hostnamectl - Control the system hostname
hostnamectl [OPTIONS...] {COMMAND}
hostnamectl may be used to query and change the system
hostname and related settings.
systemd-hostnamed.service(8) and this tool distinguish
three different hostnames: the high-level "pretty" hostname which
might include all kinds of special characters (e.g. "Lennart's
Laptop"), the "static" hostname which is the user-configured
hostname (e.g. "lennarts-laptop"), and the transient hostname
which is a fallback value received from network configuration (e.g.
"node12345678"). If a static hostname is set to a valid value,
then the transient hostname is not used.
Note that the pretty hostname has little restrictions on the
characters and length used, while the static and transient hostnames are
limited to the usually accepted characters of Internet domain names, and 64
characters at maximum (the latter being a Linux limitation).
Use systemd-firstboot(1) to initialize the system hostname
for mounted (but not booted) system images.
The following commands are understood:
status
Show system hostname and related information. If no
command is specified, this is the implied default.
Added in version 195.
hostname [NAME]
If no argument is given, print the system hostname. If an
optional argument
NAME is provided then the command changes the system
hostname to
NAME. By default, this will alter the pretty, the static,
and the transient hostname alike; however, if one or more of
--static,
--transient,
--pretty are used, only the selected hostnames are
changed. If the pretty hostname is being set, and static or transient are
being set as well, the specified hostname will be simplified in regards to the
character set used before the latter are updated. This is done by removing
special characters and spaces. This ensures that the pretty and the static
hostname are always closely related while still following the validity rules
of the specific name. This simplification of the hostname string is not done
if only the transient and/or static hostnames are set, and the pretty hostname
is left untouched.
The static and transient hostnames must each be either a single
DNS label (a string composed of 7-bit ASCII lower-case characters and no
spaces or dots, limited to the format allowed for DNS domain name labels),
or a sequence of such labels separated by single dots that forms a valid DNS
FQDN. The hostname must be at most 64 characters, which is a Linux
limitation (DNS allows longer names).
Added in version 249.
icon-name [NAME]
If no argument is given, print the icon name of the
system. If an optional argument
NAME is provided then the command
changes the icon name to
NAME. The icon name is used by some graphical
applications to visualize this host. The icon name should follow the
Icon
Naming Specification[1].
Added in version 249.
chassis [TYPE]
If no argument is given, print the chassis type. If an
optional argument
TYPE is provided then the command changes the chassis
type to
TYPE. The chassis type is used by some graphical applications
to visualize the host or alter user interaction. Currently, the following
chassis types are defined: "desktop", "laptop",
"convertible", "server", "tablet",
"handset", "watch", "embedded", as well as the
special chassis types "vm" and "container" for virtualized
systems that lack an immediate physical chassis.
Added in version 249.
deployment [ENVIRONMENT]
If no argument is given, print the deployment
environment. If an optional argument
ENVIRONMENT is provided then the
command changes the deployment environment to
ENVIRONMENT. Argument
ENVIRONMENT must be a single word without any control characters. One
of the following is suggested: "development",
"integration", "staging", "production".
Added in version 249.
location [LOCATION]
If no argument is given, print the location string for
the system. If an optional argument
LOCATION is provided then the
command changes the location string for the system to
LOCATION.
Argument
LOCATION should be a human-friendly, free-form string
describing the physical location of the system, if it is known and applicable.
This may be as generic as "Berlin, Germany" or as specific as
"Left Rack, 2nd Shelf".
Added in version 249.
The following options are understood:
--static, --transient, --pretty
If
status is invoked (or no explicit command is
given) and one of these switches is specified,
hostnamectl will print
out just this selected hostname.
If used with hostname, only the selected hostnames will be
updated. When more than one of these switches are specified, all the
specified hostnames will be updated.
Added in version 195.
-H, --host=
Execute the operation remotely. Specify a hostname, or a
username and hostname separated by "@", to connect to. The hostname
may optionally be suffixed by a port ssh is listening on, separated by
":", and then a container name, separated by "/", which
connects directly to a specific container on the specified host. This will use
SSH to talk to the remote machine manager instance. Container names may be
enumerated with machinectl -H HOST. Put IPv6 addresses in
brackets.
-M, --machine=
Execute operation on a local container. Specify a
container name to connect to, optionally prefixed by a user name to connect as
and a separating "@" character. If the special string
".host" is used in place of the container name, a connection to the
local system is made (which is useful to connect to a specific user's user
bus: "--user --machine=lennart@.host"). If the "@" syntax
is not used, the connection is made as root user. If the "@" syntax
is used either the left hand side or the right hand side may be omitted (but
not both) in which case the local user name and ".host" are
implied.
--no-ask-password
Do not query the user for authentication for privileged
operations.
-h, --help
Print a short help text and exit.
--version
Print a short version string and exit.
--json=MODE
Shows output formatted as JSON. Expects one of
"short" (for the shortest possible output without any redundant
whitespace or line breaks), "pretty" (for a pretty version of the
same, with indentation and line breaks) or "off" (to turn off JSON
output, the default).
-j
Equivalent to --json=pretty if running on a
terminal, and --json=short otherwise.
On success, 0 is returned, a non-zero failure code otherwise.
- 1.
- Icon Naming Specification