NVME-OCP-SET-PLP()                                          NVME-OCP-SET-PLP()

NAME
       nvme-ocp-set-plp-health-check-interval - Define and set PLP health
       check interval

SYNOPSIS
       nvme ocp set-plp-health-check-interval <device> [--plp_health_interval=<plp_health_interval> | -p <plp_health_interval>] [--save | -s] [--no-uuid | -n]

DESCRIPTION
       Define Set PLP health check interval. No argument prints current mode.

       The <device> parameter is mandatory and may be either the NVMe
       character device (ex: /dev/nvme0) or block device (ex: /dev/nvme0n1).

       This will only work on OCP compliant devices supporting this feature.
       Results for any other device are undefined.

       On success it returns 0, error code otherwise.

OPTIONS
       -p <plp_health_interval>, --plp_health_interval=<plp_health_interval>
           Set the plp health check interval [31:16]

       -n, --no-uuid
           Do not try to automatically detect UUID index for this command
           (required for old OCP 1.0 support)

       -s, --save
           Save the attribute so that it persists through all power states and
           resets.

EXAMPLES
       o   Has the program issue a set-plp-health-check-interval to retrieve
           the 0xC6 set features.

               # nvme ocp eol-plp-failure-mode /dev/nvme0

NVME
       Part of the nvme-user suite.

                                                            NVME-OCP-SET-PLP()