RGBASM(1) General Commands Manual RGBASM(1) NAME rgbasm - Game Boy assembler SYNOPSIS rgbasm [-EHhLlVvw] [-b chars] [-D name[=value]] [-g chars] [-I path] [-M depend_file] [-MG] [-MP] [-MT target_file] [-MQ target_file] [-o out_file] [-P include_file] [-p pad_value] [-Q fix_precision] [-r recursion_depth] [-W warning] [-X max_errors] asmfile DESCRIPTION The rgbasm program creates an RGB object file from an assembly source file. The object file format is documented in rgbds(5). The input asmfile can be a path to a file, or - to read from standard input. Note that options can be abbreviated as long as the abbreviation is unambiguous: --verb is --verbose, but --ver is invalid because it could also be --version. The arguments are as follows: -b chars, --binary-digits chars Change the two characters used for binary constants. The defaults are 01. -D name[=value], --define name[=value] Add a string symbol to the compiled source code. This is equivalent to `name EQUS "value"' in code, or `name EQUS "1"' if value is not specified. -E, --export-all Export all labels, including unreferenced and local labels. -g chars, --gfx-chars chars Change the four characters used for gfx constants. The defaults are 0123. -H, --nop-after-halt Inserts a nop instruction immediately after any halt instruction. This option is deprecated and will be removed in the next version. -h, --halt-without-nop This option is redundant and will be removed in the next version. -I path, --include path Add a new "include path"; path must point to a directory. When a INCLUDE (including the implicit one from -P) or INCBIN is attempted, rgbasm first looks up the provided path from its working directory; if this fails, it tries again from each of the "include path" directories, in the order they were provided. -L, --preserve-ld This option is redundant and will be removed in the next version. -l, --auto-ldh Optimize loads of the form LD [$FF00+n8],A into the opcode LDH [$FF00+n8],A. This option is deprecated and will be removed in the next version. -M depend_file, --dependfile depend_file Print make(1) dependencies to depend_file. -MG To be used in conjunction with -M. This makes rgbasm assume that missing files are auto-generated: when INCLUDE (including the implicit one from -P) or INCBIN is attempted on a non-existent file, it is added as a dependency, then rgbasm exits normally instead of erroring out. This feature is used in automatic updating of makefiles. -MP When enabled, this causes a phony target to be added for each dependency other than the main file. This prevents make(1) from erroring out when dependency files are deleted. -MT target_file Add a target to the rules emitted by -M. The exact string provided will be written, including spaces and special characters. -MT fileA -MT fileB is equivalent to -MT 'fileA fileB'. If neither this nor -MQ is specified, the output file name is used. -MQ target_file Same as -MT, but additionally escapes any special make(1) characters, essentially `$'. -o out_file, --output out_file Write an object file to the given filename. -P include_file, --preinclude include_file Pre-include a file. This acts as if a `INCLUDE "include_file"' was read before the input asmfile. -p pad_value, --pad-value pad_value Use this as the value for DS directives in ROM sections, unless overridden. The default is 0x00. -Q fix_precision, --q-precision fix_precision Use this as the precision of fixed-point numbers after the decimal point, unless they specify their own precision. The default is 16, so fixed-point numbers are Q16.16 (since they are 32-bit integers). The argument may start with a `.' to match the Q notation, for example, `-Q .16'. -r recursion_depth, --recursion-depth recursion_depth Specifies the recursion depth past which RGBASM will assume being in an infinite loop. The default is 64. -V, --version Print the version of the program and exit. -v, --verbose Be verbose. -W warning, --warning warning Set warning flag warning. A warning message will be printed if warning is an unknown warning flag. See the DIAGNOSTICS section for a list of warnings. -w Disable all warning output, even when turned into errors. -X max_errors, --max-errors max_errors If more than this number of errors (not warnings) occur, then abort the assembly process; -X -0 disables this behavior. The default is 100 if rgbasm is printing errors to a terminal, and 0 otherwise. DIAGNOSTICS Warnings are diagnostic messages that indicate possibly erroneous behavior that does not necessarily compromise the assembling process. The following options alter the way warnings