TRIPPLITE(8)                      NUT Manual                      TRIPPLITE(8)

NAME
       tripplite - Driver for Tripp-Lite SmartPro UPS equipment

SYNOPSIS
       tripplite -h

       tripplite -a UPS_NAME [OPTIONS]

           Note

           This man page only documents the hardware-specific features of the
           tripplite driver. For information about the core driver, see
           nutupsdrv(8).

SUPPORTED HARDWARE
       This driver should work on the SmartPro line, including the SMART700
       and SMART700SER. It only supports SmartPro models that communicate
       using the serial port.

EXTRA ARGUMENTS
       This driver supports the following optional settings in the
       ups.conf(5):

       offdelay=num
           Time to wait before the UPS is turned off after the kill power
           command is sent. The default value is 64 (in seconds).

       rebootdelay=num
           Set the timer before the UPS is cycled after the reboot command is
           sent. The default value is 64 (in seconds).

       startdelay=num
           Set the time that the UPS waits before it turns itself back on
           after a reboot command. The default value is 60 (in seconds).

KNOWN ISSUES AND BUGS
       Battery charge information may not be correct for all UPSes. It is
       tuned to be correct for a SMART700SER. Other models may not provide
       correct information. Information from the manufacturer would be
       helpful.

AUTHORS
       o   Rickard E. (Rik) Faith

       o   Nicholas Kain

SEE ALSO
   The core driver:
       nutupsdrv(8)

   Other drivers for Tripp-Lite hardware:
       tripplitesu(8), tripplite_usb(8), usbhid-ups(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

Network UPS Tools 2.8.2           05/20/2024                      TRIPPLITE(8)