git-merge - Join two or more development histories together
git merge [-n] [--stat] [--no-commit] [--squash] [--[no-]edit]
[--no-verify] [-s <strategy>] [-X <strategy-option>] [-S[<keyid>]]
[--[no-]allow-unrelated-histories]
[--[no-]rerere-autoupdate] [-m <msg>] [-F <file>]
[--into-name <branch>] [<commit>...]
git merge (--continue | --abort | --quit)
Incorporates changes from the named commits (since the time their
histories diverged from the current branch) into the current branch. This
command is used by git pull to incorporate changes from another
repository and can be used by hand to merge changes from one branch into
another.
Assume the following history exists and the current branch is
master:
A---B---C topic
/
D---E---F---G master
Then git merge topic will replay the changes made on the
topic branch since it diverged from master (i.e., E)
until its current commit (C) on top of master, and record the
result in a new commit along with the names of the two parent commits and a
log message from the user describing the changes. Before the operation,
ORIG_HEAD is set to the tip of the current branch (C).
A---B---C topic
/ \
D---E---F---G---H master
A merge stops if there’s a conflict that cannot be resolved
automatically or if --no-commit was provided when initiating the
merge. At that point you can run git merge --abort or git merge
--continue.
git merge --abort will abort the merge process and try to
reconstruct the pre-merge state. However, if there were uncommitted changes
when the merge started (and especially if those changes were further
modified after the merge was started), git merge --abort will in some
cases be unable to reconstruct the original (pre-merge) changes.
Therefore:
Warning: Running git merge with non-trivial
uncommitted changes is discouraged: while possible, it may leave you in a
state that is hard to back out of in the case of a conflict.
--commit, --no-commit
Perform the merge and commit the result. This option can
be used to override --no-commit.
With --no-commit perform the merge and stop just before creating a
merge commit, to give the user a chance to inspect and further tweak the
merge result before committing.
Note that fast-forward updates do not create a merge commit and
therefore there is no way to stop those merges with --no-commit. Thus, if
you want to ensure your branch is not changed or updated by the merge
command, use --no-ff with --no-commit.
--edit, -e, --no-edit
Invoke an editor before committing successful mechanical
merge to further edit the auto-generated merge message, so that the user can
explain and justify the merge. The
--no-edit option can be used to
accept the auto-generated message (this is generally discouraged). The
--edit (or
-e) option is still useful if you are giving a draft
message with the
-m option from the command line and want to edit it in
the editor.
Older scripts may depend on the historical behaviour of not
allowing the user to edit the merge log message. They will see an editor
opened when they run git merge. To make it easier to adjust such
scripts to the updated behaviour, the environment variable
GIT_MERGE_AUTOEDIT can be set to no at the beginning of
them.
--cleanup=<mode>
This option determines how the merge message will be
cleaned up before committing. See
git-commit(1) for more details. In
addition, if the
<mode> is given a value of
scissors,
scissors will be appended to
MERGE_MSG before being passed on to the
commit machinery in the case of a merge conflict.
--ff, --no-ff, --ff-only
Specifies how a merge is handled when the merged-in
history is already a descendant of the current history.
--ff is the
default unless merging an annotated (and possibly signed) tag that is not
stored in its natural place in the
refs/tags/ hierarchy, in which case
--no-ff is assumed.
With --ff, when possible resolve the merge as a
fast-forward (only update the branch pointer to match the merged branch; do
not create a merge commit). When not possible (when the merged-in history is
not a descendant of the current history), create a merge commit.
With --no-ff, create a merge commit in all cases, even when
the merge could instead be resolved as a fast-forward.
With --ff-only, resolve the merge as a fast-forward when
possible. When not possible, refuse to merge and exit with a non-zero
status.
-S[<keyid>], --gpg-sign[=<keyid>], --no-gpg-sign
GPG-sign the resulting merge commit. The keyid
argument is optional and defaults to the committer identity; if specified, it
must be stuck to the option without a space. --no-gpg-sign is useful to
countermand both commit.gpgSign configuration variable, and earlier
--gpg-sign.
--log[=<n>], --no-log
In addition to branch names, populate the log message
with one-line descriptions from at most <n> actual commits that are
being merged. See also
git-fmt-merge-msg(1).
With --no-log do not list one-line descriptions from the actual
commits being merged.
