.\" .\" idmapd.conf(5) .\" .\" COPYRIGHT (c) 2008 .\" The Regents of the University of Michigan .\" ALL RIGHTS RESERVED .\" .\" Permission is granted to use, copy, create derivative works .\" and redistribute this software and such derivative works .\" for any purpose, so long as the name of The University of .\" Michigan is not used in any advertising or publicity .\" pertaining to the use of distribution of this software .\" without specific, written prior authorization. If the .\" above copyright notice or any other identification of the .\" University of Michigan is included in any copy of any .\" portion of this software, then the disclaimer below must .\" also be included. .\" .\" THIS SOFTWARE IS PROVIDED AS IS, WITHOUT REPRESENTATION .\" FROM THE UNIVERSITY OF MICHIGAN AS TO ITS FITNESS FOR ANY .\" PURPOSE, AND WITHOUT WARRANTY BY THE UNIVERSITY OF .\" MICHIGAN OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING .\" WITHOUT LIMITATION THE IMPLIED WARRANTIES OF .\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE .\" REGENTS OF THE UNIVERSITY OF MICHIGAN SHALL NOT BE LIABLE .\" FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR .\" CONSEQUENTIAL DAMAGES, WITH RESPECT TO ANY CLAIM ARISING .\" OUT OF OR IN CONNECTION WITH THE USE OF THE SOFTWARE, EVEN .\" IF IT HAS BEEN OR IS HEREAFTER ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGES. .\" .TH idmapd.conf 5 "19 Nov 2008" .SH NAME idmapd.conf \- configuration file for libnfsidmap .SH SYNOPSIS Configuration file for libnfsidmap. Used by idmapd and svcgssd to map NFSv4 name to and from ids. .SH DESCRIPTION The .B idmapd.conf configuration files consists of several sections, initiated by strings of the form [General] and [Mapping]. Each section may contain lines of the form .nf variable = value .fi The recognized sections and their recognized variables are as follows: .\" .\" ------------------------------------------------------------------- .\" The [General] section .\" ------------------------------------------------------------------- .\" .SS "[General] section variables" .nf .fi .TP .B Verbosity Verbosity level of debugging (Default: 0) .TP .B Domain The local NFSv4 domain name. An NFSv4 domain is a namespace with a unique username<->UID and groupname<->GID mapping. (Default: Host's fully-qualified DNS domain name) .TP .B No-Strip In multi-domain environments, some NFS servers will append the identity management domain to the owner and owner_group in lieu of a true NFSv4 domain. This option can facilitate lookups in such environments. If set to a value other than "none", the nsswitch plugin will first pass the name to the password/group lookup function without stripping the domain off. If that mapping fails then the plugin will try again using the old method (comparing the domain in the string to the Domain value, stripping it if it matches, and passing the resulting short name to the lookup function). Valid values are "user", "group", "both", and "none". (Default: "none") .TP .B Reformat-Group Winbind has a quirk whereby doing a group lookup in UPN format (e.g. staff@americas.example.com) will cause the group to be displayed prefixed with the full domain in uppercase (e.g. AMERICAS.EXAMPLE.COM\\staff) instead of in the familiar netbios name format (e.g. AMERICAS\\staff). Setting this option to true causes the name to be reformatted before passing it to the group lookup function in order to work around this. This setting is ignored unless No-Strip is set to either "both" or "group". (Default: "false") .TP .B Local-Realms A comma-separated list of Kerberos realm names that may be considered equivalent to the local realm name. For example, users juser@ORDER.EDU and juser@MAIL.ORDER.EDU may be considered to be the same user in the specified .B Domain. (Default: the host's default realm name) .br .B Note: If a value is specified here, the default local realm must be included as well. .\" .\" ------------------------------------------------------------------- .\" The [Mapping] section .\" ------------------------------------------------------------------- .\" .SS "[Mapping] section variables" .nf .fi .TP .B Nobody-User Local user name to be used when a mapping cannot be completed. .TP .B Nobody-Group Local group name to be used when a mapping cannot be completed. .\" .\" ------------------------------------------------------------------- .\" The [Translation] section .\" ------------------------------------------------------------------- .