SMBIOS-BATTERY-CTL(1) User Commands SMBIOS-BATTERY-CTL(1) NAME smbios-battery-ctl - ../src/bin/smbios-battery-ctl SYNOPSIS smbios-battery-ctl OPTIONS --version show program's version number and exit -h, --help show this help message and exit -v, --verbose Display more verbose output. -q, --quiet Minimize program output. Only errors and warnings are displayed. --trace Enable verbose function tracing. --logconfig=LOGCONFIG Specify alternate config log. --security-key=SECURITY_KEY BIOS pre-calculated security key. --password=PASSWORD BIOS Setup password for set/activate operations. -r, --rawpassword Do not auto-convert password to scancodes. --memory-dat=MEMORY_DAT Path to a memory dump file to use instead of real RAM --cmos-dat=CMOS_DAT Path to a CMOS dump file to use instead of real CMOS -c, --battery-charge This will get the Current Battery Charging State --get-charging-cfg Get the current Primary Battery Charge Configuration --set-charging-mode= Set the current Primary Battery Charge Configuration. Valid choices are: ['primarily_ac', 'adaptive', 'custom', 'standard', 'express'] --set-custom-charge-interval= Set the percentage bounds for custom charge. Both must be integers. START must lie in the range [50, 95], END must lie in the range [55, 100], END must be at least (START + 5) SEE ALSO The full documentation for smbios-battery-ctl is maintained as a Texinfo manual. If the info and smbios-battery-ctl programs are properly installed at your site, the command info smbios-battery-ctl should give you access to the complete manual. smbios-battery-ctl 2.4.3 April 2024 SMBIOS-BATTERY-CTL(1)