SRC/zgejsv.f(3) Library Functions Manual SRC/zgejsv.f(3)

SRC/zgejsv.f


subroutine zgejsv (joba, jobu, jobv, jobr, jobt, jobp, m, n, a, lda, sva, u, ldu, v, ldv, cwork, lwork, rwork, lrwork, iwork, info)
ZGEJSV

ZGEJSV

Purpose:

 ZGEJSV computes the singular value decomposition (SVD) of a complex M-by-N
 matrix [A], where M >= N. The SVD of [A] is written as
              [A] = [U] * [SIGMA] * [V]^*,
 where [SIGMA] is an N-by-N (M-by-N) matrix which is zero except for its N
 diagonal elements, [U] is an M-by-N (or M-by-M) unitary matrix, and
 [V] is an N-by-N unitary matrix. The diagonal elements of [SIGMA] are
 the singular values of [A]. The columns of [U] and [V] are the left and
 the right singular vectors of [A], respectively. The matrices [U] and [V]
 are computed and stored in the arrays U and V, respectively. The diagonal
 of [SIGMA] is computed and stored in the array SVA.

Parameters

JOBA
          JOBA is CHARACTER*1
         Specifies the level of accuracy:
       = 'C': This option works well (high relative accuracy) if A = B * D,
              with well-conditioned B and arbitrary diagonal matrix D.
              The accuracy cannot be spoiled by COLUMN scaling. The
              accuracy of the computed output depends on the condition of
              B, and the procedure aims at the best theoretical accuracy.
              The relative error max_{i=1:N}|d sigma_i| / sigma_i is
              bounded by f(M,N)*epsilon* cond(B), independent of D.
              The input matrix is preprocessed with the QRF with column
              pivoting. This initial preprocessing and preconditioning by
              a rank revealing QR factorization is common for all values of
              JOBA. Additional actions are specified as follows:
       = 'E': Computation as with 'C' with an additional estimate of the
              condition number of B. It provides a realistic error bound.
       = 'F': If A = D1 * C * D2 with ill-conditioned diagonal scalings
              D1, D2, and well-conditioned matrix C, this option gives
              higher accuracy than the 'C' option. If the structure of the
              input matrix is not known, and relative accuracy is
              desirable, then this option is advisable. The input matrix A
              is preprocessed with QR factorization with FULL (row and
              column) pivoting.
       = 'G': Computation as with 'F' with an additional estimate of the
              condition number of B, where A=B*D. If A has heavily weighted
              rows, then using this condition number gives too pessimistic
              error bound.
       = 'A': Small singular values are not well determined by the data 
              and are considered as noisy; the matrix is treated as
              numerically rank deficient. The error in the computed
              singular values is bounded by f(m,n)*epsilon*||A||.
              The computed SVD A = U * S * V^* restores A up to
              f(m,n)*epsilon*||A||.
              This gives the procedure the licence to discard (set to zero)
              all singular values below N*epsilon*||A||.
       = 'R': Similar as in 'A'. Rank revealing property of the initial
              QR factorization is used do reveal (using triangular factor)
              a gap sigma_{r+1} < epsilon * sigma_r in which case the
              numerical RANK is declared to be r. The SVD is computed with
              absolute error bounds, but more accurately than with 'A'.

JOBU

          JOBU is CHARACTER*1
         Specifies whether to compute the columns of U:
       = 'U': N columns of U are returned in the array U.
       = 'F': full set of M left sing. vectors is returned in the array U.
       = 'W': U may be used as workspace of length M*N. See the description
              of U.
       = 'N': U is not computed.

JOBV

          JOBV is CHARACTER*1
         Specifies whether to compute the matrix V:
       = 'V': N columns of V are returned in the array V; Jacobi rotations
              are not explicitly accumulated.
       = 'J': N columns of V are returned in the array V, but they are
              computed as the product of Jacobi rotations, if JOBT = 'N'.
       = 'W': V may be used as workspace of length N*N. See the description
              of V.
       = 'N': V is not computed.

