TRIPPLITESU(8)                    NUT Manual                    TRIPPLITESU(8)

NAME
       tripplitesu - Driver for Tripp-Lite SmartOnline (SU) UPS equipment

NOTE
       This man page only documents the hardware-specific features of the
       tripplitesu driver. For information about the core driver, see
       nutupsdrv(8).

SUPPORTED HARDWARE
       This driver supports the Tripp Lite SmartOnline family (via the serial
       port).

EXTRA ARGUMENTS
       This driver supports the following optional settings in the
       ups.conf(5):

       lowbatt=num
           Set the low battery warning threshold in percent at which shutdown
           is initiated by upsmon(8). By default, the UPS may not report low
           battery until there are only a few seconds left. Common values are
           around 25--30.

AUTHOR
       Allan N. Hessenflow <allanh@kallisti.com>

SEE ALSO
   The core driver:
       nutupsdrv(8)

   Other drivers for Tripp-Lite hardware:
       tripplite(8), tripplite_usb(8), usbhid-ups(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

Network UPS Tools 2.8.1           04/06/2024                    TRIPPLITESU(8)