--signoff, --no-signoff
Add a
Signed-off-by trailer by the committer at
the end of the commit log message. The meaning of a signoff depends on the
project to which you’re committing. For example, it may certify that
the committer has the rights to submit the work under the project’s
license or agrees to some contributor representation, such as a Developer
Certificate of Origin. (See
https://developercertificate.org for the
one used by the Linux kernel and Git projects.) Consult the documentation or
leadership of the project to which you’re contributing to understand
how the signoffs are used in that project.
The --no-signoff option can be used to countermand an earlier
--signoff option on the command line.
--stat, -n, --no-stat
Show a diffstat at the end of the merge. The diffstat is
also controlled by the configuration option merge.stat.
With -n or --no-stat do not show a diffstat at the end of the
merge.
--squash, --no-squash
Produce the working tree and index state as if a real
merge happened (except for the merge information), but do not actually make a
commit, move the
HEAD, or record
$GIT_DIR/MERGE_HEAD (to cause
the next
git commit command to create a merge commit). This allows you
to create a single commit on top of the current branch whose effect is the
same as merging another branch (or more in case of an octopus).
With --no-squash perform the merge and commit the result. This
option can be used to override --squash.
With --squash, --commit is not allowed, and will fail.
--[no-]verify
By default, the pre-merge and commit-msg hooks are run.
When
--no-verify is given, these are bypassed. See also
githooks(5).
-s <strategy>, --strategy=<strategy>
Use the given merge strategy; can be supplied more than
once to specify them in the order they should be tried. If there is no
-s option, a built-in list of strategies is used instead (ort
when merging a single head, octopus otherwise).
-X <option>, --strategy-option=<option>
Pass merge strategy specific option through to the merge
strategy.
--verify-signatures, --no-verify-signatures
Verify that the tip commit of the side branch being
merged is signed with a valid key, i.e. a key that has a valid uid: in the
default trust model, this means the signing key has been signed by a trusted
key. If the tip commit of the side branch is not signed with a valid key, the
merge is aborted.
--summary, --no-summary
Synonyms to --stat and --no-stat; these are deprecated
and will be removed in the future.
-q, --quiet
Operate quietly. Implies --no-progress.
-v, --verbose
Be verbose.
--progress, --no-progress
Turn progress on/off explicitly. If neither is specified,
progress is shown if standard error is connected to a terminal. Note that not
all merge strategies may support progress reporting.
--autostash, --no-autostash
Automatically create a temporary stash entry before the
operation begins, record it in the ref MERGE_AUTOSTASH and apply it
after the operation ends. This means that you can run the operation on a dirty
worktree. However, use with care: the final stash application after a
successful merge might result in non-trivial conflicts.
--allow-unrelated-histories
By default, git merge command refuses to merge
histories that do not share a common ancestor. This option can be used to
override this safety when merging histories of two projects that started their
lives independently. As that is a very rare occasion, no configuration
variable to enable this by default exists and will not be added.
-m <msg>
Set the commit message to be used for the merge commit
(in case one is created).
If --log is specified, a shortlog of the commits being
merged will be appended to the specified message.
The git fmt-merge-msg command can be used to give a good
default for automated git merge invocations. The automated message
can include the branch description.
--into-name <branch>
Prepare the default merge message as if merging to the
branch <branch>, instead of the name of the real branch to which
the merge is made.
-F <file>, --file=<file>
Read the commit message to be used for the merge commit
(in case one is created).
If --log is specified, a shortlog of the commits being
merged will be appended to the specified message.
--rerere-autoupdate, --no-rerere-autoupdate
After the rerere mechanism reuses a recorded resolution
on the current conflict to update the files in the working tree, allow it to
also update the index with the result of resolution.
--no-rerere-autoupdate is a good way to double-check what rerere
did and catch potential mismerges, before committing the result to the index
with a separate git add.
--overwrite-ignore, --no-overwrite-ignore
Silently overwrite ignored files from the merge result.
This is the default behavior. Use --no-overwrite-ignore to abort.
--abort
Abort the current conflict resolution process, and try to
reconstruct the pre-merge state. If an autostash entry is present, apply it to
the worktree.
If there were uncommitted worktree changes present when the merge
started, git merge --abort will in some cases be unable to
reconstruct these changes. It is therefore recommended to always commit or
stash your changes before running git merge.
git merge --abort is equivalent to git reset --merge
when MERGE_HEAD is present unless MERGE_AUTOSTASH is also
present in which case git merge --abort applies the stash entry to
the worktree whereas git reset --merge will save the stashed changes
in the stash list.
