'\" t
.TH "NETWORKCTL" "1" "" "systemd 256.7" "networkctl"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el       .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
networkctl \- Query or modify the status of network links
.SH "SYNOPSIS"
.HP \w'\fBnetworkctl\fR\ 'u
\fBnetworkctl\fR [OPTIONS...] COMMAND [LINK...]
.SH "DESCRIPTION"
.PP
\fBnetworkctl\fR
may be used to query or modify the state of the network links as seen by
\fBsystemd\-networkd\fR\&. Please refer to
\fBsystemd-networkd.service\fR(8)
for an introduction to the basic concepts, functionality, and configuration syntax\&.
.SH "COMMANDS"
.PP
The following commands are understood:
.PP
\fBlist\fR [\fIPATTERN\&...\fR]
.RS 4
Show a list of existing links and their status\&. If one or more
\fIPATTERN\fRs are specified, only links matching one of them are shown\&. If no further arguments are specified shows all links, otherwise just the specified links\&. Produces output similar to:
.sp
.if n \{\
.RS 4
.\}
.nf
IDX LINK         TYPE     OPERATIONAL SETUP
  1 lo           loopback carrier     unmanaged
  2 eth0         ether    routable    configured
  3 virbr0       ether    no\-carrier  unmanaged
  4 virbr0\-nic   ether    off         unmanaged

4 links listed\&.
.fi
.if n \{\
.RE
.\}
.sp
The operational status is one of the following:
.PP
missing
.RS 4
The device is missing\&.
.sp
Added in version 245\&.
.RE
.PP
off
.RS 4
The device is powered down\&.
.sp
Added in version 240\&.
.RE
.PP
no\-carrier
.RS 4
The device is powered up, but does not yet have a carrier\&.
.sp
Added in version 240\&.
.RE
.PP
dormant
.RS 4
The device has a carrier, but is not yet ready for normal traffic\&.
.sp
Added in version 240\&.
.RE
.PP
degraded\-carrier
.RS 4
One of the bonding or bridge slave network interfaces is in off, no\-carrier, or dormant state, and the master interface has no address\&.
.sp
Added in version 242\&.
.RE
.PP
carrier
.RS 4
The link has carrier, or for bond or bridge master, all bonding or bridge slave network interfaces are enslaved to the master\&.
.sp
Added in version 240\&.
.RE
.PP
degraded
.RS 4
The link has carrier and addresses valid on the local link configured\&. For bond or bridge master this means that not all slave network interfaces have carrier but at least one does\&.
.sp
Added in version 240\&.
.RE
.PP
enslaved
.RS 4
The link has carrier and is enslaved to bond or bridge master network interface\&.
.sp
Added in version 242\&.
.RE
.PP
routable
.RS 4
The link has carrier and routable address configured\&. For bond or bridge master it is not necessary for all slave network interfaces to have carrier, but at least one must\&.
.sp
Added in version 240\&.
.RE
.sp
The setup status is one of the following:
.PP
pending
.RS 4
\fBsystemd-udevd\fR(8)
is still processing the link, we don\*(Aqt yet know if we will manage it\&.
.sp
Added in version 240\&.
.RE
.PP
initialized
.RS 4
\fBsystemd-udevd\fR(8)
has processed the link, but we don\*(Aqt yet know if we will manage it\&.
.sp
Added in version 251\&.
.RE
.PP
configuring
.RS 4
Configuration for the link is being retrieved or the link is being configured\&.
.sp
Added in version 240\&.
.RE
.PP
configured
.RS 4
Link has been configured successfully\&.
.sp
Added in version 240\&.
.RE
.PP
unmanaged
.RS 4
\fBsystemd\-networkd\fR
is not handling the link\&.
.sp
Added in version 240\&.
.RE
.PP
failed
.RS 4
\fBsystemd\-networkd\fR
failed to configure the link\&.
.sp
Added in version 240\&.
.RE
.PP
linger
.RS 4
The link is gone, but has not yet been dropped by
\fBsystemd\-networkd\fR\&.
