.\" SPDX-License-Identifier: MIT
.\"
.Dd December 22, 2023
.Dt GBZ80 7
.Os
.Sh NAME
.Nm gbz80
.Nd CPU opcode reference
.Sh DESCRIPTION
This is the list of opcodes supported by
.Xr rgbasm 1 ,
including a short description, the number of bytes needed to encode them and the number of CPU cycles at 1MHz (or 2MHz in GBC dual speed mode) needed to complete them.
.Pp
Note: All arithmetic/logic operations that use register
.Sy A
as destination can omit the destination as it is assumed to be register
.Sy A
by default.
The following two lines have the same effect:
.Bd -literal -offset indent
OR A,B
OR B
.Ed
.Sh LEGEND
List of abbreviations used in this document.
.Bl -tag -width Ds
.It Ar r8
Any of the 8-bit registers
.Pq Sy A , B , C , D , E , H , L .
.It Ar r16
Any of the general-purpose 16-bit registers
.Pq Sy BC , DE , HL .
.It Ar n8
8-bit integer constant.
.It Ar n16
16-bit integer constant.
.It Ar e8
8-bit offset
.Po Sy -128
to
.Sy 127
.Pc .
.It Ar u3
3-bit unsigned integer constant
.Po Sy 0
to
.Sy 7
.Pc .
.It Ar cc
Condition codes:
.Bl -tag -width Ds -compact
.It Sy Z
Execute if Z is set.
.It Sy NZ
Execute if Z is not set.
.It Sy C
Execute if C is set.
.It Sy NC
Execute if C is not set.
.It Sy ! cc
Negates a condition code.
.El
.It Ar vec
One of the
.Sy RST
vectors
.Po Ad 0x00 , 0x08 , 0x10 , 0x18 , 0x20 , 0x28 , 0x30 ,
and
.Ad 0x38 Pc .
.El
.Sh INSTRUCTION OVERVIEW
.Ss 8-bit Arithmetic and Logic Instructions
.Bl -inset -compact
.It Sx ADC A,r8
.It Sx ADC A,[HL]
.It Sx ADC A,n8
.It Sx ADD A,r8
.It Sx ADD A,[HL]
.It Sx ADD A,n8
.It Sx AND A,r8
.It Sx AND A,[HL]
.It Sx AND A,n8
.It Sx CP A,r8
.It Sx CP A,[HL]
.It Sx CP A,n8
.It Sx DEC r8
.It Sx DEC [HL]
.It Sx INC r8
.It Sx INC [HL]
.It Sx OR A,r8
.It Sx OR A,[HL]
.It Sx OR A,n8
.It Sx SBC A,r8
.It Sx SBC A,[HL]
.It Sx SBC A,n8
.It Sx SUB A,r8
.It Sx SUB A,[HL]
.It Sx SUB A,n8
.It Sx XOR A,r8
.It Sx XOR A,[HL]
.It Sx XOR A,n8
.El
.Ss 16-bit Arithmetic Instructions
.Bl -inset -compact
.It Sx ADD HL,r16
.It Sx DEC r16
.It Sx INC r16
.El
.Ss Bit Operations Instructions
.Bl -inset -compact
.It Sx BIT u3,r8
.It Sx BIT u3,[HL]
.It Sx RES u3,r8
.It Sx RES u3,[HL]
.It Sx SET u3,r8
.It Sx SET u3,[HL]
.It Sx SWAP r8
.It Sx SWAP [HL]
.El
.Ss Bit Shift Instructions
.Bl -inset -compact
.It Sx RL r8
.It Sx RL [HL]
.It Sx RLA
.It Sx RLC r8
.It Sx RLC [HL]
.It Sx RLCA
.It Sx RR r8
.It Sx RR [HL]
.It Sx RRA
.It Sx RRC r8
.It Sx RRC [HL]
.It Sx RRCA
.It Sx SLA r8
.It Sx SLA [HL]
.It Sx SRA r8
.It Sx SRA [HL]
.It Sx SRL r8
.It Sx SRL [HL]
.El
.Ss Load Instructions
.Bl -inset -compact
.It Sx LD r8,r8
.It Sx LD r8,n8
.It Sx LD r16,n16
.It Sx LD [HL],r8
.It Sx LD [HL],n8
.It Sx LD r8,[HL]
.It Sx LD [r16],A
.It Sx LD [n16],A
.It Sx LDH [n16],A
.It Sx LDH [C],A
.It Sx LD A,[r16]
.It Sx LD A,[n16]
.It Sx LDH A,[n16]
.It Sx LDH A,[C]
