tcpflow(1) tcpflow 1.6.1 tcpflow(1)
NAME
tcpflow - TCP flow recorder
SYNOPSIS
tcpflow [-aBcCDIpsZ] [-b max_bytes] [-d debug_level] [-[eE] scanner]
[-f max_fds] [-F[ctTXMkmg]] [-h|--help] [-i iface]
[-l file1.pcap file2.pcap...] [-L semlock] [-m min_bytes] [-o outdir]
[-r file1.pcap] [-R file0.pcap] [-S name=value] [-T[filename template]]
[-U|--relinquish-privileges username] [-v|--verbose] [-V|--version]
[-w file] [-x scanner] [-X file.xml] [-z|--chroot directory]
[expression]
DESCRIPTION
tcpflow is a program that captures data transmitted as part of TCP
connections (flows), and stores the data in a way that is convenient
for protocol analysis or debugging. Rather than showing packet-by-
packet information, tcpflow reconstructs the actual data streams and
stores each flow in a separate file for later analysis. tcpflow
understands TCP sequence numbers and will correctly reconstruct data
streams regardless of retransmissions or out-of-order delivery. tcpflow
provides control over filenames for automatic binning of connections by
protocol, IP address or connection number, and has a sophisticated
plug-in system for decompressing compressed HTTP connections, undoing
MIME encoding, or calling user-provided programs for post-processing.
By default tcpflow stores all captured data in files that have names of
the form:
192.168.101.102.02345-010.011.012.013.45103
...where the contents of the above file would be data transmitted from
host 192.168.101.102 port 2345, to host 10.11.12.13 port 45103.
If you want to simply process a few hundred thousand packets and see
what you have, try this:
tcpflow -a -o outdir -Fk -r packets.pcap
This will cause tcpflow to perform (-a) all processing, store the
output in a directory called outdir, bin the output in directories of
1000 connections each, and read its input from the file packets.pcap.
More sophisticated processing is possible, of course.
OPTIONS
-a Enable all processing. Same as -e all.
-B Force binary output even when printing to console with -C or -c.
-b max_bytes
Specifies the maximum size of a captured flow. Any bytes beyond
max_bytes from the first byte captured will be discarded. The
default is to store an unlimited number of bytes per flow. Note:
before version 1.4, tcpflow could only store a maximum of 4GiB
per flow.
-c Console print. Print the contents of packets to stdout as they
are received, without storing any captured data to files
(implies -s).
-C Console print without the packet source and destination details
being printed. Print the contents of packets to stdout as they
are received, without storing any captured data to files
(implies -s).
-D Console output should be in hex.
-d Debug level. Set the level of debugging messages printed to
stderr to debug_level. Higher numbers produce more messages.
-d 0 causes completely silent operation. -d 1 , the default,
produces minimal status messages. -d 10 produces verbose output
equivalent to -v . Numbers higher than 10 can produce a large
amount of debugging information useful only to developers.
-E name
Disable all scanners and then enable scanner name
-e name
Enable scanner name.
-e all Enables all scanners. Same as -a
-e http
Perform HTTP post-processing ("After" processing). If the output
file is
208.111.153.175.00080-192.168.001.064.37314,
Then the post-processing will create the files:
208.111.153.175.00080-192.168.001.064.37314-HTTP
208.111.153.175.00080-192.168.001.064.37314-HTTPBODY
If the HTTPBODY was compressed with GZIP, you may get a third
file as well:
208.111.153.175.00080-192.168.001.064.37314-HTTPBODY-GZIP
Additional information about these streams, such as their MD5
hash value, is also written to the DFXML report file.
-e python -S py_path=path -S py_module=module -S py_function=foo
Post-process TCP payload by an external python function.
The python function must take a single string parameter. The
python function can return a string (else the function does must
not return). The returned string (if any) is written in the
DFXML report file inside the XML tag
.... A sample python
script is available within the tcpflow source code in directory
python/plugins.
Example:
tcpflow -r my.cap -e python -S py_path=python/plugins -S py_module=samplePlugin -S py_function=sampleFunction
-F[format]
Specifies format for output filenames.
Format specifiers:
c Appends the connection counter to ALL filenames.
t Prepends each filename with a Unix timestamp (seconds
since epoch).
T Prepends each filename with an ISO-8601 timestamp.
X Do not output any files (other than the DFXML report
file).
-FM Include MD5 of each flow in the DFXML report file.
-FX Suppresses file output entirely, DFXML report file is still
produced.
