pam_mount.conf(5) pam_mount 2.20 pam_mount.conf(5)
Name
pam_mount.conf - Description of the pam_mount configuration file
Overview
The pam_mount configuration file defines soft defaults for commands
pam_mount will be executing, the messages it will show, and which
volumes to mount on login. Since pam_mount 0.18, the configuration file
is written in XML so as to simplify the pam_mount code base while
giving formatting freedom to the end-user. Special characters like <, >
and & that are used by XML itself must be encoded as <, > and
&, respectively; additionally, " must be encoded as " within a
"" area, but these three/four symbols are unlikely to be seen often
anyway.
Do not use comments inside elements taking verbatim text, like
- this is not handled by the pam_mount XML
tree parser.
Volume definitions
Volumes are defined with the element, which primarily takes
the parameters as attributes, such as
and define to mount what for whom and how. There are a lot of tunables,
which are described in this section.
Simple user control
The following attributes control whether the volume is going to get
mounted once the user logs in. By default, volumes apply to all users,
and specifying attributes limits it to the given conditions, i.e. they
are logically ANDed. There is a more powerful and verbose mechanism
for specifying complex conditions, described further below in the
section "Extended user control".
user="username"
Limit the volume to the specified user, identified by name
uid="number" or uid="number-number"
Limit the volume to the specified user(s), identified by UID or
UID range.
pgrp="groupname"
Limit the volume to users which have the group identified by
name as their primary group.
gid="number" or gid="number-number"
Limit the volume to users which have the group(s) given by GID
or GID range as a primary group.
sgrp="groupname"
Limit the volume to users which are a member of the group
identified by name (either as primary or secondary group).
Volume configuration
The following attributes select volume source, destination, options and
so on.
fstype="type"
The filesystem type, which can be anything your kernel,
userspace and pam_mount understand. If the fstype specifies a
pam_mount-special type, pam_mount will handle it. Otherwise, the
fstype is passed to mount(8) which then in turn looks for a
userspace helper /sbin/mount.fstype and runs that if it exists,
and in any other case, mount(8) would call mount(2) to cause the
kernel to directly mount it. mount(8) knows of an auto fstype,
which might be helpful in some cases. Not specifying the fstype
attribute implies fstype="auto". Note that mounting with auto
may fail if the filesystem kernel module is not loaded yet,
since mount(8) will check /proc/partitions.
The fstypes cifs, smbfs, ncpfs, fuse, nfs and nfs4 are
overridden by pam_mount and we run the respective helper
programs directly instead of invoking mount(8) with the basic
default set of arguments which are often insufficient for
networked filesystems. See this manpage's section "Examples"
below for more details.
noroot="1"
Call the mount program without root privileges. It defaults to
yes for the fuse fstype, because FUSE volumes must be mounted as
the user that logs in to get access to the files by default.
server="name"
Defines the server to which to connect in case of cifs, smbfs
and ncpfs and nfs fstypes. For all other fs types, this
attribute is ignored. You can also specify the server in the
path attribute instead, but need to adhere to the specific
syntax that is a particular fstype requires. (E.g. CIFS uses
"//server/path", whereas NFS uses "server:path", etc.)
path="path"
This mandatory attribute specifies the location of the volume,
relative to the server (if specified).
mountpoint="directory"
This specifies the destination directory onto which the volume
is mounted. "~" expands to the user's home directory as present
in the passwd database, according to sh semantics. "~name" is
not supported. If this attribute is omitted, the location is
read from /etc/fstab, which also requires path to be a device or
a source directory of an fstab entry.
header="path"
This specifies a detached (separated) metadata file where the
LUKS header is stored. This correlates with the `cryptsetup
--header` option. If this attribute is omitted, the detached
LUKS header feature is not used.
options="..."
Specifies the mount options. If omitted and /etc/fstab is used
(see mountpoint), the options will also be sources from fstab.
ssh="0" or ssh="1"
The ssh option enables an input hack wrapper (zerossh, see
fd0ssh(1)) for this volume to hand the password to ssh over an
ssh-specific mechanism. Enable this option for any mount
involving the SSH binary, e.g. ccgfs or sshfs. Do not enable it
for anything else or the login will most likely hang.
empty_pass="0" or empty_pass="1"
The empty_pass option controls behavior when an empty password
is supplied or a password is unavailable. The default value of
true will try to unlock a volume with an empty string key if no
password is available. When empty_pass is false, pam_mount will
not attempt to mount the volume unless a non-empty password is
available.
cipher="cipher"
Cryptsetup cipher name for the volume. To be used with the crypt
fstype.
fskeycipher="ciphertype"
OpenSSL cipher name for the fskey. Use with the crypt fstype
(dm-crypt and LUKS). The special cipher keyword "none" may be
used to directly pass the file's contents to cryptsetup without
decryption by OpenSSL.
fskeyhash="hash"
OpenSSL hash name for the fskey.
fskeypath="path"
Path to the filesystem key.