.sp
Added in version 240\&.
.RE
.sp
Added in version 219\&.
.RE
.PP
\fBstatus\fR [\fIPATTERN\&...\fR]
.RS 4
Show information about the specified links: type, state, kernel module driver, hardware and IP address, configured DNS servers, etc\&. If one or more
\fIPATTERN\fRs are specified, only links matching one of them are shown\&.
.sp
When no links are specified, an overall network status is shown\&. Also see the option
\fB\-\-all\fR\&.
.sp
Produces output similar to:
.sp
.if n \{\
.RS 4
.\}
.nf
●        State: routable
  Online state: online
       Address: 10\&.193\&.76\&.5 on eth0
                192\&.168\&.122\&.1 on virbr0
                169\&.254\&.190\&.105 on eth0
                fe80::5054:aa:bbbb:cccc on eth0
       Gateway: 10\&.193\&.11\&.1 (CISCO SYSTEMS, INC\&.) on eth0
           DNS: 8\&.8\&.8\&.8
                8\&.8\&.4\&.4
.fi
.if n \{\
.RE
.\}
.sp
In the overall network status, the online state depends on the individual online state of all required links\&. Managed links are required for online by default\&. In this case, the online state is one of the following:
.PP
unknown
.RS 4
All links have unknown online status (i\&.e\&. there are no required links)\&.
.sp
Added in version 249\&.
.RE
.PP
offline
.RS 4
All required links are offline\&.
.sp
Added in version 249\&.
.RE
.PP
partial
.RS 4
Some, but not all, required links are online\&.
.sp
Added in version 249\&.
.RE
.PP
online
.RS 4
All required links are online\&.
.sp
Added in version 249\&.
.RE
.sp
Added in version 219\&.
.RE
.PP
\fBlldp\fR [\fIPATTERN\&...\fR]
.RS 4
Show discovered LLDP (Link Layer Discovery Protocol) neighbors\&. If one or more
\fIPATTERN\fRs are specified only neighbors on those interfaces are shown\&. Otherwise shows discovered neighbors on all interfaces\&. Note that for this feature to work,
\fILLDP=\fR
must be turned on for the specific interface, see
\fBsystemd.network\fR(5)
for details\&.
.sp
Produces output similar to:
.sp
.if n \{\
.RS 4
.\}
.nf
LINK    SYSTEM\-NAME SYSTEM\-DESCRIPTION CHASSIS\-ID        PORT\-ID PORT\-DESCRIPTION CAPS
enp0s25 GS1900      \-                  00:e0:4c:00:00:00 2       Port #2           \&.\&.b\&.\&.\&.\&.\&.\&.\&.\&.

Capability Flags:
o \- Other; p \- Repeater;  b \- Bridge; w \- WLAN Access Point; r \- Router;
t \- Telephone; d \- DOCSIS cable device; a \- Station; c \- Customer VLAN;
s \- Service VLAN, m \- Two\-port MAC Relay (TPMR)

1 neighbor(s) listed\&.
.fi
.if n \{\
.RE
.\}
.sp
Added in version 219\&.
.RE
.PP
\fBlabel\fR
.RS 4
Show numerical address labels that can be used for address selection\&. This is the same information that
\fBip-addrlabel\fR(8)
shows\&. See
\m[blue]\fBRFC 3484\fR\m[]\&\s-2\u[1]\d\s+2
for a discussion of address labels\&.
.sp
Produces output similar to:
.sp
.if n \{\
.RS 4
.\}
.nf
Prefix/Prefixlen                          Label
        ::/0                                  1
    fc00::/7                                  5
    fec0::/10                                11
    2002::/16                                 2
    3ffe::/16                                12
 2001:10::/28                                 7
    2001::/32                                 6
::ffff:0\&.0\&.0\&.0/96                             4
        ::/96                                 3
       ::1/128                                0
.fi
.if n \{\
.RE
.\}
.sp
Added in version 234\&.