-Fk bin output in 1K directories
-Fm bin output in 1M directories (2 levels)
-Fg bin output in 1G directories (3 levels)
-fmax_fds
Max file descriptors used. Limit the number of file descriptors
used by tcpflow to max_fds. Higher numbers use more system
resources, but usually perform better. If the underlying
operating system supports the setrlimit() system call, the OS
will be asked to enforce the requested limit. The default is
for tcpflow to use the maximum number of file descriptors
allowed by the OS. The -v option will report how many file
descriptors tcpflow is using.
-g Output flow information to console in multiple colors. (Blue for
client to server flows, red for server to client flows, green
for undecided flows.) Note: This option was different from
tcpflow 1.3 (-e) and 1.4.4 (-J).
-h --help
Help. Print usage information and exit.
-hh More help. Print more usage information and exit.
-i iface
Interface name. Capture packets from the network interface
named iface. If no interface is specified with -i , a
reasonable default will be used by libpcap automatically.
-I Store the reception timestamps (of TCP packets) in a companion
file *.findx. Therefore each flow will have two files: (1) the
usual file containing payload bytes and (2) the text file
containing the corresponding timestamps. This last file *.findx
has three columns using the pipe '|' as separator:
byte-index|timestamp|length
The byte-index column is the postion within the file containing
the payload bytes. The timestamp column represents the number
of seconds since epoch as a floating point number. The
precision is the microsecond but may also be the nanosecond in a
future tcpflow version. The length column is the number of
successive bytes concerned by timestamp and can include several
TCP frames (TCP packets). The extension findx may become from
the fact that the timestamps are frame indexed.
-L semlock_name
Specifies that semlock_name should be used as a Unix semaphore
to prevent two different copies of tcpflow running in two
different processes but outputting to the same standard output
from printing on top of each other. This is an application of
Unix named semaphores; bet you have never seen one before.
-l Treat the following arguments as filenames with an assumed -r
command before each one. This allows you to read a lot of files
at once with shell globbing. For example, to process all of the
pcap files in the current directory, use this:
tcpflow -o out -a -l *.pcap
-m min_size
Forces a new connection output file when there is a skip in the
TCP session of min_size bytes or more.
-o outdir
Specifies the output directory where the transcript files will
be written.
-P No purge. Normally tcpflow removes connections from the hash
table after the connection is closed with a FIN. This conserves
memory but takes additional CPU time. Selecting this option
causes the std::tr1:unordered_map to grow without bounds, as
tcpflow did prior to version 1.1. That makes tcpflow run faster
if there are less than 10 million connections, but can lead to
out-of-memory errors.
-p No promiscuous mode. Normally, tcpflow attempts to put the
network interface into promiscuous mode before capturing
packets. The -p option tells tcpflow not to put the interface
into promiscuous mode. Note that it might already be in
promiscuous mode for some other reason.
-q Quiet mode --- don't print warnings. Currently the only warning
that tcpflow prints is a warning when more than 10,000 files are
created that the user should have provided the -Fk, -Fm, or -Fg
options. We might have other warnings in the future.
--relinquish-privileges=username
When tcpflow is run as root, this option changes the user ID and
group ID to write files owned by username. The group ID is the
first one from the username groups list. This operation is
performed just after opening the capture device or just after
opening the first input PCAP file. This option does not support
multi root-only readable input files as the root privileges are
dropped after opening the first file (e.g. -r
root-only-access.pcap -R root-only.pcap -l root-only*.pcap).
This option has the same behaviour as the tcpdump(1) option
having the same name --relinquish-privileges
-r Read from file. Read packets from file, which was created using
the -w option of tcpdump(1). This option may be repeated any
number of times. Standard input is used if file is "-". Note
that for this option to be useful, tcpdump's -s option should be
used to set the snaplen to the MTU of the interface (e.g., 1500)
while capturing packets.
-R Read from a file, but only to complete TCP flows. This option is
used when tcpflow is used to process a series of files that are
captured over time. For each time period n, file file(n).pcap
should be processed with -R file(n).pcap, while file(n-1).pcap
should be processed with -r file(n-1).pcap.
-Sname=value
Sets a name parameter to be equal to value for a plug-in. Use
-hh to find out all of the settable parameters.
-s Strip non-printables. Convert all non-printable characters to
the "." character before printing packets to the console or
storing them to a file.
-T[format]
Specifies an arbitrary template for filenames.
%A expands to source IP address.
%a expands to source IP port.
%B expands to destination IP address.
%b expands to destination IP port.
%T expands to timestamp in ISO8601 format.