Variables
Within attributes and commands (see later section), specific
placeholders or variables, identified by %(name) may be used. These are
substituted at command invocation time.
%(USER)
Expands to the username of the user logging in.
%(DOMAIN_NAME), %(DOMAIN_USER)
Winbind has special UNIX usernames in the form of
"domain\username", and %(DOMAIN_NAME) and %(DOMAIN_USER) provide
the split parts of it. This is useful when a sharename on an
MSAD server is the same as the username, e.g. .
%(USERUID), %(USERGID)
The numeric UID and GID of the primary group of the user logging
in. This is obtained via getpw*(), not getuid(). It is useful
in conjunction with the uid= or gid= mount options, e.g. . Note that you do not need to
specify uid=%(USERUID) for smbfs or cifs mounts because this is
already done automatically by pam_mount.
%(GROUP)
The name of the group for %(USERGID).
All other variables you might find in the source code are internal to
pam_mount, and are likely not to be expanded when you would expect it.
pam_mount parameters
Besides volumes, there are other elements allowed in pam_mount.conf.xml
that control pam_mount's own behavior.
General tunables
Enables verbose output during login to stderr and syslog. Some
programs do not cope with output sent on stderr, see
doc/bugs.txt for a list. 0 disables debugging, 1 enables
pam_mount tracing, and 2 additionally enables tracing in
mount.crypt. The default is 0. As the config file is parsed
linearly, the directive takes effect once it is seen -
it it thus advised to put it near the start of the file, before
any definitions.
Programs exist that do not terminate when the session is closed.
(This applies to the "final" close, i.e. when the last user
session ends.) Examples are processes still running in the
background; or a broken X session manager that did not clean up
its children, or other X programs that did not react to the X
server termination notification. pam_mount can be configured to
kill these processes and optionally wait before sending signals.
Individual users may define additional volumes in a file by the
specified name relative to their home directory. The presence of
in the master config file enables this feature. If
turned on, users may mount and unmount any volumes they specify
and that they have ownership of (in case of local mounts). The
mount process is executed as superuser. This may have security
implications, so this feature is disabled by default.
Luserconfigs are parsed after any volumes from the global
configuration file have been mounted, so that first mounting
home directories with a global config and then mounting further
volumes from luserconfigs is possible.
The elements determine which options may be
specified in in per-user configuration files (see
). It does not apply to the master file. Specifying
is forbidden and ignored in per-user configs. The
default allowed list consists of "nosuid,nodev", and this
default is cleared when the first allow="..." attribute is seen
by the config parser. All further allow="..." are additive,
though.
Any options listed in deny may not appear in the option list of
per-user mounts. The default deny list is empty.
All options listed in require must appear in the option list of
per-user mounts. The default require list consists of
"nosuid,nodev", and like allow="", is cleared when first
encountered by the parser, and is otherwise additive.
directories...
The default for the PATH environmental variable is not
consistent across distributions, and so, pam_mount provides its
own set of sane defaults which you may change at will.
Volume-related
Controls automatic creation and removal of mountpoints. If a
mountpoint does not exist when the volume is about to be
mounted, pam_mount can be instructed to create one using the
enable attribute. Normally, directories created this way are
retained after logout, but remove may be set to true to remove
the mountpoint again, but only if it was automatically created
by pam_mount in the same session before.
Auxiliary programs
Some mount programs need special default parameters to properly
function. It is good practice to specify uid= for CIFS for example,
because it is mounted as root and would otherwise show files belonging
to root instead of the user logging in.
program...
fd0ssh is a hack around OpenSSH that essentially makes it read
passwords from stdin even though OpenSSH normally does not do
that.
fsck -p %(FSCKTARGET)
Local volumes will be checked before mounting if this program is
set.
ofl -k%(SIGNAL) %(MNTPT)
The Open File Lister is used to identify processes using files
within the given subdirectory, and optionally send a signal to
those processes.
pmvarrun ...
pmvarrun(8) is a separate program to manage the reference count
tracking user sessions.
