'\" et .TH SYSTEM "3P" 2017 "IEEE/The Open Group" "POSIX Programmer's Manual" .\" .SH PROLOG This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux. .\" .SH NAME system \(em issue a command .SH SYNOPSIS .LP .nf #include .P int system(const char *\fIcommand\fP); .fi .SH DESCRIPTION The functionality described on this reference page is aligned with the ISO\ C standard. Any conflict between the requirements described here and the ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard. .P If .IR command is a null pointer, the \fIsystem\fR() function shall determine whether the host environment has a command processor. If .IR command is not a null pointer, the \fIsystem\fR() function shall pass the string pointed to by .IR command to that command processor to be executed in an implementation-defined manner; this might then cause the program calling \fIsystem\fR() to behave in a non-conforming manner or to terminate. .P The \fIsystem\fR() function shall behave as if a child process were created using \fIfork\fR(), and the child process invoked the .IR sh utility using \fIexecl\fR() as follows: .sp .RS 4 .nf execl(<\fIshell path\fP>, "sh", "-c", \fIcommand\fP, (char *)0); .fi .P .RE .P where <\fIshell path\fP> is an unspecified pathname for the .IR sh utility. It is unspecified whether the handlers registered with \fIpthread_atfork\fR() are called as part of the creation of the child process. .P The \fIsystem\fR() function shall ignore the SIGINT and SIGQUIT signals, and shall block the SIGCHLD signal, while waiting for the command to terminate. If this might cause the application to miss a signal that would have killed it, then the application should examine the return value from \fIsystem\fR() and take whatever action is appropriate to the application if the command terminated due to receipt of a signal. .P The \fIsystem\fR() function shall not affect the termination status of any child of the calling processes other than the process or processes it itself creates. .P The \fIsystem\fR() function shall not return until the child process has terminated. .P The \fIsystem\fR() function need not be thread-safe. .SH "RETURN VALUE" If .IR command is a null pointer, \fIsystem\fR() shall return non-zero to indicate that a command processor is available, or zero if none is available. The \fIsystem\fR() function shall always return non-zero when .IR command is NULL. .P If .IR command is not a null pointer, \fIsystem\fR() shall return the termination status of the command language interpreter in the format specified by \fIwaitpid\fR(). The termination status shall be as defined for the .IR sh utility; otherwise, the termination status is unspecified. If some error prevents the command language interpreter from executing after the child process is created, the return value from \fIsystem\fR() shall be as if the command language interpreter had terminated using .IR exit (127) or .IR _exit (127). If a child process cannot be created, or if the termination status for the command language interpreter cannot be obtained, \fIsystem\fR() shall return \-1 and set .IR errno to indicate the error. .SH ERRORS The \fIsystem\fR() function may set .IR errno values as described by .IR "\fIfork\fR\^(\|)". .br .P In addition, \fIsystem\fR() may fail if: .TP .BR ECHILD The status of the child process created by \fIsystem\fR() is no longer available. .LP .IR "The following sections are informative." .SH EXAMPLES None. .SH "APPLICATION USAGE" If the return value of \fIsystem\fR() is not \-1, its value can be decoded through the use of the macros described in .IR . For convenience, these macros are also provided in .IR . .P Note that, while \fIsystem\fR() must ignore SIGINT and SIGQUIT and block SIGCHLD while waiting for the child to terminate, the handling of signals in the executed command is as specified by \fIfork\fR() and .IR exec . For example, if SIGINT is being caught or is set to SIG_DFL when \fIsystem\fR() is called, then the child is started with SIGINT handling set to SIG_DFL. .P Ignoring SIGINT and SIGQUIT in the parent process prevents coordination problems (two processes reading from the same terminal, for example) when the executed command ignores or catches one of the signals. It is also usually the correct action when the user has given a command to the application to be executed synchronously (as in the .BR '!' command in many interactive applications). In either case, the signal should be delivered only to the child process, not to the application itself. There is one situation where ignoring the signals might have less