--quit
Forget about the current merge in progress. Leave the
index and the working tree as-is. If MERGE_AUTOSTASH is present, the
stash entry will be saved to the stash list.
--continue
After a git merge stops due to conflicts you can
conclude the merge by running git merge --continue (see "HOW TO
RESOLVE CONFLICTS" section below).
<commit>...
Commits, usually other branch heads, to merge into our
branch. Specifying more than one commit will create a merge with more than two
parents (affectionately called an Octopus merge).
If no commit is given from the command line, merge the
remote-tracking branches that the current branch is configured to use as its
upstream. See also the configuration section of this manual page.
When FETCH_HEAD (and no other commit) is specified, the
branches recorded in the .git/FETCH_HEAD file by the previous
invocation of git fetch for merging are merged to the current
branch.
Before applying outside changes, you should get your own work in
good shape and committed locally, so it will not be clobbered if there are
conflicts. See also git-stash(1). git pull and git
merge will stop without doing anything when local uncommitted changes
overlap with files that git pull/git merge may need to
update.
To avoid recording unrelated changes in the merge commit, git
pull and git merge will also abort if there are any changes
registered in the index relative to the HEAD commit. (Special narrow
exceptions to this rule may exist depending on which merge strategy is in
use, but generally, the index must match HEAD.)
If all named commits are already ancestors of HEAD, git
merge will exit early with the message "Already up to
date."
Often the current branch head is an ancestor of the named commit.
This is the most common case especially when invoked from git pull:
you are tracking an upstream repository, you have committed no local
changes, and now you want to update to a newer upstream revision. In this
case, a new commit is not needed to store the combined history; instead, the
HEAD (along with the index) is updated to point at the named commit,
without creating an extra merge commit.
This behavior can be suppressed with the --no-ff
option.
Except in a fast-forward merge (see above), the branches to be
merged must be tied together by a merge commit that has both of them as its
parents.
A merged version reconciling the changes from all branches to be
merged is committed, and your HEAD, index, and working tree are
updated to it. It is possible to have modifications in the working tree as
long as they do not overlap; the update will preserve them.
When it is not obvious how to reconcile the changes, the following
happens:
1.The HEAD pointer stays the same.
2.The MERGE_HEAD ref is set to point to the other
branch head.
3.Paths that merged cleanly are updated both in the
index file and in your working tree.
4.For conflicting paths, the index file records up to
three versions: stage 1 stores the version from the common ancestor, stage 2
from HEAD, and stage 3 from MERGE_HEAD (you can inspect the
stages with git ls-files -u). The working tree files contain the result
of the merge operation; i.e. 3-way merge results with familiar conflict
markers <<< === >>>.
5.A ref named AUTO_MERGE is written, pointing to
a tree corresponding to the current content of the working tree (including
conflict markers for textual conflicts). Note that this ref is only written
when the ort merge strategy is used (the default).
6.No other changes are made. In particular, the local
modifications you had before you started merge will stay the same and the
index entries for them stay as they were, i.e. matching HEAD.
If you tried a merge which resulted in complex conflicts and want
to start over, you can recover with git merge --abort.
When merging an annotated (and possibly signed) tag, Git always
creates a merge commit even if a fast-forward merge is possible, and the
commit message template is prepared with the tag message. Additionally, if
the tag is signed, the signature check is reported as a comment in the
message template. See also git-tag(1).
When you want to just integrate with the work leading to the
commit that happens to be tagged, e.g. synchronizing with an upstream
release point, you may not want to make an unnecessary merge commit.
In such a case, you can "unwrap" the tag yourself before
feeding it to git merge, or pass --ff-only when you do not
have any work on your own. e.g.
git fetch origin
git merge v1.2.3^0
git merge --ff-only v1.2.3
During a merge, the working tree files are updated to reflect the
result of the merge. Among the changes made to the common ancestor’s
version, non-overlapping ones (that is, you changed an area of the file
while the other side left that area intact, or vice versa) are incorporated
in the final result verbatim. When both sides made changes to the same area,
however, Git cannot randomly pick one side over the other, and asks you to
resolve it by leaving what both sides did to that area.
