IBSYSSTAT(8)                  Open IB Diagnostics                 IBSYSSTAT(8)

NAME
       ibsysstat - system status on an InfiniBand address

SYNOPSIS
       ibsysstat [options] <dest lid | guid> [<op>]

DESCRIPTION
       ibsysstat uses vendor mads to validate connectivity between IB nodes
       and obtain other information about the IB node. ibsysstat is run as
       client/server. Default is to run as client.

OPTIONS
       Current supported operations:

          ping \- verify connectivity to server (default)
          host \- obtain host information from server
          cpu  \- obtain cpu information from server

       -o, --oui
              use specified OUI number to multiplex vendor mads

       -S, --Server
              start in server mode (do not return)

   Addressing Flags
       -G, --Guid     The address specified is a Port GUID

       -L, --Lid   The address specified is a LID

       -s, --sm_port <smlid>     use 'smlid' as the target lid for SA queries.

   Port Selection flags
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

   Local port Selection
       Multiple port/Multiple CA support: when no IB device or port is
       specified (see the "local umad parameters" below), the libibumad
       library selects the port to use by the following criteria:

          1. the first port that is ACTIVE.

          2. if not found, the first port that is UP (physical link up).

          If a port and/or CA name is specified, the libibumad library
          attempts to fulfill the user request, and will fail if it is not
          possible.

          For example:

             ibaddr                 # use the first port (criteria #1 above)
             ibaddr -C mthca1       # pick the best port from "mthca1" only.
             ibaddr -P 2            # use the second (active/up) port from the first available IB device.
             ibaddr -C mthca0 -P 2  # use the specified port only.

   Debugging flags

       -d     raise the IB debugging level.  May be used several times (-ddd
              or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h, --help      show the usage message

       -v, --verbose
              increase the application verbosity level.  May be used several
              times (-vv or -v -v -v)

       -V, --version     show the version info.

   Configuration flags
       -t, --timeout <timeout_ms> override the default timeout for the
       solicited mads.

       --config, -z  <config_file> Specify alternate config file.
          Default: /etc/infiniband-diags/ibdiag.conf

FILES
   CONFIG FILE
       /etc/infiniband-diags/ibdiag.conf

       A global config file is provided to set some of the common options for
       all tools.  See supplied config file for details.

AUTHOR

       Hal Rosenstock
              < halr@voltaire.com >

                                  2017-08-21                      IBSYSSTAT(8)