.RE
.PP
\fBdelete\fR \fIDEVICE\&...\fR
.RS 4
Deletes virtual netdevs\&. Takes interface name or index number\&.
.sp
Added in version 243\&.
.RE
.PP
\fBup\fR \fIDEVICE\&...\fR
.RS 4
Bring devices up\&. Takes interface name or index number\&.
.sp
Added in version 246\&.
.RE
.PP
\fBdown\fR \fIDEVICE\&...\fR
.RS 4
Bring devices down\&. Takes interface name or index number\&.
.sp
Added in version 246\&.
.RE
.PP
\fBrenew\fR \fIDEVICE\&...\fR
.RS 4
Renew dynamic configurations e\&.g\&. addresses received from DHCP server\&. Takes interface name or index number\&.
.sp
Added in version 244\&.
.RE
.PP
\fBforcerenew\fR \fIDEVICE\&...\fR
.RS 4
Send a FORCERENEW message to all connected clients, triggering DHCP reconfiguration\&. Takes interface name or index number\&.
.sp
Added in version 246\&.
.RE
.PP
\fBreconfigure\fR \fIDEVICE\&...\fR
.RS 4
Reconfigure network interfaces\&. Takes interface name or index number\&. Note that this does not reload
\&.netdev
or
\&.network
corresponding to the specified interface\&. So, if you edit config files, it is necessary to call
\fBnetworkctl reload\fR
first to apply new settings\&.
.sp
Added in version 244\&.
.RE
.PP
\fBreload\fR
.RS 4
Reload
\&.netdev
and
\&.network
files\&. If a new
\&.netdev
file is found, then the corresponding netdev is created\&. Note that even if an existing
\&.netdev
is modified or removed,
\fBsystemd\-networkd\fR
does not update or remove the netdev\&. If a new, modified or removed
\&.network
file is found, then all interfaces which match the file are reconfigured\&.
.sp
Added in version 244\&.
.RE
.PP
\fBedit\fR \fIFILE\fR|\fI@DEVICE\fR\&...
.RS 4
Edit network configuration files, which include
\&.network,
\&.netdev, and
\&.link
files\&. If no network config file matching the given name is found, a new one will be created under
/etc/
or
/run/, depending on whether
\fB\-\-runtime\fR
is specified\&. Specially, if the name is prefixed by
"@", it will be treated as a network interface, and editing will be performed on the network config files associated with it\&. Additionally, the interface name can be suffixed with
":network"
(default) or
":link", in order to choose the type of network config to operate on\&.
.sp
If
\fB\-\-drop\-in=\fR
is specified, edit the drop\-in file instead of the main configuration file\&. Unless
\fB\-\-no\-reload\fR
is specified,
\fBsystemd\-networkd\fR
will be reloaded after the edit of the
\&.network
or
\&.netdev
files finishes\&. The same applies for
\&.link
files and
\fBsystemd-udevd\fR(8)\&. Note that the changed link settings are not automatically applied after reloading\&. To achieve that, trigger uevents for the corresponding interface\&. Refer to
\fBsystemd.link\fR(5)
for more information\&.
.sp
Added in version 254\&.
.RE
.PP
\fBcat\fR [\fIFILE\fR|\fI@DEVICE\fR\&...]
.RS 4
Show network configuration files\&. This command honors the
"@"
prefix in the same way as
\fBedit\fR\&. When no argument is specified,
\fBnetworkd.conf\fR(5)
and its drop\-in files will be shown\&.
.sp
Added in version 254\&.
.RE
.PP
\fBmask\fR \fIFILE\fR\&...
.RS 4
Mask network configuration files, which include
\&.network,
\&.netdev, and
\&.link
files\&. A symlink of the given name will be created under
/etc/
or
/run/, depending on whether
\fB\-\-runtime\fR
is specified, that points to
/dev/null\&. If a non\-empty config file with the specified name exists under the target directory or a directory with higher priority (e\&.g\&.
\fB\-\-runtime\fR
is used while an existing config resides in
/etc/), the operation is aborted\&.