Mount programs
Commands to mount/unmount volumes. They can take parameters, as shown.
You can specify either absolute paths, or relative ones, in which case
$PATH will be searched. Since login programs have differing default
PATHs, pam_mount has its own path definition (see above).
mount -t %(FSTYPE) ...
The regular mount program.
umount %(MNTPT)
Unless there is a dedicated umount program for a given
filesystem type, the regular umount program will be used.
Linux supports lazy unmounting using `/sbin/umount -l`. This may
be dangerous for encrypted volumes because the underlying device
is not unmapped. Loopback devices are also affected by this (not
being unmapped when files are still open). Also, unmount on SMB
volumes needs to be called on %(MNTPT) and not %(VOLUME).
Commands for various mount programs. Not all have a dedicated umount
helper because some do not need one.
mount.cifs ...
mount.crypt ...
umount.crypt %(MNTPT)
Mount helpers for dm-crypt and LUKS volumes.
mount.fuse ...
fuserumount ...
ncpmount ...
ncpumount ...
mount %(SERVER):%(VOLUME) ...
smbmount ...
smbumount ...
Messages
pam_mount password:
When pam_mount cannot obtain a password through PAM, or is
configured to not do so in the first place, and is configured to
ask for a password interactively as a replacement, this prompt
will be shown.
reenter...:
In case the 'session' PAM block does not have the password (e.g.
on su from root to user), it will ask again. This prompt can
also be customized.
Extended user control
Sometimes, the simple user control attributes for the element
are not sufficient where one may want to build more complex expressions
as to whom a volume applies. Instead of attributes, extended user
control is set up using additional elements within , for
example
students
profs
Which translates to (students && !profs).
Logical operators
*
All elements within this one are logically ANDed. Any number of
elements may appear.
*
All elements within this one are logically ORed. Any number of
elements may appear.
{2}
The two elements within the are logically XORed.
The single element within the is logically negated.
User selection
username
Match against the given username.
number or number-number
Match the UID of the user logging in against a UID or UID range.
number or number-number
Match the primary group of the user logging in against a GID or
GID range.
groupname
Check if the user logging in has groupname as the primary group.
groupname
Check if the user logging in is a member of the group given by
name (i.e. it is either a primary or secondary group).
Attributes
icase="yes" or icase="no"
The icase attribute may be used on , and to
enable case-insensitive matching (or not). It defaults to "no".
regex="yes" (or no)
The regex attribute may be used on , and to
enable interpreting the text content of the tag as a Perl-
compatible regular expression pattern. This attribute may be
combined with "icase" (see above). Example: joe matches any user who has the letter
sequence "joe" anywhere in their username. Therefore, use the
regex feature cautiously and consider adding ^ and $ anchors to
limit security surprises. Example: ^.*joe.*$ if you really wanted to match the
sequence at any position.
Examples
Remember that ~ can be used in the mountpoint attribute to denote the
home directory as retrievable through getpwent(3).
sshfs and ccgfs
Not specifying any path after the colon (:) uses the path wherever ssh
will put you in, usually the home directory. With fd0ssh (package
hxtools) installed:
Without fd0ssh:
Note that sshfs's "password_stdin" option tries to locate a string
"assword" on ssh's output, while fd0ssh is rather using the "askpass"
API, which might also work with passphrase-protected SSH keys whose
prompt is quite different.
encfs 1.4.x and up
(encfs 1.3 is no longer supported.)
NFS mounts
CIFS mounts
Bind mounts
This may come useful in conjunction with pam_chroot:
tmpfs mounts
Volatile tmpfs mount with restricted size (thanks to Mike Hommey for
this example):
dm-crypt volumes
Crypt mounts require a kernel with CONFIG_BLK_DEV_DM and
CONFIG_DM_CRYPT enabled, as well as all the ciphers that are going to
be used, e.g. CONFIG_CRYPTO_AES, CONFIG_CRYPTO_BLOWFISH,
CONFIG_CRYPTO_TWOFISH.
LUKS volumes
volume path="/home/%(USER).img" mountpoint="~"
header="/home/%(USER)-header.img" />
cryptoloop volumes
cryptoloop is not explicitly supported by pam_mount. Citing the Linux
kernel config help text: "WARNING: This device [cryptoloop] is not safe
for journal[l]ed filesystems[...]. Please use the Device Mapper [dm-
crypt] module instead."
OpenBSD encrypted home
OpenBSD encrypted home directory example:
pam_mount 2.20 2023-08-17 pam_mount.conf(5)