TGT-SETUP-LUN(8)                [FIXME: manual]               TGT-SETUP-LUN(8)

NAME
       tgt-setup-lun - Helper script that creates a target, adds a device to
       the target, and defines initiators that can connect to the target

SYNOPSIS
       tgt-setup-lun -d <device> -n <targetname> [-b <bsname>]
                     [-t <transport>] [-C <control_port>] [initiator_IP...]
                     [-h]

DESCRIPTION
       Creates a target according to the supplied target_name. tgtd must be
       running. The format of the default IQN generated from the target name
       is: "iqn.2001-04.com.<hostname>-<target_name>", or a complete IQN may
       be given. The target name must be unique.

       The script then adds the requested device to the target. If specific IP
       addresses are defined, it adds them to the list of allowed initiators
       for that target. If no IP addresses is defined, it defines that the
       target accepts any initiator.

EXAMPLES
       Create a target that uses /dev/sdb1 and allows connections only from
       192.168.10.81:

                 tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81


       Create a target that uses /dev/sdb1 and allows connections only from
       192.168.10.81 and 192.168.10.82:

                 tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82


       Create a target that uses /dev/sdb1 and allows connections from any
       initiator:

                 tgt-setup-lun -d /dev/sdb1 -n my_target


       Display help:

                 tgt-setup-lun -h


AUTHOR
       Written by Erez Zilber

SEE ALSO
       targets.conf(5), tgtd(8), tgtadm(8), tgtimg(8), tgt-admin(8).
       https://github.com/fujita/tgt

REPORTING BUGS
       Report bugs to <stgt@vger.kernel.org>

COPYRIGHT
       Copyright i?1/2 Voltaire Ltd. 2008.

[FIXME: source]                   09/05/2024                  TGT-SETUP-LUN(8)