ISCSI-INQ(1)             iscsi-inq: Perform INQUIRY on            ISCSI-INQ(1)

NAME
       iscsi-inq - Utility to request INQUIRY data from an iSCSI LUN

SYNOPSIS
       iscsi-inq [ OPTIONS ] <ISCSI-URL>

       iscsi-inq [-i --initiator-name=<IQN>] [-e --evpd=<INTEGER>]
                 [-c --pagecode=<INTEGER>] [-d --debug=<INTEGER>] [-? --help]
                 [--usage] [<ISCSI-URL>]

DESCRIPTION
       iscsi-inq is a utility to request INQUIRY data from an iSCSI LUN.

ISCSI URL FORMAT
       iSCSI URL format is
       'iscsi://[<username>[%<password>]@]<host>[:<port>]/<target-iqn-name>/<lun>'

       Username and password are only required if the target requires CHAP
       authentication. Optionally you can specify the username and password
       via the environment variables LIBISCSI_CHAP_USERNAME and
       LIBISCSI_CHAP_PASSWORD.

       Host can be specified either as a hostname, an IPv4 address or an IPv6
       address. Examples:

                iscsi://192.0.2.1/iqn.ronnie.test/1
                iscsi://[2001:DB8::1]:3261/iqn.ronnie.test/1
                iscsi://ronnie%password@iscsi.example.com/iqn.ronnie.test/1


       Port is the TCP port on the target to connect to. Default is 3260.

       Target-iqn-name is the iqn name of the target. An iSCSI portal can have
       multiple targets defined. Use iscsi-ls to list all targets available on
       one specific portal.

       LUN is the LUN number to report the INQUIRY data for.

OPTIONS
       -i --initiator-name=<IQN>
           This specifies the initiator-name that iscsi-inq will use when
           logging in to the target.

           The default name is
           'iqn.2007-10.com.github:sahlberg:libiscsi:iscsi-inq' but you can
           use this argument to override this. This is mainly needed for cases
           where the target is configured with access-control to only allow
           discovery logins from known initiator-names.

       -e --evpd=<INTEGER>
           By default iscsi-inq will display the standard inquiry data.
           Specify evpd as 1 to display extended VPD pages.

       -c --pagecode=<INTEGER>
           This argument specifies which VPD page to display when evpd is
           requested. Default is 0x00 which represents SUPPORTED VPD PAGES.

           This argument can only be used when evpd is set to 1.

       -d --debug=<INTEGER>
           Debug level.

       -? --help
           Display basic help text.

       --usage
           Display basic usage text.

EXAMPLES
       To print the standard INQUIRY page:

                iscsi-inq iscsi://192.0.2.1/iqn.ronnie.test/1


       To list available pages:

                iscsi-inq -e 1 iscsi://192.0.2.1/iqn.ronnie.test/1


       To show a specific page:

                iscsi-inq -e 1 -c 0x80 iscsi://192.0.2.1/iqn.ronnie.test/1



SEE ALSO
       iscsi-ls(1) http://github.com/sahlberg/libiscsi

iscsi-inq                         03/22/2014                      ISCSI-INQ(1)