.It Sx LD [HLI],A
.It Sx LD [HLD],A
.It Sx LD A,[HLI]
.It Sx LD A,[HLD]
.El
.Ss Jumps and Subroutines
.Bl -inset -compact
.It Sx CALL n16
.It Sx CALL cc,n16
.It Sx JP HL
.It Sx JP n16
.It Sx JP cc,n16
.It Sx JR n16
.It Sx JR cc,n16
.It Sx RET cc
.It Sx RET
.It Sx RETI
.It Sx RST vec
.El
.Ss Stack Operations Instructions
.Bl -inset -compact
.It Sx ADD HL,SP
.It Sx ADD SP,e8
.It Sx DEC SP
.It Sx INC SP
.It Sx LD SP,n16
.It Sx LD [n16],SP
.It Sx LD HL,SP+e8
.It Sx LD SP,HL
.It Sx POP AF
.It Sx POP r16
.It Sx PUSH AF
.It Sx PUSH r16
.El
.Ss Miscellaneous Instructions
.Bl -inset -compact
.It Sx CCF
.It Sx CPL
.It Sx DAA
.It Sx DI
.It Sx EI
.It Sx HALT
.It Sx NOP
.It Sx SCF
.It Sx STOP
.El
.Sh INSTRUCTION REFERENCE
.Ss ADC A,r8
Add the value in
.Ar r8
plus the carry flag to
.Sy A .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
Set if overflow from bit 3.
.It Sy C
Set if overflow from bit 7.
.El
.Ss ADC A,[HL]
Add the byte pointed to by
.Sy HL
plus the carry flag to
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: See
.Sx ADC A,r8
.Ss ADC A,n8
Add the value
.Ar n8
plus the carry flag to
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: See
.Sx ADC A,r8
.Ss ADD A,r8
Add the value in
.Ar r8
to
.Sy A .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
Set if overflow from bit 3.
.It Sy C
Set if overflow from bit 7.
.El
.Ss ADD A,[HL]
Add the byte pointed to by
.Sy HL
to
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: See
.Sx ADD A,r8
.Ss ADD A,n8
Add the value
.Ar n8
to
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: See
.Sx ADD A,r8
.Ss ADD HL,r16
Add the value in
.Ar r16
to
.Sy HL .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy N
0
.It Sy H
Set if overflow from bit 11.
.It Sy C
Set if overflow from bit 15.
.El
.Ss ADD HL,SP
Add the value in
.Sy SP
to
.Sy HL .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: See
.Sx ADD HL,r16
.Ss ADD SP,e8
Add the signed value
.Ar e8
to
.Sy SP .
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
0
.It Sy N
0
.It Sy H
Set if overflow from bit 3.
.It Sy C
Set if overflow from bit 7.
.El
.Ss AND A,r8
Bitwise AND between the value in
.Ar r8
and
.Sy A .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
1
.It Sy C
0
.El
.Ss AND A,[HL]
Bitwise AND between the byte pointed to by
.Sy HL
and
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: See
.Sx AND A,r8
.Ss AND A,n8
Bitwise AND between the value in
.Ar n8
and
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: See
.Sx AND A,r8
.Ss BIT u3,r8
Test bit
.Ar u3
in register
.Ar r8 ,
set the zero flag if bit not set.
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if the selected bit is 0.
.It Sy N
0
.It Sy H
1
.El
.Ss BIT u3,[HL]
Test bit
.Ar u3
in the byte pointed by
.Sy HL ,
set the zero flag if bit not set.