JOBR

          JOBR is CHARACTER*1
         Specifies the RANGE for the singular values. Issues the licence to
         set to zero small positive singular values if they are outside
         specified range. If A .NE. 0 is scaled so that the largest singular
         value of c*A is around SQRT(BIG), BIG=DLAMCH('O'), then JOBR issues
         the licence to kill columns of A whose norm in c*A is less than
         SQRT(SFMIN) (for JOBR = 'R'), or less than SMALL=SFMIN/EPSLN,
         where SFMIN=DLAMCH('S'), EPSLN=DLAMCH('E').
       = 'N': Do not kill small columns of c*A. This option assumes that
              BLAS and QR factorizations and triangular solvers are
              implemented to work in that range. If the condition of A
              is greater than BIG, use ZGESVJ.
       = 'R': RESTRICTED range for sigma(c*A) is [SQRT(SFMIN), SQRT(BIG)]
              (roughly, as described above). This option is recommended.
                                             ===========================
         For computing the singular values in the FULL range [SFMIN,BIG]
         use ZGESVJ.

JOBT

          JOBT is CHARACTER*1
         If the matrix is square then the procedure may determine to use
         transposed A if A^* seems to be better with respect to convergence.
         If the matrix is not square, JOBT is ignored. 
         The decision is based on two values of entropy over the adjoint
         orbit of A^* * A. See the descriptions of RWORK(6) and RWORK(7).
       = 'T': transpose if entropy test indicates possibly faster
         convergence of Jacobi process if A^* is taken as input. If A is
         replaced with A^*, then the row pivoting is included automatically.
       = 'N': do not speculate.
         The option 'T' can be used to compute only the singular values, or
         the full SVD (U, SIGMA and V). For only one set of singular vectors
         (U or V), the caller should provide both U and V, as one of the
         matrices is used as workspace if the matrix A is transposed.
         The implementer can easily remove this constraint and make the
         code more complicated. See the descriptions of U and V.
         In general, this option is considered experimental, and 'N'; should
         be preferred. This is subject to changes in the future.

JOBP

          JOBP is CHARACTER*1
         Issues the licence to introduce structured perturbations to drown
         denormalized numbers. This licence should be active if the
         denormals are poorly implemented, causing slow computation,
         especially in cases of fast convergence (!). For details see [1,2].
         For the sake of simplicity, this perturbations are included only
         when the full SVD or only the singular values are requested. The
         implementer/user can easily add the perturbation for the cases of
         computing one set of singular vectors.
       = 'P': introduce perturbation
       = 'N': do not perturb

M

          M is INTEGER
         The number of rows of the input matrix A.  M >= 0.

N

          N is INTEGER
         The number of columns of the input matrix A. M >= N >= 0.

A

          A is COMPLEX*16 array, dimension (LDA,N)
          On entry, the M-by-N matrix A.

LDA

          LDA is INTEGER
          The leading dimension of the array A.  LDA >= max(1,M).

SVA

          SVA is DOUBLE PRECISION array, dimension (N)
          On exit,
          - For RWORK(1)/RWORK(2) = ONE: The singular values of A. During
            the computation SVA contains Euclidean column norms of the
            iterated matrices in the array A.
          - For RWORK(1) .NE. RWORK(2): The singular values of A are
            (RWORK(1)/RWORK(2)) * SVA(1:N). This factored form is used if
            sigma_max(A) overflows or if small singular values have been
            saved from underflow by scaling the input matrix A.
          - If JOBR='R' then some of the singular values may be returned
            as exact zeros obtained by 'set to zero' because they are
            below the numerical rank threshold or are denormalized numbers.

U

          U is COMPLEX*16 array, dimension ( LDU, N )
          If JOBU = 'U', then U contains on exit the M-by-N matrix of
                         the left singular vectors.
          If JOBU = 'F', then U contains on exit the M-by-M matrix of
                         the left singular vectors, including an ONB
                         of the orthogonal complement of the Range(A).
          If JOBU = 'W'  .AND. (JOBV = 'V' .AND. JOBT = 'T' .AND. M = N),
                         then U is used as workspace if the procedure
                         replaces A with A^*. In that case, [V] is computed
                         in U as left singular vectors of A^* and then
                         copied back to the V array. This 'W' option is just
                         a reminder to the caller that in this case U is
                         reserved as workspace of length N*N.
          If JOBU = 'N'  U is not referenced, unless JOBT='T'.