By default, Git uses the same style as the one used by the
"merge" program from the RCS suite to present such a conflicted
hunk, like this:
Here are lines that are either unchanged from the common
ancestor, or cleanly resolved because only one side changed,
or cleanly resolved because both sides changed the same way.
<<<<<<< yours:sample.txt
Conflict resolution is hard;
let's go shopping.
=======
Git makes conflict resolution easy.
>>>>>>> theirs:sample.txt
And here is another line that is cleanly resolved or unmodified.
The area where a pair of conflicting changes happened is marked
with markers <<<<<<<, =======, and
>>>>>>>. The part before the ======= is
typically your side, and the part afterwards is typically their side.
The default format does not show what the original said in the
conflicting area. You cannot tell how many lines are deleted and replaced
with Barbie’s remark on your side. The only thing you can tell is
that your side wants to say it is hard and you’d prefer to go
shopping, while the other side wants to claim it is easy.
An alternative style can be used by setting the
merge.conflictStyle configuration variable to either
"diff3" or "zdiff3". In "diff3" style, the
above conflict may look like this:
Here are lines that are either unchanged from the common
ancestor, or cleanly resolved because only one side changed,
<<<<<<< yours:sample.txt
or cleanly resolved because both sides changed the same way.
Conflict resolution is hard;
let's go shopping.
||||||| base:sample.txt
or cleanly resolved because both sides changed identically.
Conflict resolution is hard.
=======
or cleanly resolved because both sides changed the same way.
Git makes conflict resolution easy.
>>>>>>> theirs:sample.txt
And here is another line that is cleanly resolved or unmodified.
while in "zdiff3" style, it may look like this:
Here are lines that are either unchanged from the common
ancestor, or cleanly resolved because only one side changed,
or cleanly resolved because both sides changed the same way.
<<<<<<< yours:sample.txt
Conflict resolution is hard;
let's go shopping.
||||||| base:sample.txt
or cleanly resolved because both sides changed identically.
Conflict resolution is hard.
=======
Git makes conflict resolution easy.
>>>>>>> theirs:sample.txt
And here is another line that is cleanly resolved or unmodified.
In addition to the <<<<<<<,
=======, and >>>>>>> markers, it uses
another ||||||| marker that is followed by the original text. You can
tell that the original just stated a fact, and your side simply gave in to
that statement and gave up, while the other side tried to have a more
positive attitude. You can sometimes come up with a better resolution by
viewing the original.
After seeing a conflict, you can do two things:
•Decide not to merge. The only clean-ups you need
are to reset the index file to the HEAD commit to reverse 2. and to
clean up working tree changes made by 2. and 3.; git merge --abort can
be used for this.
•Resolve the conflicts. Git will mark the
conflicts in the working tree. Edit the files into shape and git add
them to the index. Use git commit or git merge --continue to
seal the deal. The latter command checks whether there is a (interrupted)
merge in progress before calling git commit.
You can work through the conflict with a number of tools:
•Use a mergetool. git mergetool to launch a
graphical mergetool which will work through the merge with you.
•Look at the diffs. git diff will show a
three-way diff, highlighting changes from both the HEAD and
MERGE_HEAD versions. git diff AUTO_MERGE will show what changes
you’ve made so far to resolve textual conflicts.
•Look at the diffs from each branch. git log
--merge -p <path> will show diffs first for the HEAD version
and then the MERGE_HEAD version.
•Look at the originals. git show
:1:filename shows the common ancestor, git show :2:filename shows
the HEAD version, and git show :3:filename shows the
MERGE_HEAD version.
•Merge branches
fixes and
enhancements on top of the current branch, making an octopus merge:
$ git merge fixes enhancements
•Merge branch
obsolete into the current
branch, using
ours merge strategy:
$ git merge -s ours obsolete
•Merge branch
maint into the current
branch, but do not make a new commit automatically:
$ git merge --no-commit maint
This can be used when you want to include further changes to the
merge, or want to write your own merge commit message.
You should refrain from abusing this option to sneak substantial
changes into a merge commit. Small fixups like bumping release/version name
would be acceptable.
The merge mechanism (git merge and git pull
commands) allows the backend merge strategies to be chosen with
-s option. Some strategies can also take their own options, which can
be passed by giving -X<option> arguments to git merge
and/or git pull.
ort
This is the default merge strategy when pulling or
merging one branch. This strategy can only resolve two heads using a 3-way
merge algorithm. When there is more than one common ancestor that can be used
for 3-way merge, it creates a merged tree of the common ancestors and uses
that as the reference tree for the 3-way merge. This has been reported to
result in fewer merge conflicts without causing mismerges by tests done on
actual merge commits taken from Linux 2.6 kernel development history.