.Pp
Cycles: 3
.Pp
Bytes: 2
.Pp
Flags: See
.Sx BIT u3,r8
.Ss CALL n16
Call address
.Ar n16 .
This pushes the address of the instruction after the
.Sy CALL
on the stack, such that
.Sx RET
can pop it later; then, it executes an implicit
.Sx JP n16 .
.Pp
Cycles: 6
.Pp
Bytes: 3
.Pp
Flags: None affected.
.Ss CALL cc,n16
Call address
.Ar n16
if condition
.Ar cc
is met.
.Pp
Cycles: 6 taken / 3 untaken
.Pp
Bytes: 3
.Pp
Flags: None affected.
.Ss CCF
Complement Carry Flag.
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy N
0
.It Sy H
0
.It Sy C
Inverted.
.El
.Ss CP A,r8
Subtract the value in
.Ar r8
from
.Sy A
and set flags accordingly, but don't store the result.
This is useful for ComParing values.
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
1
.It Sy H
Set if borrow from bit 4.
.It Sy C
Set if borrow (i.e. if
.Ar r8
>
.Sy A ) .
.El
.Ss CP A,[HL]
Subtract the byte pointed to by
.Sy HL
from
.Sy A
and set flags accordingly, but don't store the result.
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: See
.Sx CP A,r8
.Ss CP A,n8
Subtract the value
.Ar n8
from
.Sy A
and set flags accordingly, but don't store the result.
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: See
.Sx CP A,r8
.Ss CPL
ComPLement accumulator
.Po Sy A
=
.Sy ~A
.Pc .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy N
1
.It Sy H
1
.El
.Ss DAA
Decimal Adjust Accumulator to get a correct BCD representation after an arithmetic instruction.
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy H
0
.It Sy C
Set or reset depending on the operation.
.El
.Ss DEC r8
Decrement value in register
.Ar r8
by 1.
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
1
.It Sy H
Set if borrow from bit 4.
.El
.Ss DEC [HL]
Decrement the byte pointed to by
.Sy HL
by 1.
.Pp
Cycles: 3
.Pp
Bytes: 1
.Pp
Flags: See
.Sx DEC r8
.Ss DEC r16
Decrement value in register
.Ar r16
by 1.
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss DEC SP
Decrement value in register
.Sy SP
by 1.
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss DI
Disable Interrupts by clearing the
.Sy IME
flag.
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss EI
Enable Interrupts by setting the
.Sy IME
flag.
The flag is only set
.Em after
the instruction following
.Sy EI .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss HALT
Enter CPU low-power consumption mode until an interrupt occurs.
The exact behavior of this instruction depends on the state of the
.Sy IME
flag.
.Bl -tag -width Ds
.It Sy IME No set
The CPU enters low-power mode until
.Em after
an interrupt is about to be serviced.
The handler is executed normally, and the CPU resumes execution after the
.Ic HALT
when that returns.
.It Sy IME No not set
The behavior depends on whether an interrupt is pending (i.e.\&
.Ql [IE] & [IF]
is non-zero).
.Bl -tag -width Ds
.It None pending
As soon as an interrupt becomes pending, the CPU resumes execution.
This is like the above, except that the handler is
.Em not
called.
.It Some pending
The CPU continues execution after the
.Ic HALT ,
but the byte after it is read twice in a row
.Po
.Sy PC
is not incremented, due to a hardware bug
.Pc .
.El
.El
.Pp
Cycles: -
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss INC r8
Increment value in register
.Ar r8
by 1.
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
Set if overflow from bit 3.
.El
.Ss INC [HL]
Increment the byte pointed to by
.Sy HL
by 1.
.Pp
Cycles: 3
.Pp
Bytes: 1
.Pp
Flags: See
.Sx INC r8
.Ss INC r16
Increment value in register
.Ar r16
by 1.
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss INC SP
Increment value in register
.Sy SP
by 1.
