NVME-SNDK-VS-TELE(1)              NVMe Manual             NVME-SNDK-VS-TELE(1)

NAME
       nvme-sndk-vs-telemetry-controller-option - Disable/Enable the
       controller initiated option of the telemetry log page.

SYNOPSIS
       nvme sndk vs-telemetry-controller-option <device>
                               [--disable, -d] [--enable, -e] [--status, -s]

DESCRIPTION
       For the NVMe device given, sends the sndk Vendor Specific set feature
       command to disable, enable or get current status the controller
       initiated option of the telemetry log page.

       The <device> parameter is mandatory NVMe character device (ex:
       /dev/nvme0).

       This will only work on Sandisk devices supporting this feature. Results
       for any other device are undefined.

OPTIONS
       -d, --disable
           Disables the controller initiated option of the telemetry log page.

       -e, --enable
           Enables the controller initiated option of the telemetry log page.

       -s, --status
           Returns the current status (enabled or disabled) of the controller
           initiated option of the telemetry log page.

EXAMPLES
       o   Disables the controller initiated option of the telemetry log page:

               # nvme sndk vs-telemetry-controller-option /dev/nvme0 --disable
               # nvme sndk vs-telemetry-controller-option /dev/nvme0 -d

       o   Enables the controller initiated option of the telemetry log page:

               # nvme sndk vs-telemetry-controller-option /dev/nvme0 --enable
               # nvme sndk vs-telemetry-controller-option /dev/nvme0 -e

       o   Gets the current status (enabled or disabled) of the controller
           initiated option of the telemetry log page:

               # nvme sndk vs-telemetry-controller-option /dev/nvme0 --status
               # nvme sndk vs-telemetry-controller-option /dev/nvme0 -s

NVME
       Part of the nvme-user suite.

NVMe                              05/01/2025              NVME-SNDK-VS-TELE(1)