git worktree add [-f] [--detach] [--checkout] [--lock] [-b <new-branch>] <path> [<commit-ish>] git worktree list [--porcelain] git worktree lock [--reason <string>] <worktree> git worktree move <worktree> <new-path> git worktree prune [-n] [-v] [--expire <expire>] git worktree remove [-f] <worktree> git worktree repair [<path>...] git worktree unlock <worktree>
A git repository can support multiple working trees, allowing you to check out more than one branch at a time. With git worktree add a new working tree is associated with the repository. This new working tree is called a "linked working tree" as opposed to the "main working tree" prepared by git-init(1) or git-clone(1). A repository has one main working tree (if it’s not a bare repository) and zero or more linked working trees. When you are done with a linked working tree, remove it with git worktree remove.
In its simplest form, git worktree add <path> automatically creates a new branch whose name is the final component of <path>, which is convenient if you plan to work on a new topic. For instance, git worktree add ../hotfix creates new branch hotfix and checks it out at path ../hotfix. To instead work on an existing branch in a new working tree, use git worktree add <path> <branch>. On the other hand, if you just plan to make some experimental changes or do testing without disturbing existing development, it is often convenient to create a throwaway working tree not associated with any branch. For instance, git worktree add -d <path> creates a new working tree with a detached HEAD at the same commit as the current branch.
If a working tree is deleted without using git worktree remove, then its associated administrative files, which reside in the repository (see "DETAILS" below), will eventually be removed automatically (see gc.worktreePruneExpire in git-config(1)), or you can run git worktree prune in the main or any linked working tree to clean up any stale administrative files.
If a linked working tree is stored on a portable device or network share which is not always mounted, you can prevent its administrative files from being pruned by issuing the git worktree lock command, optionally specifying --reason to explain why the working tree is locked.
If <commit-ish> is a branch name (call it <branch>) and is not found, and neither -b nor -B nor --detach are used, but there does exist a tracking branch in exactly one remote (call it <remote>) with a matching name, treat as equivalent to:
$ git worktree add --track -b <branch> <path> <remote>/<branch>
If the branch exists in multiple remotes and one of them is named by the checkout.defaultRemote configuration variable, we’ll use that one for the purposes of disambiguation, even if the <branch> isn’t unique across all remotes. Set it to e.g. checkout.defaultRemote=origin to always checkout remote branches from there if <branch> is ambiguous but exists on the origin remote. See also checkout.defaultRemote in git-config(1).
If <commit-ish> is omitted and neither -b nor -B nor --detach used, then, as a convenience, the new working tree is associated with a branch (call it <branch>) named after $(basename <path>). If <branch> doesn’t exist, a new branch based on HEAD is automatically created as if -b <branch> was given. If <branch> does exist, it will be checked out in the new working tree, if it’s not checked out anywhere else, otherwise the command will refuse to create the working tree (unless --force is used).
For instance, if the main working tree (or bare repository) is moved, linked working trees will be unable to locate it. Running repair in the main working tree will reestablish the connection from linked working trees back to the main working tree.
Similarly, if a linked working tree is moved without using git worktree move, the main working tree (or bare repository) will be unable to locate it. Running repair within the recently-moved working tree will reestablish the connection. If multiple linked working trees are moved, running repair from any working tree with each tree’s new <path> as an argument, will reestablish the connection to all the specified paths.
If both the main working tree and linked working trees have been moved manually, then running repair in the main working tree and specifying the new <path> of each linked working tree will reestablish all connections in both directions.
move refuses to move a locked working tree unless --force is specified twice. If the destination is already assigned to some other working tree but is missing (for instance, if <new-path> was deleted manually), then --force allows the move to proceed; use --force twice if the destination is locked.
remove refuses to remove an unclean working tree unless --force is used. To remove a locked working tree, specify --force twice.
-b <new-branch>, -B <new-branch>
This can also be set up as the default behaviour by using the worktree.guessRemote config option.
With list, output additional information about worktrees (see below).
With list, annotate missing working trees as prunable if they are older than <time>.
If the last path components in the working tree’s path is unique among working trees, it can be used to identify a working tree. For example if you only have two working trees, at /abc/def/ghi and /abc/def/ggg, then ghi or def/ghi is enough to point to the former working tree.
In general, all pseudo refs are per working tree and all refs starting with refs/ are shared. Pseudo refs are ones like HEAD which are directly under $GIT_DIR instead of inside $GIT_DIR/refs. There are exceptions, however: refs inside refs/bisect and refs/worktree are not shared.
Refs that are per working tree can still be accessed from another working tree via two special paths, main-worktree and worktrees. The former gives access to per-working tree refs of the main working tree, while the latter to all linked working trees.
For example, main-worktree/HEAD or main-worktree/refs/bisect/good resolve to the same value as the main working tree’s HEAD and refs/bisect/good respectively. Similarly, worktrees/foo/HEAD or worktrees/bar/refs/bisect/bad are the same as $GIT_COMMON_DIR/worktrees/foo/HEAD and $GIT_COMMON_DIR/worktrees/bar/refs/bisect/bad.