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss JP n16
Jump to address
.Ar n16 ;
effectively, store
.Ar n16
into
.Sy PC .
.Pp
Cycles: 4
.Pp
Bytes: 3
.Pp
Flags: None affected.
.Ss JP cc,n16
Jump to address
.Ar n16
if condition
.Ar cc
is met.
.Pp
Cycles: 4 taken / 3 untaken
.Pp
Bytes: 3
.Pp
Flags: None affected.
.Ss JP HL
Jump to address in
.Sy HL ;
effectively, load
.Sy PC
with value in register
.Sy HL .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss JR n16
Relative Jump to address
.Ar n16 .
The address is encoded as a signed 8-bit offset from the address immediately following the
.Ic JR
instruction, so the target address
.Ar n16
must be between
.Sy -128
and
.Sy 127
bytes away.
For example:
.Bd -literal -offset indent
    JR Label  ; no-op; encoded offset of 0
Label:
    JR Label  ; infinite loop; encoded offset of -2
.Ed
.Pp
Cycles: 3
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Ss JR cc,n16
Relative Jump to address
.Ar n16
if condition
.Ar cc
is met.
.Pp
Cycles: 3 taken / 2 untaken
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Ss LD r8,r8
Load (copy) value in register on the right into register on the left.
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss LD r8,n8
Load value
.Ar n8
into register
.Ar r8 .
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Ss LD r16,n16
Load value
.Ar n16
into register
.Ar r16 .
.Pp
Cycles: 3
.Pp
Bytes: 3
.Pp
Flags: None affected.
.Ss LD [HL],r8
Store value in register
.Ar r8
into the byte pointed to by register
.Sy HL .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss LD [HL],n8
Store value
.Ar n8
into the byte pointed to by register
.Sy HL .
.Pp
Cycles: 3
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Ss LD r8,[HL]
Load value into register
.Ar r8
from the byte pointed to by register
.Sy HL .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss LD [r16],A
Store value in register
.Sy A
into the byte pointed to by register
.Ar r16 .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss LD [n16],A
Store value in register
.Sy A
into the byte at address
.Ar n16 .
.Pp
Cycles: 4
.Pp
Bytes: 3
.Pp
Flags: None affected.
.Ss LDH [n16],A
Store value in register
.Sy A
into the byte at address
.Ar n16 ,
provided the address is between
.Ad $FF00
and
.Ad $FFFF .
.Pp
Cycles: 3
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Pp
This is sometimes written as
.Ql LDIO [n16],A ,
or
.Ql LD [$FF00+n8],A .
.Ss LDH [C],A
Store value in register
.Sy A
into the byte at address
.Ad $FF00+C .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Pp
This is sometimes written as
.Ql LDIO [C],A ,
or
.Ql LD [$FF00+C],A .
.Ss LD A,[r16]
Load value in register
.Sy A
from the byte pointed to by register
.Ar r16 .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss LD A,[n16]
Load value in register
.Sy A
from the byte at address
.Ar n16 .
.Pp
Cycles: 4
.Pp
Bytes: 3
.Pp
Flags: None affected.
.Ss LDH A,[n16]
Load value in register
.Sy A
from the byte at address
.Ar n16 ,
provided the address is between
.Ad $FF00
and
.Ad $FFFF .
.Pp
Cycles: 3
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Pp
This is sometimes written as
.Ql LDIO A,[n16] ,
or
.Ql LD A,[$FF00+n8] .
.Ss LDH A,[C]
Load value in register
.Sy A
from the byte at address
.Ad $FF00+c .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Pp
This is sometimes written as
.Ql LDIO A,[C] ,
or
.Ql LD A,[$FF00+C] .
.Ss LD [HLI],A
Store value in register
.Sy A
into the byte pointed by
.Sy HL
and increment
.Sy HL
afterwards.
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Pp
This is sometimes written as
.Ql LD [HL+],A ,
or
.Ql LDI [HL],A .
.Ss LD [HLD],A
Store value in register
.Sy A
into the byte pointed by
.Sy HL
and decrement
.Sy HL
afterwards.