Additionally this strategy can detect and handle merges involving renames. It
does not make use of detected copies. The name for this algorithm is an
acronym ("Ostensibly Recursive’s Twin") and came from the
fact that it was written as a replacement for the previous default algorithm,
recursive.
The ort strategy can take the following options:
ours
This option forces conflicting hunks to be auto-resolved
cleanly by favoring
our version. Changes from the other tree that do
not conflict with our side are reflected in the merge result. For a binary
file, the entire contents are taken from our side.
This should not be confused with the ours merge strategy,
which does not even look at what the other tree contains at all. It discards
everything the other tree did, declaring our history contains all
that happened in it.
theirs
This is the opposite of ours; note that, unlike
ours, there is no theirs merge strategy to confuse this merge
option with.
ignore-space-change, ignore-all-space, ignore-space-at-eol,
ignore-cr-at-eol
Treats lines with the indicated type of whitespace change
as unchanged for the sake of a three-way merge. Whitespace changes mixed with
other changes to a line are not ignored. See also
git-diff(1)
-b,
-w,
--ignore-space-at-eol, and
--ignore-cr-at-eol.
•If their version only introduces
whitespace changes to a line, our version is used;
•If our version introduces whitespace
changes but their version includes a substantial change, their
version is used;
•Otherwise, the merge proceeds in the usual
way.
renormalize
This runs a virtual check-out and check-in of all three
stages of a file when resolving a three-way merge. This option is meant to be
used when merging branches with different clean filters or end-of-line
normalization rules. See "Merging branches with differing
checkin/checkout attributes" in
gitattributes(5) for
details.
no-renormalize
Disables the renormalize option. This overrides
the merge.renormalize configuration variable.
find-renames[=<n>]
Turn on rename detection, optionally setting the
similarity threshold. This is the default. This overrides the
merge.renames configuration variable. See also
git-diff(1)
--find-renames.
rename-threshold=<n>
Deprecated synonym for
find-renames=<n>.
subtree[=<path>]
This option is a more advanced form of subtree
strategy, where the strategy makes a guess on how two trees must be shifted to
match with each other when merging. Instead, the specified path is prefixed
(or stripped from the beginning) to make the shape of two trees to
match.
recursive
This can only resolve two heads using a 3-way merge
algorithm. When there is more than one common ancestor that can be used for
3-way merge, it creates a merged tree of the common ancestors and uses that as
the reference tree for the 3-way merge. This has been reported to result in
fewer merge conflicts without causing mismerges by tests done on actual merge
commits taken from Linux 2.6 kernel development history. Additionally this can
detect and handle merges involving renames. It does not make use of detected
copies. This was the default strategy for resolving two heads from Git
v0.99.9k until v2.33.0.
The recursive strategy takes the same options as
ort. However, there are three additional options that ort
ignores (not documented above) that are potentially useful with the
recursive strategy:
patience
Deprecated synonym for
diff-algorithm=patience.
diff-algorithm=[patience|minimal|histogram|myers]
Use a different diff algorithm while merging, which can
help avoid mismerges that occur due to unimportant matching lines (such as
braces from distinct functions). See also
git-diff(1)
--diff-algorithm. Note that
ort specifically uses
diff-algorithm=histogram, while
recursive defaults to the
diff.algorithm config setting.
no-renames
Turn off rename detection. This overrides the
merge.renames configuration variable. See also
git-diff(1)
--no-renames.
resolve
This can only resolve two heads (i.e. the current branch
and another branch you pulled from) using a 3-way merge algorithm. It tries to
carefully detect criss-cross merge ambiguities. It does not handle
renames.
octopus
This resolves cases with more than two heads, but refuses
to do a complex merge that needs manual resolution. It is primarily meant to
be used for bundling topic branch heads together. This is the default merge
strategy when pulling or merging more than one branch.
ours
This resolves any number of heads, but the resulting tree
of the merge is always that of the current branch head, effectively ignoring
all changes from all other branches. It is meant to be used to supersede old
development history of side branches. Note that this is different from the
-Xours option to the recursive merge strategy.
subtree
This is a modified ort strategy. When merging
trees A and B, if B corresponds to a subtree of A, B is first adjusted to
match the tree structure of A, instead of reading the trees at the same level.