LDU

          LDU is INTEGER
          The leading dimension of the array U,  LDU >= 1.
          IF  JOBU = 'U' or 'F' or 'W',  then LDU >= M.

V

          V is COMPLEX*16 array, dimension ( LDV, N )
          If JOBV = 'V', 'J' then V contains on exit the N-by-N matrix of
                         the right singular vectors;
          If JOBV = 'W', AND (JOBU = 'U' AND JOBT = 'T' AND M = N),
                         then V is used as workspace if the procedure
                         replaces A with A^*. In that case, [U] is computed
                         in V as right singular vectors of A^* and then
                         copied back to the U array. This 'W' option is just
                         a reminder to the caller that in this case V is
                         reserved as workspace of length N*N.
          If JOBV = 'N'  V is not referenced, unless JOBT='T'.

LDV

          LDV is INTEGER
          The leading dimension of the array V,  LDV >= 1.
          If JOBV = 'V' or 'J' or 'W', then LDV >= N.

CWORK

          CWORK is COMPLEX*16 array, dimension (MAX(2,LWORK))
          If the call to ZGEJSV is a workspace query (indicated by LWORK=-1 or
          LRWORK=-1), then on exit CWORK(1) contains the required length of
          CWORK for the job parameters used in the call.

LWORK

          LWORK is INTEGER
          Length of CWORK to confirm proper allocation of workspace.
          LWORK depends on the job:
          1. If only SIGMA is needed ( JOBU = 'N', JOBV = 'N' ) and
            1.1 .. no scaled condition estimate required (JOBA.NE.'E'.AND.JOBA.NE.'G'):
               LWORK >= 2*N+1. This is the minimal requirement.
               ->> For optimal performance (blocked code) the optimal value
               is LWORK >= N + (N+1)*NB. Here NB is the optimal
               block size for ZGEQP3 and ZGEQRF.
               In general, optimal LWORK is computed as
               LWORK >= max(N+LWORK(ZGEQP3),N+LWORK(ZGEQRF), LWORK(ZGESVJ)).
            1.2. .. an estimate of the scaled condition number of A is
               required (JOBA='E', or 'G'). In this case, LWORK the minimal
               requirement is LWORK >= N*N + 2*N.
               ->> For optimal performance (blocked code) the optimal value
               is LWORK >= max(N+(N+1)*NB, N*N+2*N)=N**2+2*N.
               In general, the optimal length LWORK is computed as
               LWORK >= max(N+LWORK(ZGEQP3),N+LWORK(ZGEQRF), LWORK(ZGESVJ),
                            N*N+LWORK(ZPOCON)).
          2. If SIGMA and the right singular vectors are needed (JOBV = 'V'),
             (JOBU = 'N')
            2.1   .. no scaled condition estimate requested (JOBE = 'N'):    
            -> the minimal requirement is LWORK >= 3*N.
            -> For optimal performance, 
               LWORK >= max(N+(N+1)*NB, 2*N+N*NB)=2*N+N*NB,
               where NB is the optimal block size for ZGEQP3, ZGEQRF, ZGELQF,
               ZUNMLQ. In general, the optimal length LWORK is computed as
               LWORK >= max(N+LWORK(ZGEQP3), N+LWORK(ZGESVJ),
                       N+LWORK(ZGELQF), 2*N+LWORK(ZGEQRF), N+LWORK(ZUNMLQ)).
            2.2 .. an estimate of the scaled condition number of A is
               required (JOBA='E', or 'G').
            -> the minimal requirement is LWORK >= 3*N.      
            -> For optimal performance, 
               LWORK >= max(N+(N+1)*NB, 2*N,2*N+N*NB)=2*N+N*NB,
               where NB is the optimal block size for ZGEQP3, ZGEQRF, ZGELQF,
               ZUNMLQ. In general, the optimal length LWORK is computed as
               LWORK >= max(N+LWORK(ZGEQP3), LWORK(ZPOCON), N+LWORK(ZGESVJ),
                       N+LWORK(ZGELQF), 2*N+LWORK(ZGEQRF), N+LWORK(ZUNMLQ)).   
          3. If SIGMA and the left singular vectors are needed
            3.1  .. no scaled condition estimate requested (JOBE = 'N'):
            -> the minimal requirement is LWORK >= 3*N.
            -> For optimal performance:
               if JOBU = 'U' :: LWORK >= max(3*N, N+(N+1)*NB, 2*N+N*NB)=2*N+N*NB,
               where NB is the optimal block size for ZGEQP3, ZGEQRF, ZUNMQR.
               In general, the optimal length LWORK is computed as
               LWORK >= max(N+LWORK(ZGEQP3), 2*N+LWORK(ZGEQRF), N+LWORK(ZUNMQR)). 
            3.2  .. an estimate of the scaled condition number of A is
               required (JOBA='E', or 'G').
            -> the minimal requirement is LWORK >= 3*N.
            -> For optimal performance:
               if JOBU = 'U' :: LWORK >= max(3*N, N+(N+1)*NB, 2*N+N*NB)=2*N+N*NB,
               where NB is the optimal block size for ZGEQP3, ZGEQRF, ZUNMQR.
               In general, the optimal length LWORK is computed as
               LWORK >= max(N+LWORK(ZGEQP3),N+LWORK(ZPOCON),
                        2*N+LWORK(ZGEQRF), N+LWORK(ZUNMQR)).
          4. If the full SVD is needed: (JOBU = 'U' or JOBU = 'F') and 
            4.1. if JOBV = 'V'  
               the minimal requirement is LWORK >= 5*N+2*N*N. 
            4.2. if JOBV = 'J' the minimal requirement is 
               LWORK >= 4*N+N*N.
            In both cases, the allocated CWORK can accommodate blocked runs
            of ZGEQP3, ZGEQRF, ZGELQF, SUNMQR, ZUNMLQ.
          If the call to ZGEJSV is a workspace query (indicated by LWORK=-1 or
          LRWORK=-1), then on exit CWORK(1) contains the optimal and CWORK(2) contains the
          minimal length of CWORK for the job parameters used in the call.

