.TH VGSCAN 8 "LVM TOOLS 2.03.27(2) (2024-10-02)" "Red Hat, Inc." . .SH NAME . vgscan \(em Search for all volume groups . .SH SYNOPSIS . \fBvgscan\fP .br [ \fIoption_args\fP ] .br . .SH DESCRIPTION . vgscan scans all supported LVM block devices in the system for VGs. . .SH USAGE . \fBvgscan\fP .br .RS 4 .ad l [ \fB\-\-ignorelockingfailure\fP ] .br [ \fB\-\-mknodes\fP ] .br [ \fB\-\-notifydbus\fP ] .br [ \fB\-\-refresh\fP ] .br [ \fB\-\-reportformat\fP \fBbasic\fP|\fBjson\fP|\fBjson_std\fP ] .br [ COMMON_OPTIONS ] .ad b .RE .P Common options for lvm: . .RS 4 .ad l [ \fB\-d\fP|\fB\-\-debug\fP ] .br [ \fB\-h\fP|\fB\-\-help\fP ] .br [ \fB\-q\fP|\fB\-\-quiet\fP ] .br [ \fB\-t\fP|\fB\-\-test\fP ] .br [ \fB\-v\fP|\fB\-\-verbose\fP ] .br [ \fB\-y\fP|\fB\-\-yes\fP ] .br [ \fB\-\-commandprofile\fP \fIString\fP ] .br [ \fB\-\-config\fP \fIString\fP ] .br [ \fB\-\-devices\fP \fIPV\fP ] .br [ \fB\-\-devicesfile\fP \fIString\fP ] .br [ \fB\-\-driverloaded\fP \fBy\fP|\fBn\fP ] .br [ \fB\-\-journal\fP \fIString\fP ] .br [ \fB\-\-lockopt\fP \fIString\fP ] .br [ \fB\-\-longhelp\fP ] .br [ \fB\-\-nohints\fP ] .br [ \fB\-\-nolocking\fP ] .br [ \fB\-\-profile\fP \fIString\fP ] .br [ \fB\-\-version\fP ] .ad b .RE . .SH OPTIONS . . .HP \fB\-\-commandprofile\fP \fIString\fP .br The command profile to use for command configuration. See \fBlvm.conf\fP(5) for more information about profiles. . .HP \fB\-\-config\fP \fIString\fP .br Config settings for the command. These override \fBlvm.conf\fP(5) settings. The String arg uses the same format as \fBlvm.conf\fP(5), or may use section/field syntax. See \fBlvm.conf\fP(5) for more information about config. . .HP \fB\-d\fP|\fB\-\-debug\fP ... .br Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). . .HP \fB\-\-devices\fP \fIPV\fP .br Restricts the devices that are visible and accessible to the command. Devices not listed will appear to be missing. This option can be repeated, or accepts a comma separated list of devices. This overrides the devices file. . .HP \fB\-\-devicesfile\fP \fIString\fP .br A file listing devices that LVM should use. The file must exist in \fI/etc/lvm/devices/\fP and is managed with the \fBlvmdevices\fP(8) command. This overrides the \fBlvm.conf\fP(5) \fBdevices/devicesfile\fP and \fBdevices/use_devicesfile\fP settings. . .HP \fB\-\-driverloaded\fP \fBy\fP|\fBn\fP .br If set to no, the command will not attempt to use device-mapper. For testing and debugging. . .HP \fB\-h\fP|\fB\-\-help\fP .br Display help text. . .HP \fB\-\-ignorelockingfailure\fP .br Allows a command to continue with read-only metadata operations after locking failures. . .HP \fB\-\-journal\fP \fIString\fP .br Record information in the systemd journal. This information is in addition to information enabled by the lvm.conf log/journal setting. command: record information about the command. output: record the default command output. debug: record full command debugging. . .HP \fB\-\-lockopt\fP \fIString\fP .br Used to pass options for special cases to lvmlockd. See \fBlvmlockd\fP(8) for more information. . .HP \fB\-\-longhelp\fP .br Display long help text. . .HP \fB\-\-mknodes\fP .br Also checks the LVM special files in /dev that are needed for active LVs and creates any missing ones and removes unused ones. See also additional \-\-refresh option for use in udev environment. . .HP \fB\-\-nohints\fP .br Do not use the hints file to locate devices for PVs. A command may read more devices to find PVs when hints are not used. The command will still perform standard hint file invalidation where appropriate. . .HP \fB\-\-nolocking\fP .br Disable locking. Use with caution, concurrent commands may produce incorrect results. . .HP \fB\-\-notifydbus\fP .br Send a notification