MASTERGUARD(8)                    NUT Manual                    MASTERGUARD(8)

NAME
       masterguard - Driver for Masterguard UPS equipment

NOTE
       This man page only documents the hardware-specific features of the
       masterguard driver. For information about the core driver, see
       nutupsdrv(8).

NOTE
       Please note that this driver is deprecated and will not receive new
       development. If it works for managing your devices -- fine, but if you
       are running it to try setting up a new device, please consider the
       newer nutdrv_qx(8) instead, which should handle all Q* protocol
       variants for NUT.

       Please do also report if your device works with this driver, but
       nutdrv_qx(8) would not actually support it with any subdriver!

SUPPORTED HARDWARE
       This driver supports Masterguard UPS equipment (serial connection
       only).

EXTRA ARGUMENTS
       CS
           Cancel the shutdown procedure.

AUTHOR
       Michael Spanier <mail@michael-spanier.de>

SEE ALSO
   Newer driver:
       nutdrv_qx(8)

   The core driver:
       nutupsdrv(8)

   Internet resources:
       The NUT (Network UPS Tools) home page: https://www.networkupstools.org/

Network UPS Tools 2.8.1           04/06/2024                    MASTERGUARD(8)