NVME-FEAT-POWER-M(1) NVMe Manual NVME-FEAT-POWER-M(1)

nvme-feat-power-meas - Get and set power measurement feature

nvme [<global-options>] feat power-meas <device>
                        [--pwrmsr=<pwrmsr> | -p <pwrmsr>] [--pwrmsd=<pwrmsd> | -d <pwrmsd>]
                        [--sel=<select> | -S <select>] [--save | -s]

Get and set power measurement feature.

The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a namespace block device (ex: /dev/nvme0n1).

If any of the setting options (--pwrmsr or --pwrmsd) are specified, the command will update the power measurement configuration. If none of these options are specified, it will retrieve and display the current configuration.

On success it returns 0, error code otherwise.

-p <pwrmsr>, --pwrmsr=<pwrmsr>

Power Measurement Sample Rate. Specifies the sampling rate for power measurement.

-d <pwrmsd>, --pwrmsd=<pwrmsd>

Power Measurement Duration. Specifies the total duration for the power measurement window.

-S <select>, --sel=<select>

Select (SEL): This field specifies which value of the attributes to return in the provided data:

-s, --save

Save the attribute so that it persists through all power states and resets.

The following options are defined at the top-level nvme command and are available to this subcommand:

--dry-run

Print the command that would be executed, but do not actually execute it.

--no-ioctl-probing

Disable probing for 64-bit IOCTL support.

--no-retries

Disable retry logic on transient errors.

-o <fmt>, --output-format=<fmt>

Set the reporting format to normal, tabular, 'json, or binary. Only one output format may be used at a time.

--output-format-version=<version>

Select the output format version. Version 1 uses the original field naming, while version 2 (default) provides more consistent and script-friendly field names.

--timeout=<ms>

Set the timeout for the command in milliseconds.

-v, --verbose

Increase the level of detail in the output. May be specified multiple times to further increase verbosity.

These options can also be set as machine-wide defaults in nvme-cli.conf(5). A command-line flag always overrides the file.

•Has the program issue a feat power-meas to get the current configuration: 
# nvme feat power-meas /dev/nvme0
•Has the program issue a feat power-meas to set power measurement settings with saving enabled: 
# nvme feat power-meas /dev/nvme0 --pwrmsr=5 --pwrmsd=100 --save

Part of the nvme-user suite.

09/07/2026 NVMe