are processed. -Werror Make all warnings into errors. -Werror= Make the specified warning into an error. A warning's name is appended (example: -Werror=obsolete), and this warning is implicitly enabled and turned into an error. This is an error if used with a meta warning, such as -Werror=all. The following warnings are "meta" warnings, that enable a collection of other warnings. If a specific warning is toggled via a meta flag and a specific one, the more specific one takes priority. The position on the command-line acts as a tie breaker, the last one taking effect. -Wall This enables warnings that are likely to indicate an error or undesired behavior, and that can easily be fixed. -Wextra This enables extra warnings that are less likely to pose a problem, but that may still be wanted. -Weverything Enables literally every warning. The following warnings are actual warning flags; with each description, the corresponding warning flag is included. Note that each of these flag also has a negation (for example, -Wcharmap-redef enables the warning that -Wno-charmap-redef disables). Only the non-default flag is listed here. Ignoring the "no-" prefix, entries are listed alphabetically. -Wno-assert Warn when WARN-type assertions fail. (See "Aborting the assembly process" in rgbasm(5) for ASSERT). -Wbackwards-for Warn when FOR loops have their start and stop values switched according to the step value. This warning is enabled by -Wall. -Wbuiltin-args Warn about incorrect arguments to built-in functions, such as STRSUB() with indexes outside of the string's bounds. This warning is enabled by -Wall. -Wcharmap-redef Warn when re-defining a charmap mapping. This warning is enabled by -Wall. -Wdiv Warn when dividing the smallest negative integer (-2**31) by -1, which yields itself due to integer overflow. -Wempty-macro-arg Warn when a macro argument is empty. This warning is enabled by -Wextra. -Wempty-strrpl Warn when STRRPL() is called with an empty string as its second argument (the substring to replace). This warning is enabled by -Wall. -Wlarge-constant Warn when a constant too large to fit in a signed 32-bit integer is encountered. This warning is enabled by -Wall. -Wlong-string Warn when a string too long to fit in internal buffers is encountered. This warning is enabled by -Wall. -Wmacro-shift Warn when shifting macro arguments past their limits. This warning is enabled by -Wextra. -Wno-obsolete Warn when obsolete constructs such as the _PI constant or PRINTT directive are encountered. -Wnumeric-string= Warn when a multi-character string is treated as a number. -Wnumeric-string=0 or -Wno-numeric-string disables this warning. -Wnumeric-string=1 or just -Wnumeric-string warns about strings longer than four characters, since four or fewer characters fit within a 32-bit integer. -Wnumeric-string=2 warns about any multi-character string. -Wshift Warn when shifting right a negative value. Use a division by 2**N instead. -Wshift-amount Warn when a shift's operand is negative or greater than 32. -Wtruncation= Warn when an implicit truncation (for example, db to an 8-bit value) loses some bits. -Wtruncation=0 or -Wno-truncation disables this warning. -Wtruncation=1 warns when an N-bit value is 2**N or greater, or less than -2**N. -Wtruncation=2 or just -Wtruncation also warns when an N-bit value is less than -2**(N-1), which will not fit in two's complement encoding. -Wunmapped-char= Warn when a character goes through charmap conversion but has no defined mapping. -Wunmapped-char=0 or -Wunmapped-char disables this warning. -Wunmapped-char=1 or just -Wunmapped-char only warns if the active charmap is not empty. -Wunmapped-char=2 warns if the active charmap is empty, and/or is not the default charmap `main'. -Wno-user Warn when the WARN built-in is executed. (See "Aborting the assembly process" in rgbasm(5) for WARN). EXAMPLES You can assemble a source file in two ways. Straightforward way: $ rgbasm -o bar.o foo.asm Pipes way: $ cat foo.asm | rgbasm -o bar.o - $ rgbasm -o bar.o - < foo.asm The resulting object file is not yet a usable ROM image--it must first be run through rgblink(1) and then rgbfix(1). BUGS Please report bugs on GitHub: https://github.com/gbdev/rgbds/issues. SEE ALSO rgbasm(5), rgblink(1), rgbfix(1), rgbgfx(1), gbz80(7), rgbds(5), rgbds(7) HISTORY rgbasm was originally written by Carsten Sorensen as part of the ASMotor package, and was later repackaged in RGBDS by Justin Lloyd. It is now maintained by a number of contributors at https://github.com/gbdev/rgbds. Linux 6.7.4-arch1-1 December 22, 2023 Linux 6.7.4-arch1-1