.\" sd.4 .\" Copyright 1992 Rickard E. Faith (faith@cs.unc.edu) .\" .\" SPDX-License-Identifier: Linux-man-pages-copyleft .\" .TH sd 4 2024-05-02 "Linux man-pages 6.9.1" .SH NAME sd \- driver for SCSI disk drives .SH SYNOPSIS .nf .BR "#include " "/* for HDIO_GETGEO */" .BR "#include " "/* for BLKGETSIZE and BLKRRPART */" .fi .SH CONFIGURATION The block device name has the following form: .BI sd lp, where .I l is a letter denoting the physical drive, and .I p is a number denoting the partition on that physical drive. Often, the partition number, .IR p , will be left off when the device corresponds to the whole drive. .P SCSI disks have a major device number of 8, and a minor device number of the form (16 * .IR drive_number ") + " partition_number , where .I drive_number is the number of the physical drive in order of detection, and .I partition_number is as follows: .IP \[bu] 3 partition 0 is the whole drive .IP \[bu] partitions 1\[en]4 are the DOS "primary" partitions .IP \[bu] partitions 5\[en]8 are the DOS "extended" (or "logical") partitions .P For example, .I /dev/sda will have major 8, minor 0, and will refer to all of the first SCSI drive in the system; and .I /dev/sdb3 will have major 8, minor 19, and will refer to the third DOS "primary" partition on the second SCSI drive in the system. .P At this time, only block devices are provided. Raw devices have not yet been implemented. .SH DESCRIPTION The following .IR ioctl s are provided: .TP .B HDIO_GETGEO Returns the BIOS disk parameters in the following structure: .P .in +4n .EX struct hd_geometry { unsigned char heads; unsigned char sectors; unsigned short cylinders; unsigned long start; }; .EE .in .IP A pointer to this structure is passed as the .BR ioctl (2) parameter. .IP The information returned in the parameter is the disk geometry of the drive .I "as understood by DOS!" This geometry is .I not the physical geometry of the drive. It is used when constructing the drive's partition table, however, and is needed for convenient operation of .BR fdisk (1), .BR efdisk (1), and .BR lilo (1). If the geometry information is not available, zero will be returned for all of the parameters. .TP .B BLKGETSIZE Returns the device size in sectors. The .BR ioctl (2) parameter should be a pointer to a .IR long . .TP .B BLKRRPART Forces a reread of the SCSI disk partition tables. No parameter is needed. .IP The SCSI .BR ioctl (2) operations are also supported. If the .BR ioctl (2) parameter is required, and it is NULL, then .BR ioctl (2) fails with the error .BR EINVAL . .SH FILES .TP .I /dev/sd[a\-h] the whole device .TP .I /dev/sd[a\-h][0\-8] individual block partitions .\".SH SEE ALSO .\".BR scsi (4)