FROM A COMMAND SHELL

pstoedit [-v -help]

pstoedit The following options are available: [-include filename] [-df font name] [-nomaptoisolatin1] [-dis] [-pngimage filename] [-q] [-nq] [-nc] [-mergelines] [-filledrecttostroke] [-mergetext] [-dt] [-adt] [-ndt] [-dgbm] [-correctdefinefont] [-pti] [-pta] [-xscale number] [-yscale number] [-xshift number] [-yshift number] [-centered] [-minlinewidth number] [-pagenumberformat page number format specification] [-split] [-v] [-vl ] [-usebbfrominput] [-ssp] [-sfill] [-uchar character] [-nb] [-rdb] [-page page number] [-flat flatness factor] [-sclip] [-ups] [-rgb] [-useagl] [-noclip] [-t2fontsast1] [-keep] [-debugfonthandling] [-gstest] [-fakedateandversion] [-nfr] [-glyphs] [-useoldnormalization] [-rotate angle (0-360)] [-fontmap name of font map file for pstoedit] [-pagesize page format] [-help] [-bo] [-psarg argument string] [-pslanguagelevel PostScript Language Level 1, 2, or 3 to be used.] -f "format[:options]" [-gs either full path to the Ghostscript executable/DLL or - for Windows - just a version number (e.g. 10.01.0), in which case the version is used to look up the path from the registry.] [-gsregbase Ghostscript base registry path] [ inputfile [outputfile] ]

FROM PSTOEDITQTGUI

PstoeditQtGui provides an alternative to the command driven operation. The GUI provides access to almost all options and features that are supported by pstoedit. In addition it supports the conversion of multiple files in one job and also provides some shortcuts to some of Ghostscript's high level output devices.

The GUI is implemented using QT (https://www.qt.io).

The various options provided by pstoedit are displayed in different tabs in the GUI according to their category. A link to a more detailed description of each option into this manual is provided with each option in the GUI.

Side note: None of the options are "hard coded" into the GUI. Instead the meta information is retrieved from pstoedit itself. By this the GUI is always up to date with respect to the options and formats provided by pstoedit.

RELEASE LEVEL

This man-page documents release 4.01 of pstoedit.

USE

pstoedit converts PostScript and PDF files into various vector graphics formats. The resulting files can be edited or imported into various drawing packages. Type

pstoedit -help

for a list of supported output formats. Pstoedit comes with a large set of format drivers built into in the binary. Additional drivers can be installed as plugins and are available from http://www.pstoedit.net/plugins/. Simply copy the plugins into the same directory where the pstoedit binary is installed or - on Unix like systems only - alternatively into the lib directory in parallel to the bin directory where pstoedit is installed.

However, unless you also get a license key for the plugins, the additional drivers will slightly distort the resulting graphics. See the documentation that comes with the plugins for more details.

PRINCIPLE OF CONVERSION

pstoedit works by redefining some of PostScript's basic drawing operators, such as stroke or show (bitmaps drawn by the image operator are not supported by all output formats.) After redefining these operators, the PostScript or PDF file that needs to be converted is processed by a PostScript interpreter, e.g., Ghostscript (gs(1)). You normally need to have a PostScript interpreter installed in order to use this program. However, you can perform some "back end only" processing of files following the conventions of the pstoedit intermediate format by specifying the -bo option. See "Available formats and their specific options" below.

The output that is written by the interpreter due to the redefinition of the drawing operators is a kind of 'flat' PostScript file containing only simple operations such as moveto, lineto, show, etc. You can view this file using the -f debug option.

This output is read by the end-processing functions of pstoedit and triggers the drawing functions in the selected output format driver sometimes called also "back-end".

NOTES ON GHOSTSCRIPT

Although pstoedit was designed to allow the use of any kind of PostScript interpreter, it has only been tested in combination with Ghostscript (https://ghostscript.com).

Up to version 9.55 of Ghostscript, it's PDF interpreter was implemented in PostScript itself. That allowed pstoedit to handle PDF files in the same way as PostScript files since the same mechanisms for intercepting the drawing operations could be used.

However, from version 9.56 on, the PDF interpreter of Ghostscript was implemented in C and hence the interceptions used by pstoedit are no longer effective when processing PDF files.

You need to convert the PDF to PostScript at first before you can convert it into another format. You can use Ghostscript for that or also use the gs:ps2write (-f gs:ps2write) driver from pstoedit.