RWORK

          RWORK is DOUBLE PRECISION array, dimension (MAX(7,LRWORK))
          On exit,
          RWORK(1) = Determines the scaling factor SCALE = RWORK(2) / RWORK(1)
                    such that SCALE*SVA(1:N) are the computed singular values
                    of A. (See the description of SVA().)
          RWORK(2) = See the description of RWORK(1).
          RWORK(3) = SCONDA is an estimate for the condition number of
                    column equilibrated A. (If JOBA = 'E' or 'G')
                    SCONDA is an estimate of SQRT(||(R^* * R)^(-1)||_1).
                    It is computed using ZPOCON. It holds
                    N^(-1/4) * SCONDA <= ||R^(-1)||_2 <= N^(1/4) * SCONDA
                    where R is the triangular factor from the QRF of A.
                    However, if R is truncated and the numerical rank is
                    determined to be strictly smaller than N, SCONDA is
                    returned as -1, thus indicating that the smallest
                    singular values might be lost.
          If full SVD is needed, the following two condition numbers are
          useful for the analysis of the algorithm. They are provided for
          a developer/implementer who is familiar with the details of
          the method.
          RWORK(4) = an estimate of the scaled condition number of the
                    triangular factor in the first QR factorization.
          RWORK(5) = an estimate of the scaled condition number of the
                    triangular factor in the second QR factorization.
          The following two parameters are computed if JOBT = 'T'.
          They are provided for a developer/implementer who is familiar
          with the details of the method.
          RWORK(6) = the entropy of A^* * A :: this is the Shannon entropy
                    of diag(A^* * A) / Trace(A^* * A) taken as point in the
                    probability simplex.
          RWORK(7) = the entropy of A * A^*. (See the description of RWORK(6).)
          If the call to ZGEJSV is a workspace query (indicated by LWORK=-1 or
          LRWORK=-1), then on exit RWORK(1) contains the required length of
          RWORK for the job parameters used in the call.