\" .SS "[Translation] section variables" .nf .fi .TP .B Method A comma-separated, ordered list of mapping methods (plug-ins) to use when mapping between NFSv4 names and local IDs. Each specified method is tried in order until a mapping is found, or there are no more methods to try. The methods included in the default distribution include "nsswitch", "umich_ldap", and "static". (Default: nsswitch) .TP .B GSS-Methods An optional comma-separated, ordered list of mapping methods (plug-ins) to use when mapping between GSS Authenticated names and local IDs. (Default: the same list as specified for .B Method) .\" .\" ------------------------------------------------------------------- .\" The [Static] section .\" ------------------------------------------------------------------- .\" .SS "[Static] section variables" .nf .fi The "static" translation method uses a static list of GSS-Authenticated names to local user names. Entries in the list are of the form: .nf principal@REALM = localusername .fi .\" .\" ------------------------------------------------------------------- .\" The [REGEX] section .\" ------------------------------------------------------------------- .\" .SS "[REGEX] section variables" .nf .fi If the "regex" translation method is specified, the following variables within the [REGEX] section are used to map between NFS4 names and local IDs. .TP .B User-Regex Case-insensitive regular expression that extracts the local user name from an NFSv4 name. Multiple expressions may be concatenated with '|'. The first match will be used. There is no default. A basic regular expression for domain DOMAIN.ORG and realm MY.DOMAIN.ORG would be: .nf ^DOMAIN\\([^@]+)@MY.DOMAIN.ORG$ .fi .TP .B Group-Regex Case-insensitive regular expression that extracts the local group name from an NFSv4 name. Multiple expressions may be concatenated with '|'. The first match will be used. There is no default. A basic regular expression for domain DOMAIN.ORG and realm MY.DOMAIN.ORG would be: .nf ^([^@]+)@DOMAIN.ORG@MY.DOMAIN.ORG$|^DOMAIN\\([^@]+)@MY.DOMAIN.ORG$ .fi .TP .B Prepend-Before-User Constant string to put before a local user name when building an NFSv4 name. Usually this is the short domain name followed by '\'. (Default: none) .TP .B Append-After-User Constant string to put after a local user name when building an NFSv4 name. Usually this is '@' followed by the default realm. (Default: none) .TP .B Prepend-Before-Group Constant string to put before a local group name when building an NFSv4 name. Usually not used. (Default: none) .TP .B Append-After-Group Constant string to put before a local group name when building an NFSv4 name. Usually this is '@' followed by the domain name followed by another '@' and the default realm. (Default: none) .TP .B Group-Name-Prefix Constant string that is prepended to a local group name when converting it to an NFSv4 name. If an NFSv4 group name has this prefix it is removed when converting it to a local group name. With this group names of a central directory can be shortened for an isolated organizational unit if all groups have a common prefix. (Default: none) .TP .B Group-Name-No-Prefix-Regex Case-insensitive regular expression to exclude groups from adding and removing the prefix set by .BR Group-Name-Prefix . The regular expression must match both the remote and local group names. Multiple expressions may be concatenated with '|'. (Default: none) .\" .\" ------------------------------------------------------------------- .\" The [UMICH_SCHEMA] section .\" ------------------------------------------------------------------- .\" .SS "[UMICH_SCHEMA] section variables" .nf .fi If the "umich_ldap" translation method is specified, the following variables within the [UMICH_SCHEMA] section are used. .TP .B LDAP_server LDAP server name or address (Required if using UMICH_LDAP) .TP .B LDAP_base Absolute LDAP search base. (Required if using UMICH_LDAP) .TP .B LDAP_people_base Absolute LDAP search base for people accounts. (Default: The .B LDAP_base value) .TP .B LDAP_group_base Absolute LDAP search base for group accounts. (Default: The .B LDAP_base value) .TP .B LDAP_canonicalize_name Whether or not to perform name canonicalization on the name given as .B LDAP_server (Default: "true") .TP .B LDAP_follow_referrals Whether or not to follow ldap referrals. (Default: "true") .TP .B LDAP_use_ssl Set to "true" to enable SSL communication with the LDAP server. (Default: "false") .TP .B LDAP_ca_cert Location of a trusted CA certificate used when SSL is enabled (Required if .B LDAP_use_ssl is true and .B LDAP_tls_reqcert is not set to never) .TP .B LDAP_tls_reqcert Controls the LDAP server certificate validation behavior. It can take the same values as ldap.conf(5)'s .B TLS_REQCERT tunable. (Default: "hard") .TP .B LDAP_timeout_seconds Number of seconds before timing out an LDAP request (Default: 4) .TP .B LDAP_sasl_mech SASL mechanism to be used for sasl authentication. Required if SASL auth is to be used (Default: None) .TP .B LDAP_realm SASL realm to be used for sasl authentication. (Default: None) .TP .B LDAP_sasl_authcid Authentication identity to be used for sasl authentication. (Default: None) .TP .B LDAP_sasl_authzid Authorization identity to be used for sasl authentication. (Default: None) .TP .B LDAP_sasl_secprops Cyrus SASL security properties. It can the same values as ldap.conf(5)'s sasl_secprops. .TP .B LDAP_sasl_canonicalize Specifies whether the LDAP server hostname should be canonicalised. If set to yes LDAP lib with do a reverse hostname lookup. If this is not set the LDAP library's default will be used. (Default: None) .TP .B LDAP_sasl_krb5_ccname Path to kerberos credential cache. If it is not set then the value of environment variable KRB5CCNAME will be used. If the environment variable is not set then the default mechanism of kerberos library will be used. .TP .B NFSv4_person_objectclass The object class name for people accounts in your local LDAP schema (Default: NFSv4RemotePerson) .TP .B NFSv4_name_attr Your local schema's attribute name to be used for NFSv4 user names (Default: NFSv4Name) .TP .B NFSv4_uid_attr Your local schema's attribute name to be used for uidNumber (Default: uidNumber) .TP .B GSS_principal_attr Your local schema's attribute name for GSSAPI Principal names (Default: GSSAuthName) .TP .B NFSv4_acctname_attr Your local schema's attribute name to be used for account names (Default: uid) .TP .B NFSv4_group_objectclass The object class name for group accounts in your local LDAP schema (Default: NFSv4RemoteGroup) .TP .B NFSv4_gid_attr Your local schema's attribute name to be used for gidNumber (Default: gidNumber) .TP .B NFSv4_group_attr Your local schema's attribute name to be used for NFSv4 group names (Default: NFSv4Name) .TP .B LDAP_use_memberof_for_groups Some LDAP servers do a better job with indexing where searching through all the groups searching for the user in the memberuid list. Others like SunOne directory that search can takes minutes if there are thousands of groups. So setting .B LDAP_use_memberof_for_groups to true in the configuration file will use the memberof lists of the account and search through only those groups to obtain gids. (Default: false) .TP .B NFSv4_member_attr If .B LDAP_use_memberof_for_groups is true, this is the attribute to be searched for. (Default: memberUid) .TP .B NFSv4_grouplist_filter An optional search filter for determining group membership. (No Default) .\" .\" ------------------------------------------------------------------- .\" An Example .\" ------------------------------------------------------------------- .\" .SH EXAMPLES An example .I /etc/idmapd.conf file: .nf [General] Verbosity = 0 Domain = domain.org Local-Realms = DOMAIN.ORG,MY.DOMAIN.ORG,YOUR.DOMAIN.ORG [Mapping] Nobody-User = nfsnobody Nobody-Group = nfsnobody [Translation] Method = umich_ldap,regex,nsswitch GSS-Methods = umich_ldap,regex,static [Static] johndoe@OTHER.DOMAIN.ORG = johnny [Regex] User-Regex = ^DOMAIN\\([^@]+)@DOMAIN.ORG$ Group-Regex = ^([^@]+)@DOMAIN.ORG@DOMAIN.ORG$|^DOMAIN\\([^@]+)@DOMAIN.ORG$ Prepend-Before-User = DOMAIN\ Append-After-User = @DOMAIN.ORG Append-After-Group = @domain.org@domain.org Group-Name-Prefix = sales- Group-Name-No-Prefix-Regex = -personal-group$ [UMICH_SCHEMA] LDAP_server = ldap.domain.org LDAP_base = dc=org,dc=domain .fi .\" .\" ------------------------------------------------------------------- .\" Additional sections .\" ------------------------------------------------------------------- .\" .SH FILES .I /usr/etc/idmapd.conf .br .I /usr/etc/idmapd.conf.d/*.conf .br .I /etc/idmapd.conf .br .I /etc/idmapd.conf.d/*.conf .br .IP Files are read in the order listed. Later settings override earlier settings. .SH SEE ALSO .BR idmapd (8) .BR svcgssd (8) .\".SH COMPATIBILITY .\".SH STANDARDS .\".SH ACKNOWLEDGEMENTS .\".SH AUTHORS .\".SH HISTORY .SH BUGS Report bugs to .\".SH CAVEATS