GENERAL OPTIONS

The following options are available:

[-include filename]

This option allows specifying an additional PostScript file that will be executed just before the normal input is read. This is helpful for including specific page settings or for disabling potentially unsafe PostScript operators, e.g., file, renamefile, or deletefile.

[-xscale number]

scale by a factor in x-direction

[-yscale number]

scale by a factor in y-direction

[-xshift number]

shift image in x-direction

[-yshift number]

shift image in y-direction

[-centered]

center image before scaling or shifting

[-minlinewidth number]

minimal line width. All lines thinner than this will be drawn in this line width - especially zero-width lines

[-pagenumberformat page number format specification]

format specification for page numbers in filename if -split is used. The specification is used to create the page number using sprintf. The specification shall not include the leading % nor the trailing d. Default is empty string which results in formatting the page number using %d. This results in page numbers like 1, 2, ..., 10. Sometimes you may want to have fixed length with leading 0, so you might want to specify 02 which means 2 digits with leading 0.

[-split]

Create a new file for each page of the input. For this the output filename must contain a %d which is replaced with the current page number. This option is automatically switched on for output formats that do not support multiple pages within one file, e.g. fig or gnuplot.

[-usebbfrominput]

If specified, pstoedit uses the BoundingBox as is (hopefully) found in the input file instead of one that is calculated by its own.

[-page page number]

Select a single page from a multi-page PostScript or PDF file.

[-rgb]

Since version 3.30 pstoedit uses the CMYK colors internally. The -rgb option turns on the old behavior to use RGB values.

[-useagl]

use Adobe Glyph List instead of the ISO Latin-1 table (this is experimental)

[-noclip]

do not use clipping (relevant only if output format supports clipping at all)

[-rotate angle (0-360)]

Rotate image by angle.

[-pagesize page format]

set page size for output medium. This option sets the page size for the output medium. Currently this is just used by the libplot output format driver, but might be used by other output format drivers in future. The page size is specified in terms of the usual page size names, e.g. letter or a4.

[-help]

show the help information

[-bo]

You can run backend processing only (without the PostScript interpreter frontend) by first running pstoedit -f dump infile dumpfile and then running pstoedit -f format -bo dumpfile outfile.

[-psarg argument string]

The string given with this option is passed directly to Ghostscript when Ghostscript is called to process the PostScript file for pstoedit. For example: -psarg "-r300x300". This causes the resolution to be changed to 300x300 dpi. (With older versions of Ghostscript, changing the resolution this way has an effect only if the -dis option is given.) If you want to pass multiple options to Ghostscript you can use multiple -psarg options -psarg opt1 -psarg opt2 -psarg opt2. See the Ghostscript manual for other possible options.

[-pslanguagelevel PostScript Language Level 1, 2, or 3 to be used.]

PostScript Language Level 1, 2, or 3 to be used. You can switch Ghostscript into PostScript Level 1 only mode by -pslanguagelevel 1. This can be useful for example if the PostScript file to be converted uses some Level 2 specific custom color models that are not supported by pstoedit. However, this requires that the PostScript program checks for the PostScript level supported by the interpreter and "acts" accordingly. The default language level is 3.

-f "format[:options]"

target output format recognized by pstoedit. Since other format drivers can be loaded dynamically, type pstoedit -help to get a full list of formats. See "Available formats and their specific options" below for an explanation of the [:options] to -f format. If the format option is not given, pstoedit tries to guess the target format from the suffix of the output filename. However, in a lot of cases, this is not a unique mapping and hence pstoedit demands the -f option.

[-gs either full path to the Ghostscript executable/DLL or - for Windows - just a version number (e.g. 10.01.0), in which case the version is used to look up the path from the registry.]

tells pstoedit which Ghostscript executable/DLL to use - overwrites the internal search heuristic

[-gsregbase Ghostscript base registry path]

registry path to use as a base path when searching Ghostscript interpreter. This option provides means to specify a registry key under HKLM/Software where to search for GS interpreter key, version and GS_DLL / GS_LIB values. Example: "-gsregbase MyCompany" means that HKLM/Software/MyCompany/GPL Ghostscript would be searched instead of HKLM/Software/GPL Ghostscript.

TEXT AND FONT HANDLING RELATED OPTIONS

The following options are available:

[-df font name]

Sometimes fonts embedded in a PostScript program do not have a fontname. For example, this happens in PostScript files generated by dvips(1). In such a case pstoedit uses a replacement font. The default for this is Courier. Another font can be specified using the -df option. -df Helvetica causes all unnamed fonts to be replaced by Helvetica.

