con_id, or mark. id can only be used with xwayland views. If the first container has focus, it will retain focus unless it is moved to a different workspace or the second container becomes fullscreen on the same workspace as the first container. In either of those cases, the second container will gain focus.

Sets the format of window titles. The following placeholders may be used:

This command is typically used with for_window criteria. For example:

Note that markup requires pango to be enabled via the font command.

The default format is "%title".

Assigns views matching criteria (see CRITERIA for details) to workspace. The → (U+2192) is optional and cosmetic. This command is equivalent to:

Assigns views matching criteria (see CRITERIA for details) to the specified output. The → (U+2192) is optional and cosmetic. This command is equivalent to:

Binds key combo to execute the sway command command when pressed. You may use XKB key names here (wev(1) is a good tool for discovering these). With the flag --release, the command is executed when the key combo is released. If input-device is given, the binding will only be executed for that input device and will be executed instead of any binding that is generic to all devices. If a group number is given, then the binding will only be available for that group. By default, if you overwrite a binding, swaynag will give you a warning. To silence this, use the --no-warn flag.

For specifying modifier keys, you can use the XKB modifier names Shift, Lock (for Caps Lock), Control, Mod1 (for Alt), Mod2 (for Num Lock), Mod3 (for XKB modifier Mod3), Mod4 (for the Logo key), and Mod5 (for AltGr). In addition, you can use the aliases Ctrl (for Control), Alt (for Alt), and Super (for the Logo key).

Unless the flag --locked is set, the command will not be run when a screen locking program is active. If there is a matching binding with and without --locked, the one with will be preferred when locked and the one without will be preferred when unlocked. If there are matching bindings and one has both --input-device and --locked and the other has neither, the former will be preferred even when unlocked.

Unless the flag --inhibited is set, the command will not be run when a keyboard shortcuts inhibitor is active for the currently focused window. Such inhibitors are usually requested by remote desktop and virtualization software to enable the user to send keyboard shortcuts to the remote or virtual session. The --inhibited flag allows one to define bindings which will be exempt from pass-through to such software. The same preference logic as for --locked applies.

Unless the flag --no-repeat is set, the command will be run repeatedly when the key is held, according to the repeat settings specified in the input configuration.

Bindings to keysyms are layout-dependent. This can be changed with the --to-code flag. In this case, the keysyms will be translated into the corresponding keycodes in the first configured layout.

Mouse bindings operate on the container under the cursor instead of the container that has focus. Mouse buttons can either be specified in the form button[1-9] or by using the name of the event code (ex BTN_LEFT or BTN_RIGHT). For the former option, the buttons will be mapped to their values in X11 (1=left, 2=middle, 3=right, 4=scroll up, 5=scroll down, 6=scroll left, 7=scroll right, 8=back, 9=forward). For the latter option, you can find the event names using libinput debug-events.

The priority for matching bindings is as follows: input device, group, and locked state.

--whole-window, --border, and --exclude-titlebar are mouse-only options which affect the region in which the mouse bindings can be triggered. By default, mouse bindings are only triggered when over the title bar. With the --border option, the border of the window will be included in this region. With the --whole-window option, the cursor can be anywhere over a window including the title, border, and content. --exclude-titlebar can be used in conjunction with any other option to specify that the titlebar should be excluded from the region of consideration.

If --whole-window is given, the command can be triggered when the cursor is over an empty workspace. Using a mouse binding over a layer surface's exclusive region is not currently possible.

Example:

# Execute firefox when alt, shift, and f are pressed together
bindsym Mod1+Shift+f exec firefox

bindcode [--whole-window] [--border] [--exclude-titlebar] [--release] [--locked] [--input-device=<device>] [--no-warn] [--no-repeat] [--inhibited] [Group<1-4>+]<code> <command> is also available for binding with key/button codes instead of key/button names.

Binds <switch> to execute the sway command command on state changes. Supported switches are lid (laptop lid) and tablet (tablet mode) switches. Valid values for state are on, off and toggle. These switches are on when the device lid is shut and when tablet mode is active respectively. toggle is also supported to run a command both when the switch is toggled on or off.

Unless the flag --locked is set, the command will not be run when a screen locking program is active. If there is a matching binding with and without --locked, the one with will be preferred when locked and the one without will be preferred when unlocked.

If the --reload flag is given, the binding will also be executed when the config is reloaded. toggle bindings will not be executed on reload. The --locked flag will operate as normal so if the config is reloaded while locked and --locked is not given, the binding will not be executed.

By default, if you overwrite a binding, swaynag will give you a warning. To silence this, use the --no-warn flag.

Example:

# Show the virtual keyboard when tablet mode is entered.
bindswitch tablet:on busctl call --user sm.puri.OSK0 /sm/puri/OSK0 sm.puri.OSK0 SetVisible b true
# Log a message when the laptop lid is opened or closed.
bindswitch lid:toggle exec echo "Lid moved"

Binds gesture to execute the sway command command when detected. Currently supports the hold, pinch or swipe gesture. Optionally can be limited to bind to a certain number of fingers or, for a pinch or swipe gesture, to certain directions.