This adjustment is also done to the common ancestor tree.
With the strategies that use 3-way merge (including the default,
ort), if a change is made on both branches, but later reverted on one
of the branches, that change will be present in the merged result; some
people find this behavior confusing. It occurs because only the heads and
the merge base are considered when performing a merge, not the individual
commits. The merge algorithm therefore considers the reverted change as no
change at all, and substitutes the changed version instead.
branch.<name>.mergeOptions
Sets default options for merging into branch
<name>. The syntax and supported options are the same as those of git
merge, but option values containing whitespace characters are currently
not supported.
Everything above this line in this section isn’t included
from the git-config(1) documentation. The content that follows is the
same as what’s found there:
merge.conflictStyle
Specify the style in which conflicted hunks are written
out to working tree files upon merge. The default is "merge", which
shows a <<<<<<< conflict marker, changes made by
one side, a ======= marker, changes made by the other side, and then a
>>>>>>> marker. An alternate style,
"diff3", adds a ||||||| marker and the original text before
the ======= marker. The "merge" style tends to produce
smaller conflict regions than diff3, both because of the exclusion of the
original text, and because when a subset of lines match on the two sides, they
are just pulled out of the conflict region. Another alternate style,
"zdiff3", is similar to diff3 but removes matching lines on the two
sides from the conflict region when those matching lines appear near either
the beginning or end of a conflict region.
merge.defaultToUpstream
If merge is called without any commit argument, merge the
upstream branches configured for the current branch by using their last
observed values stored in their remote-tracking branches. The values of the
branch.<current branch>.merge that name the branches at the
remote named by branch.<current branch>.remote are consulted, and
then they are mapped via remote.<remote>.fetch to their
corresponding remote-tracking branches, and the tips of these tracking
branches are merged. Defaults to true.
merge.ff
By default, Git does not create an extra merge commit
when merging a commit that is a descendant of the current commit. Instead, the
tip of the current branch is fast-forwarded. When set to false, this
variable tells Git to create an extra merge commit in such a case (equivalent
to giving the --no-ff option from the command line). When set to
only, only such fast-forward merges are allowed (equivalent to giving
the --ff-only option from the command line).
merge.verifySignatures
If true, this is equivalent to the --verify-signatures
command line option. See
git-merge(1) for details.
merge.branchdesc
In addition to branch names, populate the log message
with the branch description text associated with them. Defaults to
false.
merge.log
In addition to branch names, populate the log message
with at most the specified number of one-line descriptions from the actual
commits that are being merged. Defaults to false, and true is a synonym for
20.
merge.suppressDest
By adding a glob that matches the names of integration
branches to this multi-valued configuration variable, the default merge
message computed for merges into these integration branches will omit
"into <branch name>" from its title.
An element with an empty value can be used to clear the list of
globs accumulated from previous configuration entries. When there is no
merge.suppressDest variable defined, the default value of
master is used for backward compatibility.
merge.renameLimit
The number of files to consider in the exhaustive portion
of rename detection during a merge. If not specified, defaults to the value of
diff.renameLimit. If neither merge.renameLimit nor diff.renameLimit are
specified, currently defaults to 7000. This setting has no effect if rename
detection is turned off.
merge.renames
Whether Git detects renames. If set to "false",
rename detection is disabled. If set to "true", basic rename
detection is enabled. Defaults to the value of diff.renames.
merge.directoryRenames
Whether Git detects directory renames, affecting what
happens at merge time to new files added to a directory on one side of history
when that directory was renamed on the other side of history. If
merge.directoryRenames is set to "false", directory rename detection
is disabled, meaning that such new files will be left behind in the old
directory. If set to "true", directory rename detection is enabled,
meaning that such new files will be moved into the new directory. If set to
"conflict", a conflict will be reported for such paths. If
merge.renames is false, merge.directoryRenames is ignored and treated as
false. Defaults to "conflict".
merge.renormalize
Tell Git that canonical representation of files in the
repository has changed over time (e.g. earlier commits record text files with
CRLF line endings, but recent ones use LF line endings). In such a repository,
Git can convert the data recorded in commits to a canonical form before
performing a merge to reduce unnecessary conflicts. For more information, see
section "Merging branches with differing checkin/checkout
attributes" in
gitattributes(5).