[-nomaptoisolatin1]

Normally pstoedit maps all character codes to the ones defined by the ISO Latin1 encoding. If you specify -nomaptoisolatin1 then the encoding from the input PostScript is passed unchanged to the output. This may result in strange text output but on the other hand may be the only way to get some fonts converted appropriately. Try what fits best to your concrete case.

[-pngimage filename]

for debugging purpose mainly. Write result of processing also to a PNG file

[-dt]

draw text. Text is drawn as polygons. This might produce a large output file. This option is automatically switched on if the selected output format does not support text, e.g. gnuplot(1).

[-adt]

automatic draw text. This option turns on the -dt option selectively for fonts that seem to be no normal text fonts, e.g. Symbol.

[-ndt]

never draw text. Fully disable the heuristics used by pstoedit to decide when to "draw" text instead of showing it as text. This may produce incorrect results, but in some cases it might nevertheless be useful. "Use at own risk".

[-dgbm]

experimental - draw also bitmaps generated by fonts/glyphs

[-correctdefinefont]

Some PostScript files, e.g. such as generated by ChemDraw, use the PostScript definefont operator in a way that is incompatible with pstoedit's assumptions. The new font is defined by copying an old font without changing the FontName of the new font. When this option is applied, some "patches" are done after a definefont in order to make it again compatible with pstoedit's assumptions. This option is not enabled by default, since it may break other PostScript files. It is tested only with ChemDraw generated files.

[-pti]

precision text. Normally a text string is drawn as it occurs in the input file. However, in some situations, this might produce wrongly positioned characters. This is due to limitations in most output formats of pstoedit. They cannot represent text with arbitrary inter-letter spacing which is easily possible in PDF and PostScript. With -pta, each character of a text string is placed separately. With -pti, this is done only in cases when there is a non zero inter-letter spacing. The downside of "precision text" is a bigger file size and hard to edit text.

[-pta]

see -pti

[-uchar character]

Sometimes pstoedit cannot map a character from the encoding used by the PostScript file to the font encoding of the target format. In this case pstoedit replaces the input character by a special character in order to show all the places that could not be mapped correctly. The default for this is a "#". Using the -uchar option it is possible to specify another character to be used instead. If you want to use a space, use -uchar " ".

[-t2fontsast1]

Handle Type 2 fonts same as Type 1. Type 2 fonts sometimes occur as embedded fonts within PDF files. In the default mode, text using such fonts is drawn as polygons since pstoedit assumes that such a font is not available on the user's machine. If this option is set, pstoedit assumes that the internal encoding follows the same as for a standard font and generates normal text output. This assumption may not be true in all cases. But it is nearly impossible for pstoedit to verify this assumption - it would have to do a sort of OCR.

[-nfr]

In normal mode pstoedit replaces bitmap fonts with a font as defined by the -df option. This is done, because most output formats cannot handle such fonts. This behavior can be switched off using the -nfr option but then it strongly depends on the application reading the generated file whether the file is usable and correctly interpreted or not. Any problems are then out of control of pstoedit.

[-glyphs]

pass glyph names to the output format driver. So far no output format driver really uses the glyph names, so this does not have any effect at the moment. It is a preparation for future work.

[-useoldnormalization]

Just use this option in case the new heuristic introduced in 3.5 does not produce correct results - however, this normalization of font encoding will always be a best-effort approach since there is no real general solution to it with reasonable effort

[-fontmap name of font map file for pstoedit]

The font map is a simple text file containing lines in the following format:

document_font_name target_font_name
Lines beginning with % are considered comments.
For font names with spaces use the "font name with spaces" notation.

If a target_font_name starts with /, it is regarded as alias to a former entry.

Each font name found in the document is checked against this mapping and if there is a corresponding entry, the new name is used for the output.

If the -fontmap option is not specified, pstoedit automatically looks for the file drivername.fmp in the installation directory and uses that file as a default fontmap file if available. The installation directory is:

DRAWING RELATED OPTIONS

The following options are available:

[-nc]

no curves. Normally pstoedit tries to keep curves from the input and transfers them to the output if the output format supports curves. If the output format does not support curves, then pstoedit replaces curves by a series of lines (see also -flat option). However, in some cases the user might wish to have this behavior also for output formats that originally support curves. This can be forced via the -nc option.