than the desired effect. This is when the application uses \fIsystem\fR() to perform some task invisible to the user. If the user typed the interrupt character (\c .BR \(dq\(haC\(dq , for example) while \fIsystem\fR() is being used in this way, one would expect the application to be killed, but only the executed command is killed. Applications that use \fIsystem\fR() in this way should carefully check the return status from \fIsystem\fR() to see if the executed command was successful, and should take appropriate action when the command fails. .P Blocking SIGCHLD while waiting for the child to terminate prevents the application from catching the signal and obtaining status from \fIsystem\fR()'s child process before \fIsystem\fR() can get the status itself. .P The context in which the utility is ultimately executed may differ from that in which \fIsystem\fR() was called. For example, file descriptors that have the FD_CLOEXEC flag set are closed, and the process ID and parent process ID are different. Also, if the executed utility changes its environment variables or its current working directory, that change is not reflected in the caller's context. .P There is no defined way for an application to find the specific path for the shell. However, \fIconfstr\fR() can provide a value for .IR PATH that is guaranteed to find the .IR sh utility. .P Using the \fIsystem\fR() function in more than one thread in a process or when the SIGCHLD signal is being manipulated by more than one thread in a process may produce unexpected results. .SH RATIONALE The \fIsystem\fR() function should not be used by programs that have set user (or group) ID privileges. The \fIfork\fR() and .IR exec family of functions (except \fIexeclp\fR() and \fIexecvp\fR()), should be used instead. This prevents any unforeseen manipulation of the environment of the user that could cause execution of commands not anticipated by the calling program. .P There are three levels of specification for the \fIsystem\fR() function. The ISO\ C standard gives the most basic. It requires that the function exists, and defines a way for an application to query whether a command language interpreter exists. It says nothing about the command language or the environment in which the command is interpreted. .P POSIX.1\(hy2008 places additional restrictions on \fIsystem\fR(). It requires that if there is a command language interpreter, the environment must be as specified by \fIfork\fR() and .IR exec . This ensures, for example, that close-on-\c .IR exec works, that file locks are not inherited, and that the process ID is different. It also specifies the return value from \fIsystem\fR() when the command line can be run, thus giving the application some information about the command's completion status. .P Finally, POSIX.1\(hy2008 requires the command to be interpreted as in the shell command language defined in the Shell and Utilities volume of POSIX.1\(hy2017. .P Note that, .IR system (NULL) is required to return non-zero, indicating that there is a command language interpreter. At first glance, this would seem to conflict with the ISO\ C standard which allows .IR system (NULL) to return zero. There is no conflict, however. A system must have a command language interpreter, and is non-conforming if none is present. It is therefore permissible for the \fIsystem\fR() function on such a system to implement the behavior specified by the ISO\ C standard as long as it is understood that the implementation does not conform to POSIX.1\(hy2008 if .IR system (NULL) returns zero. .P It was explicitly decided that when .IR command is NULL, \fIsystem\fR() should not be required to check to make sure that the command language interpreter actually exists with the correct mode, that there are enough processes to execute it, and so on. The call .IR system (NULL) could, theoretically, check for such problems as too many existing child processes, and return zero. However, it would be inappropriate to return zero due to such a (presumably) transient condition. If some condition exists that is not under the control of this application and that would cause any \fIsystem\fR() call to fail, that system has been rendered non-conforming. .P Early drafts required, or allowed, \fIsystem\fR() to return with .IR errno set to .BR [EINTR] if it was interrupted with a signal. This error return was removed, and a requirement that \fIsystem\fR() not return until the child has terminated was added. This means that if a \fIwaitpid\fR() call in \fIsystem\fR() exits with .IR errno set to .BR [EINTR] , \fIsystem\fR() must reissue the \fIwaitpid\fR(). This change was made for two reasons: .IP " 1." 