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Pp
This is sometimes written as
.Ql LD [HL-],A ,
or
.Ql LDD [HL],A .
.Ss LD A,[HLD]
Load value into register
.Sy A
from the byte pointed by
.Sy HL
and decrement
.Sy HL
afterwards.
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Pp
This is sometimes written as
.Ql LD A,[HL-] ,
or
.Ql LDD A,[HL] .
.Ss LD A,[HLI]
Load value into register
.Sy A
from the byte pointed by
.Sy HL
and increment
.Sy HL
afterwards.
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Pp
This is sometimes written as
.Ql LD A,[HL+] ,
or
.Ql LDI A,[HL] .
.Ss LD SP,n16
Load value
.Ar n16
into register
.Sy SP .
.Pp
Cycles: 3
.Pp
Bytes: 3
.Pp
Flags: None affected.
.Ss LD [n16],SP
Store
.Sy SP & $FF
at address
.Ar n16
and
.Sy SP >> 8
at address
.Ar n16
+ 1.
.Pp
Cycles: 5
.Pp
Bytes: 3
.Pp
Flags: None affected.
.Ss LD HL,SP+e8
Add the signed value
.Ar e8
to
.Sy SP
and store the result in
.Sy HL .
.Pp
Cycles: 3
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
0
.It Sy N
0
.It Sy H
Set if overflow from bit 3.
.It Sy C
Set if overflow from bit 7.
.El
.Ss LD SP,HL
Load register
.Sy HL
into register
.Sy SP .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss NOP
No OPeration.
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss OR A,r8
Store into
.Sy A
the bitwise OR of the value in
.Ar r8
and
.Sy A .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
0
.El
.Ss OR A,[HL]
Store into
.Sy A
the bitwise OR of the byte pointed to by
.Sy HL
and
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: See
.Sx OR A,r8
.Ss OR A,n8
Store into
.Sy A
the bitwise OR of
.Ar n8
and
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: See
.Sx OR A,r8
.Ss POP AF
Pop register
.Sy AF
from the stack.
This is roughly equivalent to the following
.Em imaginary
instructions:
.Bd -literal -offset indent
ld f, [sp] ; See below for individual flags
inc sp
ld a, [sp]
inc sp
.Ed
.Pp
Cycles: 3
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set from bit 7 of the popped low byte.
.It Sy N
Set from bit 6 of the popped low byte.
.It Sy H
Set from bit 5 of the popped low byte.
.It Sy C
Set from bit 4 of the popped low byte.
.El
.Ss POP r16
Pop register
.Ar r16
from the stack.
This is roughly equivalent to the following
.Em imaginary
instructions:
.Bd -literal -offset indent
ld LOW(r16), [sp] ; C, E or L
inc sp
ld HIGH(r16), [sp] ; B, D or H
inc sp
.Ed
.Pp
Cycles: 3
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss PUSH AF
Push register
.Sy AF
into the stack.
This is roughly equivalent to the following
.Em imaginary
instructions:
.Bd -literal -offset indent
dec sp
ld [sp], a
dec sp
ld [sp], flag_Z << 7 | flag_N << 6 | flag_H << 5 | flag_C << 4
.Ed
.Pp
Cycles: 4
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss PUSH r16
Push register
.Ar r16
into the stack.
This is roughly equivalent to the following
.Em imaginary
instructions:
.Bd -literal -offset indent
dec sp
ld [sp], HIGH(r16) ; B, D or H
dec sp
ld [sp], LOW(r16) ; C, E or L
.Ed
.Pp
Cycles: 4
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss RES u3,r8
Set bit
.Ar u3
in register
.Ar r8
to 0.
Bit 0 is the rightmost one, bit 7 the leftmost one.
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Ss RES u3,[HL]
Set bit
.Ar u3
in the byte pointed by
.Sy HL
to 0.
Bit 0 is the rightmost one, bit 7 the leftmost one.
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Ss RET
Return from subroutine.