LRWORK

          LRWORK is INTEGER
          Length of RWORK to confirm proper allocation of workspace.
          LRWORK depends on the job:
       1. If only the singular values are requested i.e. if
          LSAME(JOBU,'N') .AND. LSAME(JOBV,'N')
          then:
          1.1. If LSAME(JOBT,'T') .OR. LSAME(JOBA,'F') .OR. LSAME(JOBA,'G'),
               then: LRWORK = max( 7, 2 * M ).
          1.2. Otherwise, LRWORK  = max( 7,  N ).
       2. If singular values with the right singular vectors are requested
          i.e. if
          (LSAME(JOBV,'V').OR.LSAME(JOBV,'J')) .AND.
          .NOT.(LSAME(JOBU,'U').OR.LSAME(JOBU,'F'))
          then:
          2.1. If LSAME(JOBT,'T') .OR. LSAME(JOBA,'F') .OR. LSAME(JOBA,'G'),
          then LRWORK = max( 7, 2 * M ).
          2.2. Otherwise, LRWORK  = max( 7,  N ).
       3. If singular values with the left singular vectors are requested, i.e. if
          (LSAME(JOBU,'U').OR.LSAME(JOBU,'F')) .AND.
          .NOT.(LSAME(JOBV,'V').OR.LSAME(JOBV,'J'))
          then:
          3.1. If LSAME(JOBT,'T') .OR. LSAME(JOBA,'F') .OR. LSAME(JOBA,'G'),
          then LRWORK = max( 7, 2 * M ).
          3.2. Otherwise, LRWORK  = max( 7,  N ).
       4. If singular values with both the left and the right singular vectors
          are requested, i.e. if
          (LSAME(JOBU,'U').OR.LSAME(JOBU,'F')) .AND.
          (LSAME(JOBV,'V').OR.LSAME(JOBV,'J'))
          then:
          4.1. If LSAME(JOBT,'T') .OR. LSAME(JOBA,'F') .OR. LSAME(JOBA,'G'),
          then LRWORK = max( 7, 2 * M ).
          4.2. Otherwise, LRWORK  = max( 7, N ).
          If, on entry, LRWORK = -1 or LWORK=-1, a workspace query is assumed and 
          the length of RWORK is returned in RWORK(1). 

IWORK

          IWORK is INTEGER array, of dimension at least 4, that further depends 
          on the job:
          1. If only the singular values are requested then:
             If ( LSAME(JOBT,'T') .OR. LSAME(JOBA,'F') .OR. LSAME(JOBA,'G') ) 
             then the length of IWORK is N+M; otherwise the length of IWORK is N.
          2. If the singular values and the right singular vectors are requested then:
             If ( LSAME(JOBT,'T') .OR. LSAME(JOBA,'F') .OR. LSAME(JOBA,'G') ) 
             then the length of IWORK is N+M; otherwise the length of IWORK is N. 
          3. If the singular values and the left singular vectors are requested then:
             If ( LSAME(JOBT,'T') .OR. LSAME(JOBA,'F') .OR. LSAME(JOBA,'G') ) 
             then the length of IWORK is N+M; otherwise the length of IWORK is N. 
          4. If the singular values with both the left and the right singular vectors
             are requested, then:      
             4.1. If LSAME(JOBV,'J') the length of IWORK is determined as follows:
                  If ( LSAME(JOBT,'T') .OR. LSAME(JOBA,'F') .OR. LSAME(JOBA,'G') ) 
                  then the length of IWORK is N+M; otherwise the length of IWORK is N. 
             4.2. If LSAME(JOBV,'V') the length of IWORK is determined as follows:
                  If ( LSAME(JOBT,'T') .OR. LSAME(JOBA,'F') .OR. LSAME(JOBA,'G') ) 
                  then the length of IWORK is 2*N+M; otherwise the length of IWORK is 2*N.
          On exit,
          IWORK(1) = the numerical rank determined after the initial
                     QR factorization with pivoting. See the descriptions
                     of JOBA and JOBR.
          IWORK(2) = the number of the computed nonzero singular values
          IWORK(3) = if nonzero, a warning message:
                     If IWORK(3) = 1 then some of the column norms of A
                     were denormalized floats. The requested high accuracy
                     is not warranted by the data.
          IWORK(4) = 1 or -1. If IWORK(4) = 1, then the procedure used A^* to
                     do the job as specified by the JOB parameters.
          If the call to ZGEJSV is a workspace query (indicated by LWORK = -1 or
          LRWORK = -1), then on exit IWORK(1) contains the required length of 
          IWORK for the job parameters used in the call.