In order to have configuration specific to working trees, you can turn on the worktreeConfig extension, e.g.:
$ git config extensions.worktreeConfig true
In this mode, specific configuration stays in the path pointed by git rev-parse --git-path config.worktree. You can add or update configuration in this file with git config --worktree. Older Git versions will refuse to access repositories with this extension.
Note that in this file, the exception for core.bare and core.worktree is gone. If they exist in $GIT_DIR/config, you must move them to the config.worktree of the main working tree. You may also take this opportunity to review and move other configuration that you do not want to share to all working trees:
Within a linked working tree, $GIT_DIR is set to point to this private directory (e.g. /path/main/.git/worktrees/test-next in the example) and $GIT_COMMON_DIR is set to point back to the main working tree’s $GIT_DIR (e.g. /path/main/.git). These settings are made in a .git file located at the top directory of the linked working tree.
Path resolution via git rev-parse --git-path uses either $GIT_DIR or $GIT_COMMON_DIR depending on the path. For example, in the linked working tree git rev-parse --git-path HEAD returns /path/main/.git/worktrees/test-next/HEAD (not /path/other/test-next/.git/HEAD or /path/main/.git/HEAD) while git rev-parse --git-path refs/heads/master uses $GIT_COMMON_DIR and returns /path/main/.git/refs/heads/master, since refs are shared across all working trees, except refs/bisect and refs/worktree.
See gitrepository-layout(5) for more information. The rule of thumb is do not make any assumption about whether a path belongs to $GIT_DIR or $GIT_COMMON_DIR when you need to directly access something inside $GIT_DIR. Use git rev-parse --git-path to get the final path.
If you manually move a linked working tree, you need to update the gitdir file in the entry’s directory. For example, if a linked working tree is moved to /newpath/test-next and its .git file points to /path/main/.git/worktrees/test-next, then update /path/main/.git/worktrees/test-next/gitdir to reference /newpath/test-next instead. Better yet, run git worktree repair to reestablish the connection automatically.
To prevent a $GIT_DIR/worktrees entry from being pruned (which can be useful in some situations, such as when the entry’s working tree is stored on a portable device), use the git worktree lock command, which adds a file named locked to the entry’s directory. The file contains the reason in plain text. For example, if a linked working tree’s .git file points to /path/main/.git/worktrees/test-next then a file named /path/main/.git/worktrees/test-next/locked will prevent the test-next entry from being pruned. See gitrepository-layout(5) for details.
When extensions.worktreeConfig is enabled, the config file .git/worktrees/<id>/config.worktree is read after .git/config is.
$ git worktree list /path/to/bare-source (bare) /path/to/linked-worktree abcd1234 [master] /path/to/other-linked-worktree 1234abc (detached HEAD)
The command also shows annotations for each working tree, according to its state. These annotations are:
$ git worktree list /path/to/linked-worktree abcd1234 [master] /path/to/locked-worktreee acbd5678 (brancha) locked /path/to/prunable-worktree 5678abc (detached HEAD) prunable
For these annotations, a reason might also be available and this can be seen using the verbose mode. The annotation is then moved to the next line indented followed by the additional information.
$ git worktree list --verbose /path/to/linked-worktree abcd1234 [master] /path/to/locked-worktree-no-reason abcd5678 (detached HEAD) locked /path/to/locked-worktree-with-reason 1234abcd (brancha) locked: working tree path is mounted on a portable device /path/to/prunable-worktree 5678abc1 (detached HEAD) prunable: gitdir file points to non-existent location
Note that the annotation is moved to the next line if the additional information is available, otherwise it stays on the same line as the working tree itself.
$ git worktree list --porcelain worktree /path/to/bare-source bare worktree /path/to/linked-worktree HEAD abcd1234abcd1234abcd1234abcd1234abcd1234 branch refs/heads/master worktree /path/to/other-linked-worktree HEAD 1234abc1234abc1234abc1234abc1234abc1234a detached worktree /path/to/linked-worktree-locked-no-reason HEAD 5678abc5678abc5678abc5678abc5678abc5678c branch refs/heads/locked-no-reason locked worktree /path/to/linked-worktree-locked-with-reason HEAD 3456def3456def3456def3456def3456def3456b branch refs/heads/locked-with-reason locked reason why is locked worktree /path/to/linked-worktree-prunable HEAD 1233def1234def1234def1234def1234def1234b detached prunable gitdir file points to non-existent location
If the lock reason contains "unusual" characters such as newline, they are escaped and the entire reason is quoted as explained for the configuration variable core.quotePath (see git-config(1)). For Example:
$ git worktree list --porcelain ... locked "reason\nwhy is locked" ...
$ git worktree add -b emergency-fix ../temp master $ pushd ../temp # ... hack hack hack ... $ git commit -a -m 'emergency fix for boss' $ popd $ git worktree remove ../temp