The fingers can be limited to any sensible number or left empty to accept any finger counts. Valid directions are up, down, left and right, as well as inward, outward, clockwise, counterclockwise for the pinch gesture. Multiple directions can be combined by a plus.

If a input-device is given, the binding will only be executed for that input device and will be executed instead of any binding that is generic to all devices. By default, if you overwrite a binding, swaynag will give you a warning. To silence this, use the --no-warn flag.

The --exact flag can be used to ensure a binding only matches when exactly all specified directions are matched and nothing more. If there is matching binding with --exact, it will be preferred.

The priority for matching bindings is as follows: input device, then exact matches followed by matches with the highest number of matching directions.

Gestures executed while the pointer is above a bar are not handled by sway. See the respective documentation, e.g. bindgesture in sway-bar(5).

Example:

# Allow switching between workspaces with left and right swipes
bindgesture swipe:right workspace prev
bindgesture swipe:left workspace next
# Allow container movements by pinching them
bindgesture pinch:inward+up move up
bindgesture pinch:inward+down move down
bindgesture pinch:inward+left move left
bindgesture pinch:inward+right move right

This command is ignored and is only present for i3 compatibility.

Configures the color of window borders and title bars. The first three colors are required. When omitted indicator will use a sane default and child_border will use the color set for background. Colors may be specified in hex, either as #RRGGBB or #RRGGBBAA.

The available classes are:

client.focused

client.focused_inactive

client.focused_tab_title

client.placeholder

client.unfocused

client.urgent

The meaning of each color is:

border

background

text

indicator

child_border

Set default border style for new tiled windows. Config reload won't affect existing windows, only newly created ones after the reload.

Set default border style for new floating windows. This only applies to windows that are spawned in floating mode, not windows that become floating afterwards.

Executes shell command with sh.

Like exec, but the shell command will be executed again after reload.

Specifies the maximum size of floating windows. -1 x -1 removes the upper limit. The default is 0 x 0, which will use the width and height of the entire output layout as the maximums

Specifies the minimum size of floating windows. The default is 75 x 50.

When the modifier key is held down, you may hold left click to move windows, and right click to resize them. Setting modifier to none disables this feature. If inverse is specified, left click is used for resizing and right click for moving.

If set to yes, moving your mouse over a window will focus that window. If set to always, the window under the cursor will always be focused, even after switching between workspaces.

This option determines what to do when a client requests window activation. If set to urgent, the urgent state will be set for that window. If set to focus, the window will become focused. If set to smart, the window will become focused only if it is already visible, otherwise the urgent state will be set. Default is urgent.

This option determines what to do when attempting to focus over the edge of a container. If set to no, the focused container will retain focus, if there are no other containers in the direction. If set to yes, focus will be wrapped to the opposite edge of the container, if there are no other containers in the direction. If set to force, focus will be wrapped to the opposite edge of the container, even if there are other containers in the direction. If set to workspace, focus will wrap like in the yes case and additionally wrap when moving outside of workspaces boundaries. Default is yes.

Sets font to use for the title bars. To enable support for pango markup, preface the font name with pango:. For example, monospace 10 is the default font. To enable support for pango markup, pango:monospace 10 should be used instead. Regardless of whether pango markup is enabled, font should be specified as a pango font description. For more information on pango font descriptions, see https://docs.gtk.org/Pango/type_func.FontDescription.from_string.html#description

If an application on another workspace sets an urgency hint, switching to this workspace may lead to immediate focus of the application, which also means the window decoration color would be immediately reset to client.focused. This may make it unnecessarily hard to tell which window originally raised the event. This option allows one to set a timeout in ms to delay the urgency hint reset.

Thickness of the titlebar border in pixels

Padding of the text in the titlebar. horizontal value affects horizontal padding of the text while vertical value affects vertical padding (space above and below text). Padding includes titlebar borders so their value should be greater than titlebar_border_thickness. If vertical value is not specified it is set to the horizontal value.

Whenever a window that matches criteria appears, run list of commands. See CRITERIA for more details.

Sets default amount pixels of inner or outer gap, where the inner affects spacing around each view and outer affects the spacing around each workspace. Outer gaps are in addition to inner gaps. To reduce or remove outer gaps, outer gaps can be set to a negative value. outer gaps can also be specified per side with top, right, bottom, and left or per direction with horizontal and vertical.

This affects new workspaces only, and is used when the workspace doesn't have its own gaps settings (see: workspace <ws> gaps ...).

Hides window borders adjacent to the screen edges. Default is none. The --i3 option enables i3-compatible behavior to hide the title bar on tabbed and stacked containers with one child. The smart|smart_no_gaps options are equivalent to setting smart_borders smart|no_gaps and hide_edge_borders none.

For details on input subcommands, see sway-input(5).