INFO

          INFO is INTEGER
           < 0:  if INFO = -i, then the i-th argument had an illegal value.
           = 0:  successful exit;
           > 0:  ZGEJSV  did not converge in the maximal allowed number
                 of sweeps. The computed values may be inaccurate.

Author

Univ. of Tennessee

Univ. of California Berkeley

Univ. of Colorado Denver

NAG Ltd.

Further Details:

  ZGEJSV implements a preconditioned Jacobi SVD algorithm. It uses ZGEQP3,
  ZGEQRF, and ZGELQF as preprocessors and preconditioners. Optionally, an
  additional row pivoting can be used as a preprocessor, which in some
  cases results in much higher accuracy. An example is matrix A with the
  structure A = D1 * C * D2, where D1, D2 are arbitrarily ill-conditioned
  diagonal matrices and C is well-conditioned matrix. In that case, complete
  pivoting in the first QR factorizations provides accuracy dependent on the
  condition number of C, and independent of D1, D2. Such higher accuracy is
  not completely understood theoretically, but it works well in practice.
  Further, if A can be written as A = B*D, with well-conditioned B and some
  diagonal D, then the high accuracy is guaranteed, both theoretically and
  in software, independent of D. For more details see [1], [2].
     The computational range for the singular values can be the full range
  ( UNDERFLOW,OVERFLOW ), provided that the machine arithmetic and the BLAS
  & LAPACK routines called by ZGEJSV are implemented to work in that range.
  If that is not the case, then the restriction for safe computation with
  the singular values in the range of normalized IEEE numbers is that the
  spectral condition number kappa(A)=sigma_max(A)/sigma_min(A) does not
  overflow. This code (ZGEJSV) is best used in this restricted range,
  meaning that singular values of magnitude below ||A||_2 / DLAMCH('O') are
  returned as zeros. See JOBR for details on this.
     Further, this implementation is somewhat slower than the one described
  in [1,2] due to replacement of some non-LAPACK components, and because
  the choice of some tuning parameters in the iterative part (ZGESVJ) is
  left to the implementer on a particular machine.
     The rank revealing QR factorization (in this code: ZGEQP3) should be
  implemented as in [3]. We have a new version of ZGEQP3 under development
  that is more robust than the current one in LAPACK, with a cleaner cut in
  rank deficient cases. It will be available in the SIGMA library [4].
  If M is much larger than N, it is obvious that the initial QRF with
  column pivoting can be preprocessed by the QRF without pivoting. That
  well known trick is not used in ZGEJSV because in some cases heavy row
  weighting can be treated with complete pivoting. The overhead in cases
  M much larger than N is then only due to pivoting, but the benefits in
  terms of accuracy have prevailed. The implementer/user can incorporate
  this extra QRF step easily. The implementer can also improve data movement
  (matrix transpose, matrix copy, matrix transposed copy) - this
  implementation of ZGEJSV uses only the simplest, naive data movement.

Contributor:

Zlatko Drmac, Department of Mathematics, Faculty of Science, University of Zagreb (Zagreb, Croatia); drmac@math.hr

References:

 [1] Z. Drmac and K. Veselic: New fast and accurate Jacobi SVD algorithm I.
     SIAM J. Matrix Anal. Appl. Vol. 35, No. 2 (2008), pp. 1322-1342.
     LAPACK Working note 169.
 [2] Z. Drmac and K. Veselic: New fast and accurate Jacobi SVD algorithm II.
     SIAM J. Matrix Anal. Appl. Vol. 35, No. 2 (2008), pp. 1343-1362.
     LAPACK Working note 170.
 [3] Z. Drmac and Z. Bujanovic: On the failure of rank-revealing QR
     factorization software - a case study.
     ACM Trans. Math. Softw. Vol. 35, No 2 (2008), pp. 1-28.
     LAPACK Working note 176.
 [4] Z. Drmac: SIGMA - mathematical software library for accurate SVD, PSV,
     QSVD, (H,K)-SVD computations.
     Department of Mathematics, University of Zagreb, 2008, 2016.

Bugs, examples and comments:

Please report all bugs and send interesting examples and/or comments to drmac@math.hr. Thank you.

Definition at line 566 of file zgejsv.f.

Generated automatically by Doxygen for LAPACK from the source code.

Version 3.12.0 LAPACK