4 There is no way for an application to clean up if \fIsystem\fR() returns .BR [EINTR] , short of calling \fIwait\fR(), and that could have the undesirable effect of returning the status of children other than the one started by \fIsystem\fR(). .IP " 2." 4 While it might require a change in some historical implementations, those implementations already have to be changed because they use \fIwait\fR() instead of \fIwaitpid\fR(). .P Note that if the application is catching SIGCHLD signals, it will receive such a signal before a successful \fIsystem\fR() call returns. .P To conform to POSIX.1\(hy2008, \fIsystem\fR() must use \fIwaitpid\fR(), or some similar function, instead of \fIwait\fR(). .P The following code sample illustrates how \fIsystem\fR() might be implemented on an implementation conforming to POSIX.1\(hy2008. .sp .RS 4 .nf #include int system(const char *cmd) { int stat; pid_t pid; struct sigaction sa, savintr, savequit; sigset_t saveblock; if (cmd == NULL) return(1); sa.sa_handler = SIG_IGN; sigemptyset(&sa.sa_mask); sa.sa_flags = 0; sigemptyset(&savintr.sa_mask); sigemptyset(&savequit.sa_mask); sigaction(SIGINT, &sa, &savintr); sigaction(SIGQUIT, &sa, &savequit); sigaddset(&sa.sa_mask, SIGCHLD); sigprocmask(SIG_BLOCK, &sa.sa_mask, &saveblock); if ((pid = fork()) == 0) { sigaction(SIGINT, &savintr, (struct sigaction *)0); sigaction(SIGQUIT, &savequit, (struct sigaction *)0); sigprocmask(SIG_SETMASK, &saveblock, (sigset_t *)0); execl("/bin/sh", "sh", "-c", cmd, (char *)0); _exit(127); } if (pid == -1) { stat = -1; /* errno comes from fork() */ } else { while (waitpid(pid, &stat, 0) == -1) { if (errno != EINTR){ stat = -1; break; } } } sigaction(SIGINT, &savintr, (struct sigaction *)0); sigaction(SIGQUIT, &savequit, (struct sigaction *)0); sigprocmask(SIG_SETMASK, &saveblock, (sigset_t *)0); return(stat); } .fi .P .RE .P Note that, while a particular implementation of \fIsystem\fR() (such as the one above) can assume a particular path for the shell, such a path is not necessarily valid on another system. The above example is not portable, and is not intended to be. .P Note also that the above example implementation is not thread-safe. Implementations can provide a thread-safe \fIsystem\fR() function, but doing so involves complications such as how to restore the signal dispositions for SIGINT and SIGQUIT correctly if there are overlapping calls, and how to deal with cancellation. The example above would not restore the signal dispositions and would leak a process ID if cancelled. This does not matter for a non-thread-safe implementation since canceling a non-thread-safe function results in undefined behavior (see .IR "Section 2.9.5.2" ", " "Cancellation Points"). To avoid leaking a process ID, a thread-safe implementation would need to terminate the child process when acting on a cancellation. .P One reviewer suggested that an implementation of \fIsystem\fR() might want to use an environment variable such as .IR SHELL to determine which command interpreter to use. The supposed implementation would use the default command interpreter if the one specified by the environment variable was not available. This would allow a user, when using an application that prompts for command lines to be processed using \fIsystem\fR(), to specify a different command interpreter. Such an implementation is discouraged. If the alternate command interpreter did not follow the command line syntax specified in the Shell and Utilities volume of POSIX.1\(hy2017, then changing .IR SHELL would render \fIsystem\fR() non-conforming. This would affect applications that expected the specified behavior from \fIsystem\fR(), and since the Shell and Utilities volume of POSIX.1\(hy2017 does not mention that .IR SHELL affects \fIsystem\fR(), the application would not know that it needed to unset .IR SHELL . .SH "FUTURE DIRECTIONS" None. .SH "SEE ALSO" .IR "Section 2.9.5.2" ", " "Cancellation Points", .IR "\fIexec\fR\^", .IR "\fIpipe\fR\^(\|)", .IR "\fIpthread_atfork\fR\^(\|)", .IR "\fIwait\fR\^(\|)" .P The Base Definitions volume of POSIX.1\(hy2017, .IR "\fB\fP", .IR "\fB\fP", .IR "\fB\fP", .IR "\fB\fP" .P The Shell and Utilities volume of POSIX.1\(hy2017, .IR "\fIsh\fR\^" .\" .SH COPYRIGHT Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1-2017, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 7, 2018 Edition, Copyright (C) 2018 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html . .PP Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html .