[-mergelines]

Some output formats permit the representation of filled polygons with edges that are in a different color than the fill color. Since PostScript does not support this by the standard drawing primitives directly, drawing programs typically generate two objects (the outline and the filled polygon) into the PostScript output. pstoedit is able to recombine these, if they follow each other directly and you specify -mergelines. However, this merging is not supported by all output formats due to restrictions in the target format.

[-filledrecttostroke]

Rectangles filled with a solid color can be converted to a stroked line with a width that corresponds to the width of the rectangle. This is of primary interest for output formats which do not support filled polygons at all. But it is restricted to rectangles only, i.e. it is not supported for general polygons

[-mergetext]

In order to produce nice looking text output, programs producing PostScript files often split words into smaller pieces which are then placed individually on adjacent positions. However, such split text is hard to edit later on and hence it is sometime better to recombine these pieces again to form a word (or even sequence of words). For this pstoedit implements some heuristics about what text pieces are to be considered parts of a split word. This is based on the geometrical proximity of the different parts and seems to work quite well so far. But there are certainly cases where this simple heuristic fails. So please check the results carefully.

[-ssp]

simulate subpaths. Several output formats do not support PostScript paths containing subpaths, i.e. paths with intermediate movetos. In the normal case, each subpath is treated as an independent path for such output formats. This can lead to bad looking results. The most common case where this happens is if you use the -dt option and show some text with letters like e, o, or b, i.e. letters that have a "hole". When the -ssp option is set, pstoedit tries to eliminate these problems. However, this option is CPU time intensive!

[-sfill]

simulate filling by individual strokes.

[-flat flatness factor]

If the output format does not support curves in the way PostScript does or if the -nc option is specified, all curves are approximated by lines. Using the -flat option one can control this approximation. This parameter is directly converted to a PostScript setflat command. Higher numbers, e.g. 10 give rougher, lower numbers, e.g. 0.1, give finer approximations.

[-sclip]

simulate clipping. Most output formats of pstoedit do not have native support for clipping. For that pstoedit offers an option to perform the clipping of the graphics directly without passing the clippath to the output driver. However, this results in curves being replaced by a lot of line segments and thus larger output files. So use this option only if your output looks different from the input due to clipping. In addition, this "simulated clipping" is not exactly the same as defined in PostScript. There might be lines drawn at double size. Also clipping of text is not supported unless you also use the -dt option.

DIAGNOSTIC AND DEBUG OPTIONS

The following options are available:

[-dis]

Open a display during processing by Ghostscript. Some files only work correctly this way.

[-q]

quiet mode - do not write startup message

[-nq]

no exit from the PostScript interpreter. Normally Ghostscript exits after processing the pstoedit input-file. For debugging it can be useful to avoid this. If you do, you will have to type quit at the GS> prompt to exit from Ghostscript.

[-v]

Switch on verbose mode. Some additional information is shown during processing.

[-vl ]

Switch on verbose mode with a given level. Some additional information is shown during processing.

[-nb]

Since version 3.10 pstoedit uses the -dDELAYBIND option when calling Ghostscript. Previously the -dNOBIND option was used instead but that sometimes caused problems if a user's PostScript file overloaded standard PostScript operator with totally new semantic, e.g. lt for lineto instead of the standard meaning of "less than". Using -nb the old style can be activated again in case the -dDELAYBIND gives different results as before. In such a case please also contact the author.

[-rdb]

Since version 3.10 pstoedit uses the -dDELAYBIND option when calling Ghostscript. But in version 9.22 of Ghostscript, that option is not supported anymore because of security reasons. As a fallback, that version provides the REALLYDELAYBIND option and pstoedit can use this if you supply the -rdb option. Use this with caution as it might open security risks, e.g. a PostScript file injecting some malicious code into PostScript standard operators. However, not using this option can cause some of the PostScript drawings operations to be not seen by pstoedit, hence causing missing artefacts in the output. Later versions of Ghostscript will probably support -dDELAYBIND again. But also in that case the security risk remains. So be careful with what files you process with pstoedit and Ghostscript.

[-ups]

write text as plain string instead of hex string in intermediate format - normally useful for trouble shooting and debugging only.

[-keep]

keep the intermediate files produced by pstoedit - for debug purposes only

[-debugfonthandling]

writes verbose messages related to internal font processing - for debug purposes only

[-gstest]

perform a basic test of the interworking with Ghostscript

[-fakedateandversion]

Just for regression testing - uses a constant date and version string.