This is basically a
.Sy POP PC
(if such an instruction existed).
See
.Sx POP r16
for an explanation of how
.Sy POP
works.
.Pp
Cycles: 4
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss RET cc
Return from subroutine if condition
.Ar cc
is met.
.Pp
Cycles: 5 taken / 2 untaken
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss RETI
Return from subroutine and enable interrupts.
This is basically equivalent to executing
.Sx EI
then
.Sx RET ,
meaning that
.Sy IME
is set right after this instruction.
.Pp
Cycles: 4
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss RL r8
Rotate bits in register
.Ar r8
left, through the carry flag.
.Bd -literal
  ┏━ Flags ━┓ ┏━━━━━━━ r8 ━━━━━━┓
┌─╂─   C   ←╂─╂─ b7 ← ... ← b0 ←╂─┐
│ ┗━━━━━━━━━┛ ┗━━━━━━━━━━━━━━━━━┛ │
└─────────────────────────────────┘
.Ed
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss RL [HL]
Rotate the byte pointed to by
.Sy HL
left, through the carry flag.
.Bd -literal
  ┏━ Flags ━┓ ┏━━━━━━ [HL] ━━━━━┓
┌─╂─   C   ←╂─╂─ b7 ← ... ← b0 ←╂─┐
│ ┗━━━━━━━━━┛ ┗━━━━━━━━━━━━━━━━━┛ │
└─────────────────────────────────┘
.Ed
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: See
.Sx RL r8
.Ss RLA
Rotate register
.Sy A
left, through the carry flag.
.Bd -literal
  ┏━ Flags ━┓ ┏━━━━━━━ A ━━━━━━━┓
┌─╂─   C   ←╂─╂─ b7 ← ... ← b0 ←╂─┐
│ ┗━━━━━━━━━┛ ┗━━━━━━━━━━━━━━━━━┛ │
└─────────────────────────────────┘
.Ed
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
0
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss RLC r8
Rotate register
.Ar r8
left.
.Bd -literal
┏━ Flags ━┓   ┏━━━━━━━ r8 ━━━━━━┓
┃    C   ←╂─┬─╂─ b7 ← ... ← b0 ←╂─┐
┗━━━━━━━━━┛ │ ┗━━━━━━━━━━━━━━━━━┛ │
            └─────────────────────┘
.Ed
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss RLC [HL]
Rotate the byte pointed to by
.Sy HL
left.
.Bd -literal
┏━ Flags ━┓   ┏━━━━━━ [HL] ━━━━━┓
┃    C   ←╂─┬─╂─ b7 ← ... ← b0 ←╂─┐
┗━━━━━━━━━┛ │ ┗━━━━━━━━━━━━━━━━━┛ │
            └─────────────────────┘
.Ed
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: See
.Sx RLC r8
.Ss RLCA
Rotate register
.Sy A
left.
.Bd -literal
┏━ Flags ━┓   ┏━━━━━━━ A ━━━━━━━┓
┃    C   ←╂─┬─╂─ b7 ← ... ← b0 ←╂─┐
┗━━━━━━━━━┛ │ ┗━━━━━━━━━━━━━━━━━┛ │
            └─────────────────────┘
.Ed
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
0
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss RR r8
Rotate register
.Ar r8
right, through the carry flag.
.Bd -literal
  ┏━━━━━━━ r8 ━━━━━━┓ ┏━ Flags ━┓
┌─╂→ b7 → ... → b0 ─╂─╂→   C   ─╂─┐
│ ┗━━━━━━━━━━━━━━━━━┛ ┗━━━━━━━━━┛ │
└─────────────────────────────────┘
.Ed
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss RR [HL]
Rotate the byte pointed to by
.Sy HL
right, through the carry flag.
.Bd -literal
  ┏━━━━━━ [HL] ━━━━━┓ ┏━ Flags ━┓
┌─╂→ b7 → ... → b0 ─╂─╂→   C   ─╂─┐
│ ┗━━━━━━━━━━━━━━━━━┛ ┗━━━━━━━━━┛ │
└─────────────────────────────────┘
.Ed
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: See
.Sx RR r8
.Ss RRA
Rotate register
.Sy A
right, through the carry flag.