.sp
This command honors
\fB\-\-no\-reload\fR
in the same way as
\fBedit\fR\&.
.sp
Added in version 256\&.
.RE
.PP
\fBunmask\fR \fIFILE\fR\&...
.RS 4
Unmask network configuration files, i\&.e\&. reverting the effect of
\fBmask\fR\&. Note that this command operates regardless of the scope of the directory, i\&.e\&.
\fB\-\-runtime\fR
is of no effect\&.
.sp
This command honors
\fB\-\-no\-reload\fR
in the same way as
\fBedit\fR
and
\fBmask\fR\&.
.sp
Added in version 256\&.
.RE
.PP
\fBpersistent\-storage\fR \fIBOOL\fR
.RS 4
Notify
systemd\-networkd\&.service
that the persistent storage for the service is ready\&. This is called by
systemd\-networkd\-persistent\-storage\&.service\&. Usually, this command should not be called manually by users or administrators\&.
.sp
Added in version 256\&.
.RE
.SH "OPTIONS"
.PP
The following options are understood:
.PP
\fB\-a\fR \fB\-\-all\fR
.RS 4
Show all links with
\fBstatus\fR\&.
.sp
Added in version 219\&.
.RE
.PP
\fB\-s\fR \fB\-\-stats\fR
.RS 4
Show link statistics with
\fBstatus\fR\&.
.sp
Added in version 243\&.
.RE
.PP
\fB\-l\fR, \fB\-\-full\fR
.RS 4
Do not ellipsize the output\&.
.sp
Added in version 245\&.
.RE
.PP
\fB\-n\fR, \fB\-\-lines=\fR
.RS 4
When used with
\fBstatus\fR, controls the number of journal lines to show, counting from the most recent ones\&. Takes a positive integer argument\&. Defaults to 10\&.
.sp
Added in version 245\&.
.RE
.PP
\fB\-\-drop\-in=\fR\fB\fINAME\fR\fR
.RS 4
When used with
\fBedit\fR, edit the drop\-in file
\fINAME\fR
instead of the main configuration file\&.
.sp
Added in version 254\&.
.RE
.PP
\fB\-\-no\-reload\fR
.RS 4
When used with
\fBedit\fR,
\fBmask\fR, or
\fBunmask\fR,
\fBsystemd-networkd.service\fR(8)
or
\fBsystemd-udevd.service\fR(8)
will not be reloaded after the operation finishes\&.
.sp
Added in version 254\&.
.RE
.PP
\fB\-\-runtime\fR
.RS 4
When used with
\fBedit\fR
or
\fBmask\fR, operate on the file under
/run/
instead of
/etc/\&.
.sp
Added in version 256\&.
.RE
.PP
\fB\-\-json=\fR\fB\fIMODE\fR\fR
.RS 4
Shows output formatted as JSON\&. Expects one of
"short"
(for the shortest possible output without any redundant whitespace or line breaks),
"pretty"
(for a pretty version of the same, with indentation and line breaks) or
"off"
(to turn off JSON output, the default)\&.
.RE
.PP
\fB\-h\fR, \fB\-\-help\fR
.RS 4
Print a short help text and exit\&.
.RE
.PP
\fB\-\-version\fR
.RS 4
Print a short version string and exit\&.
.RE
.PP
\fB\-\-no\-legend\fR
.RS 4
Do not print the legend, i\&.e\&. column headers and the footer with hints\&.
.RE
.PP
\fB\-\-no\-pager\fR
.RS 4
Do not pipe output into a pager\&.
.RE
.SH "EXIT STATUS"
.PP
On success, 0 is returned, a non\-zero failure code otherwise\&.
.SH "SEE ALSO"
.PP
\fBsystemd-networkd.service\fR(8), \fBsystemd.network\fR(5), \fBsystemd.netdev\fR(5), \fBip\fR(8)
.SH "NOTES"
.IP " 1." 4
RFC 3484
.RS 4
\%https://tools.ietf.org/html/rfc3484
.RE