INPUT AND OUTFILE FILE ARGUMENTS

[ inputfile [outputfile] ]

If neither an input nor an output file is given as argument, pstoedit works as filter reading from standard input and writing to standard output. The special filename "-" can also be used. It represents standard input if it is the first on the command line and standard output if it is the second. So "pstoedit - output.xxx" reads from standard input and writes to output.xxx

FORMAT GROUP: PSF PS DEBUG DUMP PS2AI GS

This group consists of the following variants:

psf:

Flattened PostScript (no curves).

ps:

Simplified PostScript with curves.

debug:

for test purposes.

dump:

for test purposes (same as debug).

ps2ai:

Adobe Illustrator via ps2ai.ps of Ghostscript.

gs:

any device that Ghostscript provides - use gs:format, e.g. gs:pdfwrite.

No format specific options

FORMAT GROUP: GMFA GMFB PLOT PLOT-CGM PLOT-AI PLOT-SVG PLOT-PS PLOT-FIG PLOT-PCL PLOT-HPGL PLOT-TEK

This group consists of the following variants:

gmfa:

ASCII GNU metafile.

gmfb:

binary GNU metafile.

plot:

GNU libplot output types, e.g. plot:-plotformat X.

plot-cgm:

cgm via GNU libplot.

plot-ai:

ai via GNU libplot.

plot-svg:

svg via GNU libplot.

plot-ps:

ps via GNU libplot.

plot-fig:

fig via GNU libplot.

plot-pcl:

pcl via GNU libplot.

plot-hpgl:

hpgl via GNU libplot.

plot-tek:

tek via GNU libplot.

The following driver specific options are available in this group:

[-plotformat string]

plotutil format to generate

MAGICK - MAGICK DRIVER COMPATIBLE WITH VERSION 7.0.7 OF IMAGEMAGICK.

This driver uses the C++ API of ImageMagick or GraphicsMagick to finally produce different output formats. The output format is determined automatically by Image-/GraphicsMagick based on the suffix of the output filename. So an output file test.png will force the creation of an image in PNG format. This binary of pstoedit was compiled against version 7.0.7 of ImageMagick.

No format specific options

SWF - SWF DRIVER:

The following driver specific options are available:

[-cubic]

cubic ???

[-trace]

trace ???

FORMAT GROUP: SVG XAML

This group consists of the following variants:

svg:

Scalable Vector Graphics.

xaml:

eXtensible Application Markup Language.

The following driver specific options are available in this group:

[-localdtd]

use local DTD

[-standalone]

create stand-alone type svg

[-withdtd]

write DTD

[-withgrouping]

write also ordinary save/restores as SVG group

[-nogroupedpath]

do not write a group around paths

[-noviewbox]

do not write a view box

[-texmode]

TeX mode

[-imagetofile]

write raster images to separate files instead of embedding them

[-notextrendering]

do not write textrendering attribute

[-border number]

additional border to draw around bare bounding box (in percent of width and height)

[-title string]

text to use as title for the generated document

FORMAT GROUP: CGMB1 CGMB CGMT

This group consists of the following variants:

cgmb1:

CGM Binary format (V1).

cgmb:

CGM Binary format (V3).

cgmt:

CGM Textual format.

No format specific options

MIF - (FRAME)MAKER INTERMEDIATE FORMAT

The following driver specific options are available:

[-nopage]

do not add a separate Page entry

RTF - RICH TEXT FORMAT

No format specific options

FORMAT GROUP: WEMF WEMFC WEMFNSS

This group consists of the following variants:

wemf:

Wogl's version of EMF.

wemfc:

Wogl's version of EMF with experimental clip support.

wemfnss:

Wogl's version of EMF - no subpaths.

The following driver specific options are available in this group:

[-df]

write info about font processing

[-dumpfontmap]

write info about font mapping

[-size:psbbox]

use the bounding box as calculated by the PostScript frontend as size

[-size:fullpage]

set the size to that of the full page

[-size:automatic]

let MS Windows calculate the bounding box (default)

[-keepimages]

debug option - keep the embedded bitmaps as external files

[-useoldpolydraw]

do not use MS Windows' PolyDraw but an emulation of it - sometimes needed for certain programs reading the EMF files

[-donotusepolydraw]

use lineto and moveto instead of polydraw when drawing a path

[-OO]

generate OpenOffice compatible EMF file

FORMAT GROUP: HPGL PCL

This group consists of the following variants:

hpgl:

HPGL code.

pcl:

PCL code.