.Bd -literal
  ┏━━━━━━━ A ━━━━━━━┓ ┏━ Flags ━┓
┌─╂→ b7 → ... → b0 ─╂─╂→   C   ─╂─┐
│ ┗━━━━━━━━━━━━━━━━━┛ ┗━━━━━━━━━┛ │
└─────────────────────────────────┘
.Ed
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
0
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss RRC r8
Rotate register
.Ar r8
right.
.Bd -literal
  ┏━━━━━━━ r8 ━━━━━━┓   ┏━ Flags ━┓
┌─╂→ b7 → ... → b0 ─╂─┬─╂→   C    ┃
│ ┗━━━━━━━━━━━━━━━━━┛ │ ┗━━━━━━━━━┛
└─────────────────────┘
.Ed
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss RRC [HL]
Rotate the byte pointed to by
.Sy HL
right.
.Bd -literal
  ┏━━━━━━ [HL] ━━━━━┓   ┏━ Flags ━┓
┌─╂→ b7 → ... → b0 ─╂─┬─╂→   C    ┃
│ ┗━━━━━━━━━━━━━━━━━┛ │ ┗━━━━━━━━━┛
└─────────────────────┘
.Ed
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: See
.Sx RRC r8
.Ss RRCA
Rotate register
.Sy A
right.
.Bd -literal
  ┏━━━━━━━ A ━━━━━━━┓   ┏━ Flags ━┓
┌─╂→ b7 → ... → b0 ─╂─┬─╂→   C    ┃
│ ┗━━━━━━━━━━━━━━━━━┛ │ ┗━━━━━━━━━┛
└─────────────────────┘
.Ed
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
0
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss RST vec
Call address
.Ar vec .
This is a shorter and faster equivalent to
.Sx CALL
for suitable values of
.Ar vec .
.Pp
Cycles: 4
.Pp
Bytes: 1
.Pp
Flags: None affected.
.Ss SBC A,r8
Subtract the value in
.Ar r8
and the carry flag from
.Sy A .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
1
.It Sy H
Set if borrow from bit 4.
.It Sy C
Set if borrow (i.e. if
.Po Ar r8
+ carry
.Pc >
.Sy A ) .
.El
.Ss SBC A,[HL]
Subtract the byte pointed to by
.Sy HL
and the carry flag from
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: See
.Sx SBC A,r8
.Ss SBC A,n8
Subtract the value
.Ar n8
and the carry flag from
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: See
.Sx SBC A,r8
.Ss SCF
Set Carry Flag.
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy N
0
.It Sy H
0
.It Sy C
1
.El
.Ss SET u3,r8
Set bit
.Ar u3
in register
.Ar r8
to 1.
Bit 0 is the rightmost one, bit 7 the leftmost one.
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Ss SET u3,[HL]
Set bit
.Ar u3
in the byte pointed by
.Sy HL
to 1.
Bit 0 is the rightmost one, bit 7 the leftmost one.
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Ss SLA r8
Shift Left Arithmetically register
.Ar r8 .
.Bd -literal
┏━ Flags ━┓ ┏━━━━━━━ r8 ━━━━━━┓
┃    C   ←╂─╂─ b7 ← ... ← b0 ←╂─ 0
┗━━━━━━━━━┛ ┗━━━━━━━━━━━━━━━━━┛
.Ed
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss SLA [HL]
Shift Left Arithmetically the byte pointed to by
.Sy HL .
.Bd -literal
┏━ Flags ━┓ ┏━━━━━━ [HL] ━━━━━┓
┃    C   ←╂─╂─ b7 ← ... ← b0 ←╂─ 0
┗━━━━━━━━━┛ ┗━━━━━━━━━━━━━━━━━┛
.Ed
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: See
.Sx SLA r8
.Ss SRA r8
Shift Right Arithmetically register
.Ar r8
.Pq bit 7 of Ar r8 No is unchanged .
