UHD_SIGGEN(1)                    User Commands                   UHD_SIGGEN(1)

NAME
       uhd_siggen - Signal Generator using UHD hardware

SYNOPSIS
       uhd_siggen: [options]

DESCRIPTION
       Command-line signal generator application.

OPTIONS
       -h, --help
              show this help message and exit

       -a ARGS, --args=ARGS
              UHD device address args , [default=]

       --spec=SPEC
              Subdevice of UHD device where appropriate

       -A ANTENNA, --antenna=ANTENNA
              select Rx Antenna where appropriate

       -s SAMP_RATE, --samp-rate=SAMP_RATE
              set sample rate (bandwidth) [default=1000000.0]

       -g GAIN, --gain=GAIN
              set gain in dB (default is midpoint)

       -f FREQ, --tx-freq=FREQ
              Set carrier frequency to FREQ [default=mid-point]

       -x WAVEFORM_FREQ, --waveform-freq=WAVEFORM_FREQ
              Set baseband waveform frequency to FREQ [default=0]

       -y WAVEFORM2_FREQ, --waveform2-freq=WAVEFORM2_FREQ
              Set 2nd waveform frequency to FREQ [default=none]

       --sine Generate a carrier modulated by a complex sine wave

       --const
              Generate a constant carrier

       --offset=OFFSET
              Set waveform phase offset to OFFSET [default=0]

       --gaussian
              Generate Gaussian random output

       --uniform
              Generate Uniform random output

       --2tone
              Generate Two Tone signal for IMD testing

       --sweep
              Generate a swept sine wave

       --amplitude=AMPL
              Set output amplitude to AMPL (0.0-1.0) [default=0.15]

       -v, --verbose
              Use verbose console output [default=False]

SEE ALSO
       uhd_siggen_gui(1)

uhd_siggen 3.10.10.0              2024-05-11                     UHD_SIGGEN(1)