SRC/strevc.f(3)            Library Functions Manual            SRC/strevc.f(3)

NAME
       SRC/strevc.f

SYNOPSIS
   Functions/Subroutines
       subroutine strevc (side, howmny, select, n, t, ldt, vl, ldvl, vr, ldvr,
           mm, m, work, info)
           STREVC

Function/Subroutine Documentation
   subroutine strevc (character side, character howmny, logical, dimension( *
       ) select, integer n, real, dimension( ldt, * ) t, integer ldt, real,
       dimension( ldvl, * ) vl, integer ldvl, real, dimension( ldvr, * ) vr,
       integer ldvr, integer mm, integer m, real, dimension( * ) work, integer
       info)
       STREVC

       Purpose:


            STREVC computes some or all of the right and/or left eigenvectors of
            a real upper quasi-triangular matrix T.
            Matrices of this type are produced by the Schur factorization of
            a real general matrix:  A = Q*T*Q**T, as computed by SHSEQR.

            The right eigenvector x and the left eigenvector y of T corresponding
            to an eigenvalue w are defined by:

               T*x = w*x,     (y**H)*T = w*(y**H)

            where y**H denotes the conjugate transpose of y.
            The eigenvalues are not input to this routine, but are read directly
            from the diagonal blocks of T.

            This routine returns the matrices X and/or Y of right and left
            eigenvectors of T, or the products Q*X and/or Q*Y, where Q is an
            input matrix.  If Q is the orthogonal factor that reduces a matrix
            A to Schur form T, then Q*X and Q*Y are the matrices of right and
            left eigenvectors of A.

       Parameters
           SIDE

                     SIDE is CHARACTER*1
                     = 'R':  compute right eigenvectors only;
                     = 'L':  compute left eigenvectors only;
                     = 'B':  compute both right and left eigenvectors.

           HOWMNY

                     HOWMNY is CHARACTER*1
                     = 'A':  compute all right and/or left eigenvectors;
                     = 'B':  compute all right and/or left eigenvectors,
                             backtransformed by the matrices in VR and/or VL;
                     = 'S':  compute selected right and/or left eigenvectors,
                             as indicated by the logical array SELECT.

           SELECT

                     SELECT is LOGICAL array, dimension (N)
                     If HOWMNY = 'S', SELECT specifies the eigenvectors to be
                     computed.
                     If w(j) is a real eigenvalue, the corresponding real
                     eigenvector is computed if SELECT(j) is .TRUE..
                     If w(j) and w(j+1) are the real and imaginary parts of a
                     complex eigenvalue, the corresponding complex eigenvector is
                     computed if either SELECT(j) or SELECT(j+1) is .TRUE., and
                     on exit SELECT(j) is set to .TRUE. and SELECT(j+1) is set to
                     .FALSE..
                     Not referenced if HOWMNY = 'A' or 'B'.

           N

                     N is INTEGER
                     The order of the matrix T. N >= 0.

           T

                     T is REAL array, dimension (LDT,N)
                     The upper quasi-triangular matrix T in Schur canonical form.

           LDT

                     LDT is INTEGER
                     The leading dimension of the array T. LDT >= max(1,N).

           VL

                     VL is REAL array, dimension (LDVL,MM)
                     On entry, if SIDE = 'L' or 'B' and HOWMNY = 'B', VL must
                     contain an N-by-N matrix Q (usually the orthogonal matrix Q
                     of Schur vectors returned by SHSEQR).
                     On exit, if SIDE = 'L' or 'B', VL contains:
                     if HOWMNY = 'A', the matrix Y of left eigenvectors of T;
                     if HOWMNY = 'B', the matrix Q*Y;
                     if HOWMNY = 'S', the left eigenvectors of T specified by
                                      SELECT, stored consecutively in the columns
                                      of VL, in the same order as their
                                      eigenvalues.
                     A complex eigenvector corresponding to a complex eigenvalue
                     is stored in two consecutive columns, the first holding the
                     real part, and the second the imaginary part.
                     Not referenced if SIDE = 'R'.

           LDVL

                     LDVL is INTEGER
                     The leading dimension of the array VL.  LDVL >= 1, and if
                     SIDE = 'L' or 'B', LDVL >= N.

           VR

                     VR is REAL array, dimension (LDVR,MM)
                     On entry, if SIDE = 'R' or 'B' and HOWMNY = 'B', VR must
                     contain an N-by-N matrix Q (usually the orthogonal matrix Q
                     of Schur vectors returned by SHSEQR).
                     On exit, if SIDE = 'R' or 'B', VR contains:
                     if HOWMNY = 'A', the matrix X of right eigenvectors of T;
                     if HOWMNY = 'B', the matrix Q*X;
                     if HOWMNY = 'S', the right eigenvectors of T specified by
                                      SELECT, stored consecutively in the columns
                                      of VR, in the same order as their
                                      eigenvalues.
                     A complex eigenvector corresponding to a complex eigenvalue
                     is stored in two consecutive columns, the first holding the
                     real part and the second the imaginary part.
                     Not referenced if SIDE = 'L'.

           LDVR

                     LDVR is INTEGER
                     The leading dimension of the array VR.  LDVR >= 1, and if
                     SIDE = 'R' or 'B', LDVR >= N.

           MM

                     MM is INTEGER
                     The number of columns in the arrays VL and/or VR. MM >= M.

           M

                     M is INTEGER
                     The number of columns in the arrays VL and/or VR actually
                     used to store the eigenvectors.
                     If HOWMNY = 'A' or 'B', M is set to N.
                     Each selected real eigenvector occupies one column and each
                     selected complex eigenvector occupies two columns.

           WORK

                     WORK is REAL array, dimension (3*N)

           INFO

                     INFO is INTEGER
                     = 0:  successful exit
                     < 0:  if INFO = -i, the i-th argument had an illegal value

       Author
           Univ. of Tennessee

           Univ. of California Berkeley

           Univ. of Colorado Denver

           NAG Ltd.

       Further Details:


             The algorithm used in this program is basically backward (forward)
             substitution, with scaling to make the the code robust against
             possible overflow.

             Each eigenvector is normalized so that the element of largest
             magnitude has magnitude 1; here the magnitude of a complex number
             (x,y) is taken to be |x| + |y|.

       Definition at line 220 of file strevc.f.

Author
       Generated automatically by Doxygen for LAPACK from the source code.

LAPACK                          Version 3.12.0                 SRC/strevc.f(3)