to D-Bus. The command will exit with an error if LVM is not built with support for D-Bus notification, or if the notify_dbus config setting is disabled. . .HP \fB\-\-profile\fP \fIString\fP .br An alias for \-\-commandprofile or \-\-metadataprofile, depending on the command. . .HP \fB\-q\fP|\fB\-\-quiet\fP ... .br Suppress output and log messages. Overrides \-\-debug and \-\-verbose. Repeat once to also suppress any prompts with answer 'no'. . .HP \fB\-\-refresh\fP .br If the LV is active, reload its metadata. In an environment where udev is used to manage the /dev content, usage of this option is highly recommended. This is because refresh also regenerates udev events for an LV based on which existing udev rules are applied to set the /dev content and permissions. Also, this operation may be useful if something has gone wrong, or if some form of manual LV sharing is being used. . .HP \fB\-\-reportformat\fP \fBbasic\fP|\fBjson\fP|\fBjson_std\fP .br Overrides current output format for reports which is defined globally by the report/output_format setting in \fBlvm.conf\fP(5). \fBbasic\fP is the original format with columns and rows. If there is more than one report per command, each report is prefixed with the report name for identification. \fBjson\fP produces report output in JSON format. \fBjson_std\fP produces report output in JSON format which is more compliant with JSON standard. See \fBlvmreport\fP(7) for more information. . .HP \fB\-t\fP|\fB\-\-test\fP .br Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on reading back metadata it believes has changed but hasn't. . .HP \fB\-v\fP|\fB\-\-verbose\fP ... .br Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr. . .HP \fB\-\-version\fP .br Display version information. . .HP \fB\-y\fP|\fB\-\-yes\fP .br Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see \-qq.) . .SH VARIABLES . .TP .I String See the option description for information about the string content. .TP .IR Size [UNIT] Size is an input number that accepts an optional unit. Input units are always treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit is specified by letter, followed by |UNIT. UNIT represents other possible input units: .BR b | B is bytes, .BR s | S is sectors of 512 bytes, .BR k | K is KiB, .BR m | M is MiB, .BR g | G is GiB, .BR t | T is TiB, .BR p | P is PiB, .BR e | E is EiB. (This should not be confused with the output control \-\-units, where capital letters mean multiple of 1000.) . .SH ENVIRONMENT VARIABLES . See \fBlvm\fP(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter. . .SH SEE ALSO . .nh .ad l .BR lvm (8), .BR lvm.conf (5), .BR lvmconfig (8), .BR lvmdevices (8), .P .BR pvchange (8), .BR pvck (8), .BR pvcreate (8), .BR pvdisplay (8), .BR pvmove (8), .BR pvremove (8), .BR pvresize (8), .BR pvs (8), .BR pvscan (8), .P .BR vgcfgbackup (8), .BR vgcfgrestore (8), .BR vgchange (8), .BR vgck (8), .BR vgcreate (8), .BR vgconvert (8), .BR vgdisplay (8), .BR vgexport (8), .BR vgextend (8), .BR vgimport (8), .BR vgimportclone (8), .BR vgimportdevices (8), .BR vgmerge (8), .BR vgmknodes (8), .BR vgreduce (8), .BR vgremove (8), .BR vgrename (8), .BR vgs (8), .BR vgscan (8), .BR vgsplit (8), .P .BR lvcreate (8), .BR lvchange (8), .BR lvconvert (8), .BR lvdisplay (8), .BR lvextend (8), .BR lvreduce (8), .BR lvremove (8), .BR lvrename (8), .BR lvresize (8), .BR lvs (8), .BR lvscan (8), .P .BR lvm\-fullreport (8), .BR lvm\-lvpoll (8), .BR blkdeactivate (8), .BR lvmdump (8), .P .BR dmeventd (8), .BR lvmpolld (8), .BR lvmlockd (8), .BR lvmlockctl (8), .BR cmirrord (8), .BR lvmdbusd (8), .BR fsadm (8), .P .BR lvmsystemid (7), .BR lvmreport (7), .BR lvmcache (7), .BR lvmraid (7), .BR lvmthin (7), .BR lvmvdo (7), .BR lvmautoactivation (7)