The following driver specific options are available in this group:

[-penplotter]

plotter is pen plotter (i.e. no support for specific line widths)

[-pencolorsfromfile]

read pen colors from file drvhpgl.pencolors in pstoedit's data directory

[-pencolors number]

maximum number of pen colors to be used by pstoedit (default 0) -

[-filltype string]

select fill type e.g. FT 1

[-hpgl2]

Use HPGL/2 instead of HPGL/1

[-rot90]

rotate hpgl by 90 degrees

[-rot180]

rotate hpgl by 180 degrees

[-rot270]

rotate hpgl by 270 degrees

PCB-RND - PCB-RND FORMAT

See also: http://repo.hu/projects/pcb-rnd and http://www.penguin.cz/~utx/pstoedit-pcb/

The following driver specific options are available:

[-grid double number]

attempt to snap relevant output to grid (mils) and put failed objects to a different layer

[-snapdist double number]

grid snap distance ratio (0 < snapdist <= 0.5, default 0.1)

[-tshiftx double number]

additional x shift measured in target units (mils)

[-tshifty double number]

additional y shift measured in target units (mils)

[-mm]

switch to metric units (mm)

[-forcepoly]

force all objects to be interpreted as polygons

PIC - PIC FORMAT FOR TROFF ET.AL.

The following driver specific options are available:

[-troff]

troff mode (default is groff)

[-landscape]

landscape output

[-portrait]

portrait output

[-keepfont]

print unrecognized literally

[-text]

try not to make pictures from running text

[-debug]

enable debug output

ASY - ASYMPTOTE FORMAT

No format specific options

CAIRO - CAIRO DRIVER

generates compilable c code for rendering with cairo

The following driver specific options are available:

[-pango]

use pango for font rendering

[-funcname string]

sets the base name for the generated functions and variables. e.g. myfig

[-header string]

sets the output file name for the generated C header file. e.g. myfig.h

CFDG - CONTEXT FREE DESIGN GRAMMAR

Context Free Design Grammar, usable by Context Free Art (http://www.contextfreeart.org/)

No format specific options

FORMAT GROUP: DXF DXF_14 DXF_S

This group consists of the following variants:

dxf:

CAD exchange format version 9 - only limited features. Consider using dxf_14 instead..

dxf_14:

CAD exchange format version 14 supporting splines and linetypes.

dxf_s:

CAD exchange format version 14 supporting splines and linetypes.

The following driver specific options are available in this group:

[-polyaslines]

use LINE instead of POLYLINE in DXF

[-mm]

use mm coordinates instead of points in DXF (mm=pt/72*25.4)

[-ctl]

map colors to layers

[-filltohatch]

generate hatch objects from fill operations (still experimental)

[-splineaspolyline]

approximate splines with PolyLines (only for -f dxf_s)

[-splineasnurb]

experimental (only for -f dxf_s)

[-splineasbspline]

experimental (only for -f dxf_s)

[-splineassinglespline]

experimental (only for -f dxf_s)

[-splineasmultispline]

experimental (only for -f dxf_s)

[-splineasbezier]

use Bezier splines in DXF format (only for -f dxf_s)

[-splineprecision number]

number of samples to take from spline curve when doing approximation with -splineaspolyline or -splineasmultispline - should be >= 2 (default 5)

[-dumplayernames]

dump all layer names found to standard output

[-layers string]

layers to be shown (comma separated list of layer names, no space)

[-layerfilter string]

layers to be hidden (comma separated list of layer names, no space)

FORMAT GROUP: FIG XFIG TFIG

This group consists of the following variants:

fig:

.fig format for xfig.

xfig:

.fig format for xfig.

tfig:

.fig format for xfig - test only version.

The xfig format driver supports special fontnames, which may be produced by using a fontmap file. The following types of names are supported:

General notation:
"PostScript Font Name" ((LaTeX|PostScript|empty)(::special)::)XFigFontName
Examples:
Helvetica LaTeX::SansSerif
Courier LaTeX::special::Typewriter
GillSans "AvantGarde Demi"
Albertus PostScript::special::"New Century Schoolbook Italic"
Symbol ::special::Symbol (same as PostScript::special::Symbol)

The following driver specific options are available in this group:

[-startdepth number]

set the initial depth (default 999)

[-metric]

switch to centimeter display (default inches)

[-usecorrectfontsize]

do not scale fonts for xfig. Use this if you also use this option with xfig

[-depth number]

set the page depth in inches (default 11)