* may be used in lieu of a specific device name to configure all input devices. A list of input device names may be obtained via swaymsg -t get_inputs.

For details on seat subcommands, see sway-input(5).

Kills (closes) the currently focused container and all of its children.

If smart_borders are on, borders will only be enabled if the workspace has more than one visible child. If smart_borders is set to no_gaps, borders will only be enabled if the workspace has more than one visible child and gaps equal to zero.

If smart_gaps are on gaps will only be enabled if a workspace has more than one child. If smart_gaps are inverse_outer outer gaps will only be enabled if a workspace has exactly one child.

Marks are arbitrary labels that can be used to identify certain windows and then jump to them at a later time. Each identifier can only be set on a single window at a time since they act as a unique identifier. By default, mark sets identifier as the only mark on a window. --add will instead add identifier to the list of current marks for that window. If --toggle is specified mark will remove identifier if it is already marked.

Switches to the specified mode. The default mode is default.

The only valid mode-subcommands... are bindsym, bindcode, bindswitch, and set. If --pango_markup is given, then mode will be interpreted as pango markup.

If output is specified, the mouse will be moved to new outputs as you move focus between them. If container is specified, the mouse will be moved to the middle of the container on switch. Default is output.

Prevents windows matching <criteria> from being focused automatically when they're created. This has no effect on the first window in a workspace.

For details on output subcommands, see sway-output(5).

* may be used in lieu of a specific output name to configure all outputs. A list of output names may be obtained via swaymsg -t get_outputs.

Determines what to do when a fullscreen view opens a dialog. If smart (the default), the dialog will be displayed. If ignore, the dialog will not be rendered. If leave_fullscreen, the view will exit fullscreen mode and the dialog will be rendered.

Enable or disable the primary selection clipboard. May only be configured at launch. Default is enabled.

Sets variable $name to value. You can use the new variable in the arguments of future commands. When the variable is used, it can be escaped with an additional $ (ie $$name) to have the replacement happen at run time instead of when reading the config. However, it does not always make sense for the variable to be replaced at run time since some arguments do need to be known at config time.

If show_marks is yes, marks will be displayed in the window borders. Any mark that starts with an underscore will not be drawn even if show_marks is yes. The default is yes.

Adjusts the opacity of the window between 0 (completely transparent) and 1 (completely opaque). If the operation is omitted, set will be used.

Sets whether or not tiling containers can be dragged with the mouse. If enabled (default), the floating_mod can be used to drag tiling, as well as floating, containers. Using the left mouse button on title bars without the floating_mod will also allow the container to be dragged. toggle should not be used in the config file.

Sets the threshold that must be exceeded for a container to be dragged by its titlebar. This has no effect if floating_mod is used or if tiling_drag is set to disable. Once the threshold has been exceeded once, the drag starts and the cursor can come back inside the threshold without stopping the drag. threshold is multiplied by the scale of the output that the cursor on. The default is 9.

Sets the title alignment. If right is selected and show_marks is set to yes, the marks will be shown on the left side instead of the right side.

Removes a binding for when <switch> changes to <state>.

Removes a binding for the specified gesture, fingers and directions combination.

Removes the binding for key combo that was previously bound with the given flags. If input-device is given, only the binding for that input device will be unbound.

unbindcode [--whole-window] [--border] [--exclude-titlebar] [--release] [--locked] [--input-device=<device>] <code> is also available for unbinding with key/button codes instead of key/button names.

unmark will remove identifier from the list of current marks on a window. If identifier is omitted, all marks are removed.

Using enable or disable manually sets or unsets the window's urgent state. Using allow or deny controls the window's ability to set itself as urgent. By default, windows are allowed to set their own urgency.

Switches to the specified workspace. The num: portion of the name is optional and will be used for ordering. If num: is not given and name is a number, then it will be also be used for ordering.

If the no-auto-back-and-forth option is given, then this command will not perform a back-and-forth operation when the workspace is already focused and workspace_auto_back_and_forth is enabled.

If the number keyword is specified and a workspace with the number already exists, then the workspace with the number will be used. If a workspace with the number does not exist, a new workspace will be created with the name name.

Switches to the next workspace on the current output or on the next output if currently on the last workspace.

Switches to the next workspace on the current output.

Switches to the previously focused workspace.

Specifies that workspace name should have the given gaps settings when it is created.

This command does not affect existing workspaces. To alter the gaps of an existing workspace, use the gaps command.

Specifies that workspace name should be shown on the specified outputs. Multiple outputs can be listed and the first available will be used. If the workspace gets placed on an output further down the list and an output that is higher on the list becomes available, the workspace will be moved to the higher priority output.

This command does not affect existing workspaces. To move an existing workspace, use the move command in combination with the workspace criteria (non-empty workspaces only) or workspace command (to switch to the workspace before moving).

When yes, repeating a workspace switch command will switch back to the prior workspace. For example, if you are currently on workspace 1, switch to workspace 2, then invoke the workspace 2 command again, you will be returned to workspace 1. Default is no.