NVME-FDP-FEATURE(1)               NVMe Manual              NVME-FDP-FEATURE(1)

NAME
       nvme-fdp-feature - Show or change Flexible Data Placement (FDP) Feature

SYNOPSIS
       nvme fdp <device> [--endgrp-id=<NUM> | -e <NUM>]
                       [--enable-conf-idx=<NUM> | -c <NUM>]
                       [--disable | -d]
                       [--verbose | -v]

DESCRIPTION
       For the NVMe device given, configure and manage the Flexible Data
       Placement (FDP) feature.

       This command can be used to either show the current FDP feature
       configuration or change it.

            If no `--enable-conf-idx` or `--disable` options are provided, the current configuration is
           displayed.

       If the --enable-conf-idx or --disable options are provided,
       configuration is changed accordingly. Device may refuse the change if
       there is a namespace.

       The <device> parameter is mandatory and must be a NVMe character device
       (ex: /dev/nvme0)

OPTIONS
       -e <NUM>, --endgrp-id=<NUM>
           Specify the endurance group ID. This option is mandatory if device
           supports endurance groups.

       -c <NUM>, --enable-conf-idx=<NUM>
           Enable FDP feature with the specified configuration. The
           configuration index matches position listed by nvme-fdp-config(1).

       -d, --disable
           Disable the current FDP feature configuration.

       -v, --verbose
           Increase verbosity of the output.

SEE ALSO
       nvme-list-endgrp(1) nvme-fdp-config(1)

NVME
       Part of nvme-cli

NVMe                              03/29/2025               NVME-FDP-FEATURE(1)