GCODE - EMC2 GCODE FORMAT

See also: http://linuxcnc.org/

No format specific options

GNUPLOT - GNUPLOT FORMAT

No format specific options

GSCHEM - GSCHEM FORMAT

See also: http://wiki.geda-project.org/geda:gaf

No format specific options

IDRAW - INTERVIEWS DRAW FORMAT (EPS)

No format specific options

JAVA1 - JAVA 1.PPLET SOURCE CODE

The following driver specific options are available:

[java_class_name string]

name of java class to generate

JAVA2 - JAVA 2 SOURCE CODE

The following driver specific options are available:

[java_class_name string]

name of java class to generate

KIL - .KIL FORMAT FOR KONTOUR

No format specific options

LATEX2E - LaTeX2E PICTURE FORMAT

The following driver specific options are available:

[-integers]

round all coordinates to the nearest integer

LWO - LIGHTWAVE 3D OBJECT FORMAT

No format specific options

MMA - MATHEMATICA GRAPHICS

The following driver specific options are available:

[-eofillfills]

Filling is used for eofill (default is not to fill)

MPOST - METAPOST FORMAT

No format specific options

NOIXML - NEMETSCHEK NOI XML FORMAT

Nemetschek Object Interface XML format

The following driver specific options are available:

[-r string]

Allplan resource file

[-bsl number]

Bezier Split Level (default 3)

PCBI - ENGRAVE DATA - INSULATE/PCB FORMAT

No format specific options

PCB - PCB FORMAT

See also: http://pcb.sourceforge.net and http://www.penguin.cz/~utx/pstoedit-pcb/

The following driver specific options are available:

[-grid double number]

attempt to snap relevant output to grid (mils) and put failed objects to a different layer

[-snapdist double number]

grid snap distance ratio (0 < snapdist <= 0.5, default 0.1)

[-tshiftx double number]

additional x shift measured in target units (mils)

[-tshifty double number]

additional y shift measured in target units (mils)

[-mm]

switch to metric units (mm)

[-stdnames]

use standard layer names instead of descriptive names

[-forcepoly]

force all objects to be interpreted as polygons

PCBFILL - PCB FORMAT WITH FILLS

See also: http://pcb.sourceforge.net

No format specific options

PDF - ADOBE'S PORTABLE DOCUMENT FORMAT

No format specific options

PPTX - PRESENTATIONML (POWERPOINT) FORMAT

This is the format used internally by Microsoft PowerPoint. LibreOffice can also read/write PowerPoint files albeit with some lack of functionality.

The following driver specific options are available:

[-colors string]

"original" to retain original colors (default), "theme" to convert randomly to theme colors, or "theme-lum" also to vary luminance

[-fonts string]

use "windows" fonts (default), "native" fonts, or convert to the "theme" font

[-embed string]

embed fonts, specified as a comma-separated list of EOT-format font files

RIB - RENDERMAN INTERFACE BYTESTREAM

No format specific options

RPL - REAL3D PROGRAMMING LANGUAGE FORMAT

No format specific options

SAMPLE - SAMPLE DRIVER: IF YOU DO NOT WANT TO SEE THIS, UNCOMMENT THE CORRESPONDING LINE IN MAKEFILE AND MAKE AGAIN

This is a long description for the sample driver

The following driver specific options are available:

[-sampleoption integer]

just an example

SK - SKETCH FORMAT

No format specific options

SVM - STARVIEW/OPENOFFICE.ORG METAFILE

StarView/OpenOffice.org metafile, readable from OpenOffice.org 1.0/StarOffice 6.0 and above.

The following driver specific options are available:

[-m]

map to Arial

[-nf]

emulate narrow fonts

TEXT - TEXT IN DIFFERENT FORMS

The following driver specific options are available:

[-height number]

page height in terms of characters

[-width number]

page width in terms of characters

[-dump]

dump text pieces

TGIF - TGIF .OBJ FORMAT

The following driver specific options are available:

[-ta]

text as attribute

TK - TK AND/OR TK.PPLET SOURCE CODE

The following driver specific options are available:

[-R]

swap HW

[-I]

no impress

[-n string]

tagnames

VTK - VTK DRIVER: IF YOU DO NOT WANT TO SEE THIS, UNCOMMENT THE CORRESPONDING LINE IN MAKEFILE AND MAKE AGAIN

this is a long description for the VTKe driver

The following driver specific options are available:

[-VTKeoption integer]

just an example

FORMAT GROUP: WMF EMF

This group consists of the following variants:

wmf:

MS Windows Metafile.

emf:

Enhanced MS Windows Metafile.