merge.stat
Whether to print the diffstat between ORIG_HEAD and the
merge result at the end of the merge. True by default.
merge.autoStash
When set to true, automatically create a temporary stash
entry before the operation begins, and apply it after the operation ends. This
means that you can run merge on a dirty worktree. However, use with care: the
final stash application after a successful merge might result in non-trivial
conflicts. This option can be overridden by the
--no-autostash and
--autostash options of
git-merge(1). Defaults to false.
merge.tool
Controls which merge tool is used by
git-mergetool(1). The list below shows the valid built-in values. Any
other value is treated as a custom merge tool and requires that a
corresponding mergetool.<tool>.cmd variable is defined.
merge.guitool
Controls which merge tool is used by
git-mergetool(1) when the -g/--gui flag is specified. The list below
shows the valid built-in values. Any other value is treated as a custom merge
tool and requires that a corresponding mergetool.<guitool>.cmd variable
is defined.
araxis
Use Araxis Merge (requires a graphical session)
bc
Use Beyond Compare (requires a graphical session)
bc3
Use Beyond Compare (requires a graphical session)
bc4
Use Beyond Compare (requires a graphical session)
codecompare
Use Code Compare (requires a graphical session)
deltawalker
Use DeltaWalker (requires a graphical session)
diffmerge
Use DiffMerge (requires a graphical session)
diffuse
Use Diffuse (requires a graphical session)
ecmerge
Use ECMerge (requires a graphical session)
emerge
Use Emacs' Emerge
examdiff
Use ExamDiff Pro (requires a graphical session)
guiffy
Use Guiffy’s Diff Tool (requires a graphical
session)
gvimdiff
Use gVim (requires a graphical session) with a custom
layout (see git help mergetool's BACKEND SPECIFIC HINTS
section)
gvimdiff1
Use gVim (requires a graphical session) with a 2 panes
layout (LOCAL and REMOTE)
gvimdiff2
Use gVim (requires a graphical session) with a 3 panes
layout (LOCAL, MERGED and REMOTE)
gvimdiff3
Use gVim (requires a graphical session) where only the
MERGED file is shown
kdiff3
Use KDiff3 (requires a graphical session)
meld
Use Meld (requires a graphical session) with optional
auto merge (see git help mergetool's CONFIGURATION
section)
nvimdiff
Use Neovim with a custom layout (see git help
mergetool's BACKEND SPECIFIC HINTS section)
nvimdiff1
Use Neovim with a 2 panes layout (LOCAL and REMOTE)
nvimdiff2
Use Neovim with a 3 panes layout (LOCAL, MERGED and
REMOTE)
nvimdiff3
Use Neovim where only the MERGED file is shown
opendiff
Use FileMerge (requires a graphical session)
p4merge
Use HelixCore P4Merge (requires a graphical
session)
smerge
Use Sublime Merge (requires a graphical session)
tkdiff
Use TkDiff (requires a graphical session)
tortoisemerge
Use TortoiseMerge (requires a graphical session)
vimdiff
Use Vim with a custom layout (see git help
mergetool's BACKEND SPECIFIC HINTS section)
vimdiff1
Use Vim with a 2 panes layout (LOCAL and REMOTE)
vimdiff2
Use Vim with a 3 panes layout (LOCAL, MERGED and
REMOTE)
vimdiff3
Use Vim where only the MERGED file is shown
vscode
Use Visual Studio Code (requires a graphical
session)
winmerge
Use WinMerge (requires a graphical session)
xxdiff
Use xxdiff (requires a graphical session)
merge.verbosity
Controls the amount of output shown by the recursive
merge strategy. Level 0 outputs nothing except a final error message if
conflicts were detected. Level 1 outputs only conflicts, 2 outputs conflicts
and file changes. Level 5 and above outputs debugging information. The default
is level 2. Can be overridden by the GIT_MERGE_VERBOSITY environment
variable.
merge.<driver>.name
Defines a human-readable name for a custom low-level
merge driver. See
gitattributes(5) for details.
merge.<driver>.driver
Defines the command that implements a custom low-level
merge driver. See
gitattributes(5) for details.
merge.<driver>.recursive
Names a low-level merge driver to be used when performing
an internal merge between common ancestors. See
gitattributes(5) for
details.