%t expands to timestamp in Unix time_t format.
%V expands to "--" if a VLAN is present.
%v expands to the VLAN number if a VLAN is present.
%C expands to "c" if the connection count>0.
%c expands to the connection count if the connection
count>0.
%# always expands to the connection count.
%N (connection_number ) % 1000
%K (connection_number / 1000) % 1000
%M (connection_number / 1000000) % 1000
%G (connection_number / 1000000000) % 1000
%% prints a "%".
When the option -T is used, tcpflow ignores options -Fk, -Fm and -Fg.
However, the option -T handles '/' within the filename template patern
to create sub-directories. For example the following line will create
a directory tree out/IP-src/port-src/IP-dst/port-dst.
tcpflow -r packets.pcap -o out -T %A/%a/%B/%b/%c%N.flow
-V --version
Print the version number and exit.
-v --verbose
Verbose operation. Verbosely describe tcpflow's operation.
Equivalent to -d 10.
-w filename.pcap
Write packets that were not processed to filename.pcap.
Typically this will be UDP packets.
-X filename.xml
Write a DFXML report to filename.xml. The file contains a record
of every tcp connection, how the tcpflow program was compiled,
and the computer on which tcpflow was run. By default tcpflow
writes the DFXML report in file report.xml.
-Z Don't decompress gzip-compressed streams. -K Retain per flow
isolated pcap structure.
expression
selects which packets will be captured. If no expression is
given, all packets on the net will be captured. Otherwise, only
packets for which expression is `true' will be captured.
For the expression syntax, see pcap-filter(7).
The expression argument can be passed to tcpflow as either a
single Shell argument, or as multiple Shell arguments, whichever
is more convenient. Generally, if the expression contains Shell
metacharacters, such as backslashes used to escape protocol
names, it is easier to pass it as a single, quoted argument
rather than to escape the Shell metacharacters. Multiple
arguments are concatenated with spaces before being parsed.
DFXML report
The DFXML report is the XML file written by tcpflow to provide tcpflow
build details, command line arguments and information about processed
flows.
By default the DFXML file is named report.xml. But this filename can
be changed using command line option -X.
DFXML file respects the DFXML schema defined by project
https://github.com/dfxml-working-group/dfxml_schema.
Moreover tcpflow adds two extra XML tags, as illustrated by the
following example:
bla bla bla
The first XML tag provide information about the captured
flow. This tag should be renamed in a future version in
order to conform better to DFXML schema.
The second XML tag collects processing results. For
the moment, only the scanner python uses this feature.
The XML attributes of are:
o startime Reception time of first packet
o endtime Reception time of last packet
o family
o mac_daddr Destination MAC address of first packet (printed if
any)
o mac_saddr Source MAC address of first packet (printed if any)
o src_ipn IP source
o dst_ipn IP destination
o srcport TCP port source
o dstport TCP port destination
o packets Nummber of packets
o out_of_order_count Number of times tcpflow has replaced missing
payload by zeros in the flow file, for example when capture does
not contain the TCP session begin (printed if any)
o violations Number of protocol violations (printed if any)
o len Sum of un-truncated length of all packet data (including
headers, see https://stackoverflow.com/q/1491660)
o caplen Sum of captured bytes of all packet data (including
headers, printed if different from len)
The XML attributes of are:
o scanner Name of the scanner
o path Directory of the scanner module (printed if relevant)
o module Module name (printed if relevant, used to indicate the
python script)
o function Function name (printed if relevant, used to indicate
the function within the python module)
EXAMPLES
To record all packets arriving at or departing from sundown and extract
all of the HTTP attachments:
tcpflow -e http -o outdir host sundown
To record traffic between helios and either hot or ace and bin the
results into 1000 files per directory and calculate the MD5 of each
flow:
tcpflow -X report.xml -e md5 -o outdir -Fk host helios and \( hot or ace \)
BUGS
Please send bug reports to simsong@acm.org.
tcpflow currently does not understand IP fragments. Flows containing
IP fragments will not be recorded correctly.
AUTHORS
Originally by Jeremy Elson . Substantially
modified and maintained by Simson L. Garfinkel .
Network visualization code by Michael Shick
The current version of this software is available at
http://digitalcorpora.org/downloads/tcpflow/
An announcement mailing list for this program is at:
http://groups.google.com/group/tcpflow-users
SEE ALSO
tcpdump(1), nit(4P), bpf(4), pcap(3), pcap-savefile(5), pcap-filter(7)
tcpflow 1.6.1 2013-04-13 tcpflow(1)