.Bd -literal
┏━━━━━━ r8 ━━━━━━┓ ┏━ Flags ━┓
┃ b7 → ... → b0 ─╂─╂→   C    ┃
┗━━━━━━━━━━━━━━━━┛ ┗━━━━━━━━━┛
.Ed
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss SRA [HL]
Shift Right Arithmetically the byte pointed to by
.Sy HL
.Pq bit 7 of the byte pointed to by Sy HL No is unchanged .
.Bd -literal
┏━━━━━ [HL] ━━━━━┓ ┏━ Flags ━┓
┃ b7 → ... → b0 ─╂─╂→   C    ┃
┗━━━━━━━━━━━━━━━━┛ ┗━━━━━━━━━┛
.Ed
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: See
.Sx SRA r8
.Ss SRL r8
Shift Right Logically register
.Ar r8 .
.Bd -literal
   ┏━━━━━━━ r8 ━━━━━━┓ ┏━ Flags ━┓
0 ─╂→ b7 → ... → b0 ─╂─╂→   C    ┃
   ┗━━━━━━━━━━━━━━━━━┛ ┗━━━━━━━━━┛
.Ed
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
Set according to result.
.El
.Ss SRL [HL]
Shift Right Logically the byte pointed to by
.Sy HL .
.Bd -literal
   ┏━━━━━━ [HL] ━━━━━┓ ┏━ Flags ━┓
0 ─╂→ b7 → ... → b0 ─╂─╂→   C    ┃
   ┗━━━━━━━━━━━━━━━━━┛ ┗━━━━━━━━━┛
.Ed
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: See
.Sx SRL r8
.Ss STOP
Enter CPU very low power mode.
Also used to switch between double and normal speed CPU modes in GBC.
.Pp
Cycles: -
.Pp
Bytes: 2
.Pp
Flags: None affected.
.Ss SUB A,r8
Subtract the value in
.Ar r8
from
.Sy A .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
1
.It Sy H
Set if borrow from bit 4.
.It Sy C
Set if borrow (set if
.Ar r8
>
.Sy A ) .
.El
.Ss SUB A,[HL]
Subtract the byte pointed to by
.Sy HL
from
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: See
.Sx SUB A,r8
.Ss SUB A,n8
Subtract the value
.Ar n8
from
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: See
.Sx SUB A,r8
.Ss SWAP r8
Swap the upper 4 bits in register
.Ar r8
and the lower 4 ones.
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
0
.El
.Ss SWAP [HL]
Swap the upper 4 bits in the byte pointed by
.Sy HL
and the lower 4 ones.
.Pp
Cycles: 4
.Pp
Bytes: 2
.Pp
Flags: See
.Sx SWAP r8
.Ss XOR A,r8
Bitwise XOR between the value in
.Ar r8
and
.Sy A .
.Pp
Cycles: 1
.Pp
Bytes: 1
.Pp
Flags:
.Bl -hang -compact
.It Sy Z
Set if result is 0.
.It Sy N
0
.It Sy H
0
.It Sy C
0
.El
.Ss XOR A,[HL]
Bitwise XOR between the byte pointed to by
.Sy HL
and
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 1
.Pp
Flags: See
.Sx XOR A,r8
.Ss XOR A,n8
Bitwise XOR between the value in
.Ar n8
and
.Sy A .
.Pp
Cycles: 2
.Pp
Bytes: 2
.Pp
Flags: See
.Sx XOR A,r8
.Sh SEE ALSO
.Xr rgbasm 1 ,
.Xr rgblink 1 ,
.Xr rgbfix 1 ,
.Xr rgbgfx 1 ,
.Xr rgbds 7
.Sh HISTORY
.Xr rgbasm 1
was originally written by
.An Carsten S\(/orensen
as part of the ASMotor package, and was later repackaged in RGBDS by
.An Justin Lloyd .
It is now maintained by a number of contributors at
.Lk https://github.com/gbdev/rgbds .