NVME-CAPACITY-MGMT(1) NVMe Manual NVME-CAPACITY-MGMT(1) NAME nvme-capacity-mgmt - Send capacity management command to configure/create/delete Endurance Groups or NVM Sets, returns results. SYNOPSIS nvme capacity-mgmt [--operation= | -O ] [--element-id= | -i ] [--cap-lower= | -l ] [--cap-upper= | -u ] [--output-format= | -o ] [--verbose | -v] DESCRIPTION For the NVMe device given, sends a capacity management command to configure/create/delete the Endurance Groups or NVM Sets with the requested operation and element_id. On success, if the Operation is Create Endurance group or NVM Set, CQE CDW0 contains Created element identifier else CQE CDW0 is reserved. The parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a namespace block device (ex: /dev/nvme0n1). OPTIONS -O , --operation= Operation to be performed by the controller -i , --element-id= Value specific to the value of the Operation field. -l , --cap-lower= Least significant 32 bits of the capacity in bytes of the Endurance Group or NVM Set to be created -u , --cap-upper= Most significant 32 bits of the capacity in bytes of the Endurance Group or NVM Set to be created -o , --output-format= Set the reporting format to normal, json or binary. Only one output format can be used at a time. -v, --verbose Increase the information detail in the output. EXAMPLES No examples provided yet. NVME Part of the nvme-user suite NVMe 02/16/2024 NVME-CAPACITY-MGMT(1)