NVME-RPMB-PROGRAM()                                        NVME-RPMB-PROGRAM()

NAME
       nvme-rpmb-program-key - Program the RPMB authentication key

SYNOPSIS
       nvme [<global-options>] rpmb program-key <device>
                               [--key=<key> | -k <key>]
                               [--keyfile=<key-file> | -g <key-file>]
                               [--target=<target-id> | -t <target-id>]

DESCRIPTION
       Programs the given authentication key to the specified RPMB target. As
       per the RPMB specification, this is a one time action per target which
       cannot be undone.

       The <device> parameter is mandatory and an NVMe character device (ex:
       /dev/nvme0) must be specified.

OPTIONS
       -t <target>, --target=<target>
           RPMB target id. This should be one of the supported RPMB targets as
           reported by nvme rpmb info. If nothing is given, the default of 0
           is used as the RPMB target.

       -k <key>, --key=<key>, -g <key-file>, --keyfile=<key-file>
           Authentication key to program. The key can be specified on the
           command line using --key or -k, or read from a file using --keyfile
           or -g. The key size must be between 1 and 223 bytes.

GLOBAL OPTIONS
       The following options are defined at the top-level nvme command and are
       available to this subcommand:

       --dry-run
           Print the command that would be executed, but do not actually
           execute it.

       --no-ioctl-probing
           Disable probing for 64-bit IOCTL support.

       --no-retries
           Disable retry logic on transient errors.

       -o <fmt>, --output-format=<fmt>
           Set the reporting format to normal, tabular, 'json, or binary. Only
           one output format may be used at a time.

       --output-format-version=<version>
           Select the output format version. Version 1 uses the original field
           naming, while version 2 (default) provides more consistent and
           script-friendly field names.

       --timeout=<ms>
           Set the timeout for the command in milliseconds.

       -v, --verbose
           Increase the level of detail in the output. May be specified
           multiple times to further increase verbosity.

       These options can also be set as machine-wide defaults in
       nvme-cli.conf(5). A command-line flag always overrides the file.

EXAMPLES
       o   Program SecretKey as authentication key for target 1

               # nvme rpmb program-key /dev/nvme0 --key='SecretKey' --target=1

NVME
       Part of the nvme-user suite

                                                           NVME-RPMB-PROGRAM()