The following driver specific options are available in this group:

[-m]

map to Arial

[-nf]

emulate narrow fonts

[-drawbb]

draw bounding box

[-p]

prune line ends

[-nfw]

Newer versions of MS Windows (2000, XP, Vista, 7, ...) will not accept WMF/EMF files generated when this option is set and the input contains text. But if this option is not set, then the WMF/EMF driver will estimate interletter spacing of text using a very coarse heuristic. This may result in ugly looking output. On the other hand, OpenOffice can still read EMF/WMF files where pstoedit delegates the calculation of the inter letter spacing to the program reading the WMF/EMF file. So if the generated WMF/EMF file shall never be processed under MS Windows, use this option. If WMF/EMF files with high precision text need to be generated under *nix the only option is to use the -pta option of pstoedit. However that causes every text to be split into single characters which makes the text hard to edit afterwards. Hence the -nfw option provides a sort of compromise between portability and nice to edit but still nice looking text. Again - this option has no meaning when pstoedit is executed under MS Windows anyway. In that case the output is portable but nevertheless not split and still looks fine.

[-winbb]

let the MS Windows API calculate the Bounding Box (MS Windows only)

[-OO]

generate OpenOffice compatible EMF file

AUTOTRACE

pstoedit cooperates with autotrace. Autotrace can now produce a dump file for further processing by pstoedit using the -bo (back-end only) option. Autotrace is a program written by a group around Martin Weber and can be found at https://sourceforge.net/projects/autotrace/.

PS2AI

The ps2ai output format driver is not a native pstoedit output format driver. It does not use the pstoedit PostScript flattener, instead it uses the PostScript program ps2ai.ps which is installed in the Ghostscript distribution directory. It is included to provide the same "look-and-feel" for the conversion to AI. However, lot's of files do not convert nicely or at all using ps2ai.ps. So a native pstoedit driver would be much better. Anyone out there to take this? The AI format is usable for example by Mayura Draw (http://www.mayura.com). Also a driver to the Mayura native format would be nice.

An alternative to the ps2ai based driver is available via the -f plot:ai format if the libplot(ter) is installed.

You should use a version of Ghostscript greater than or equal to 6.00 for using the ps2ai output format driver.

METAPOST

Note that, as far as Scott knows, MetaPost does not support PostScript's eofill. The MetaPost output format driver just converts eofill to fill, and issues a warning if verbose is set. Fortunately, very few PostScript programs rely on the even-odd fill rule, even though many specify it.

For more on MetaPost see:

http://tug.org/metapost

CONTEXT FREE - CFDG

The driver for the CFDG format (drvcfdg) defines one shape per page of PostScript, but only the first shape is actually rendered (unless the user edits the generated CFDG code, of course). CFDG does not support multi-page output, so this probably is a reasonable thing to do.

For more on Context Free see: http://www.contextfreeart.org/

LaTeX2E

*

LaTeX2e's picture environment is not very powerful. As a result, many elementary PostScript constructs are ignored -- fills, line thicknesses (besides "thick" and "thin"), and dash patterns, to name a few. Furthermore, complex pictures may overrun TeX's memory capacity. (The eepic package overcomes many such restrictions.)

*

Some PostScript constructs are not supported directly by "picture", but can be handled by external packages. If a figure uses color, the top-level document will need to do a "\usepackage{color}" or "\usepackage{xcolor}". And if a figure contains rotated text, the top-level document will need to do a "\usepackage{rotating}".

*

All lengths, coordinates, and font sizes output by the output format driver are in terms of \unitlength, so scaling a figure is simply a matter of doing a "\setlength{\unitlength}{...}".

*

The output format driver currently supports one output format driver specific option, "integers", which rounds all lengths, coordinates, and font sizes to the nearest integer. This makes hand-editing the picture a little nicer.

*

Why is this output format driver useful? One answer is portability; any LaTeX2e system can handle the picture environment, even if it cannot handle PostScript graphics. (pdfLaTeX comes to mind here.) A second answer is that pictures can be edited easily to contain any arbitrary LaTeX2e code. For instance, the text in a figure can be modified to contain complex mathematics, non-Latin alphabets, bibliographic citations, or -- the real reason Scott wrote the LaTeX2e output format driver -- hyperlinks to the surrounding document (with help from the hyperref package).

CREATING A NEW OUTPUT FORMAT DRIVER

To implement a new output format driver you can start from drvsampl.cpp and drvsampl.h. See also comments in drvbase.h and drvfuncs.h for an explanation of methods that should be implemented for a new output format driver.