FIREWALL-OFFLINE-C(1) firewall-offline-cmd FIREWALL-OFFLINE-C(1) NAME firewall-offline-cmd - firewalld offline command line client SYNOPSIS firewall-offline-cmd [OPTIONS...] DESCRIPTION firewall-offline-cmd is an offline command line client of the firewalld daemon. It should be used only if the firewalld service is not running. For example to migrate from system-config-firewall/lokkit or in the install environment to configure firewall settings with kickstart. Some lokkit options can not be automatically converted for firewalld, they will result in an error or warning message. This tool tries to convert as much as possible, but there are limitations for example with custom rules, modules and masquerading. Check the firewall configuration after using this tool. OPTIONS If no options are given, configuration from /etc/sysconfig/system-config-firewall will be migrated. Sequence options are the options that can be specified multiple times, the exit code is 0 if there is at least one item that succeeded. The ALREADY_ENABLED (11), NOT_ENABLED (12) and also ZONE_ALREADY_SET (16) errors are treated as succeeded. If there are issues while parsing the items, then these are treated as warnings and will not change the result as long as there is a succeeded one. Without any succeeded item, the exit code will depend on the error codes. If there is exactly one error code, then this is used. If there are more than one then UNKNOWN_ERROR (254) will be used. The following options are supported: General Options -h, --help Prints a short help text and exits. -V, --version Prints the version string of firewalld and exits. -q, --quiet Do not print status messages. --default-config Path to firewalld default configuration. This usually defaults to /usr/lib/firewalld. --system-config Path to firewalld system (user) configuration. This usually defaults to /etc/firewalld. Status Options --enabled Enable the firewall. This option is a default option and will activate the firewall if not already enabled as long as the option --disabled is not given. --disabled Disable the firewall by disabling the firewalld service. --check-config Run checks on the permanent (default and system) configuration. This includes XML validity and semantics. This is may be used with --system-config to check the validity of handwritten configuration files before copying them to the standard location. --reset-to-defaults Reset configuration to firewalld's default configuration Lokkit Compatibility Options These options are nearly identical to the options of lokkit. --migrate-system-config-firewall=file Migrate system-config-firewall configuration from the given file. No further --addmodule=module This option will result in a warning message and will be ignored. Handling of netfilter helpers has been merged into services completely. Adding or removing netfilter helpers outside of services is therefore not needed anymore. For more information on handling netfilter helpers in services, please have a look at firewalld.zone(5). --removemodule This option will result in a warning message and will be ignored. Handling of netfilter helpers has been merged into services completely. Adding or removing netfilter helpers outside of services is therefore not needed anymore. For more information on handling netfilter helpers in services, please have a look at firewalld.zone(5). --remove-service=service Remove a service from the default zone. This option can be specified multiple times. The service is one of the firewalld provided services. To get a list of the supported services, use firewall-cmd --get-services. -s service, --service=service Add a service to the default zone. This option can be specified multiple times. The service is one of the firewalld provided services. To get a list of the supported services, use firewall-cmd --get-services. -p portid[-portid]:protocol, --port=portid[-portid]:protocol Add the port to the default zone. This option can be specified multiple times. The port can either be a single port number or a port range portid-portid. The protocol can either be tcp, udp, sctp or dccp. -t interface, --trust=interface This option will result in a warning message. Mark an interface as trusted. This option can be specified multiple times. The interface will be bound to the trusted zone. If the interface is used in a NetworkManager managed connection or if there is an ifcfg file for this interface, the zone will be changed to the zone defined in the configuration as soon as it gets activated. To change the zone of a connection use nm-connection-editor and set the zone to trusted, for an ifcfg file, use an editor and add "ZONE=trusted". If the zone is not defined in the ifcfg file, the firewalld default zone will be used. -m interface, --masq=interface This option will result in a warning message. Masquerading will be enabled in the default zone. The interface argument will be ignored. This is for IPv4 only. --custom-rules=[type:][table:]filename This option will result in a warning message and will be ignored. Custom rule files are not supported by firewalld. --forward-port=if=interface:port=port:proto=protocol[:toport=destination port:][:toaddr=destination address] This option will result in a warning message. Add the IPv4 forward port in the default zone. This option can be specified multiple times. The port can either be a single port number portid or a port range portid-portid. The protocol can either be tcp, udp, sctp or dccp. The destination address is an IP address. --block-icmp=icmptype This option will result in a warning message. Add an ICMP block for icmptype in the default zone. This option can be specified multiple times. The icmptype is the one of the icmp types firewalld supports. To get a listing of supported icmp types: firewall-cmd --get-icmptypes Log Denied Options --get-log-denied Print the log denied setting. --set-log-denied=value Add logging rules right before reject and drop rules in the INPUT, FORWARD and OUTPUT chains for the default rules and also final reject and drop rules in zones for the configured link-layer packet type. The possible values are: all, unicast, broadcast, multicast and off. The default setting is off, which disables the logging. This is a runtime and permanent change and will also reload the firewall to be able to add the logging rules. Zone Options --get-default-zone Print default zone for connections and interfaces. --set-default-zone=zone Set default zone for connections and interfaces where no zone has been selected. Setting the default zone changes the zone for the connections or interfaces, that are using the default zone. --get-zones Print predefined zones as a space separated list. --get-services Print predefined services as a space separated list. --get-icmptypes Print predefined icmptypes as a space separated list. --get-zone-of-interface=interface Print the name of the zone the interface is bound to or no zone. --get-zone-of-source=source[/mask]|MAC|ipset:ipset Print the name of the zone the source is bound to or no zone. --info-zone=zone Print information about the zone zone. The output format is: zone interfaces: interface1 .. sources: source1 .. services: service1 .. ports: port1 .. protocols: protocol1 .. forward-ports: forward-port1 .. source-ports: source-port1 .. icmp-blocks: icmp-type1 .. rich rules: rich-rule1 .. --list-all-zones List everything added for or enabled in all zones. The output format is: zone1 interfaces: interface1 .. sources: source1 .. services: service1 .. ports: port1 .. protocols: protocol1 .. forward-ports: forward-port1 .. source-ports: source-port1 .. icmp-blocks: icmp-type1 .. rich rules: rich-rule1 .. .. --new-zone=zone Add a new permanent zone. Zone names must be alphanumeric and may additionally include characters: '_' and '-'. --new-zone-from-file=filename [--name=zone] Add a new permanent zone from a prepared zone file with an optional name override. --path-zone=zone Print path of the zone configuration file. --delete-zone=zone Delete an existing permanent zone. Policy Options --get-policies Print predefined policies as a space separated list. --info-policy=policy Print information about the policy policy. --list-all-policies List everything added for or enabled in all policies. --new-policy=policy Add a new permanent policy. Policy names must be alphanumeric and may additionally include characters: '_' and '-'. --new-policy-from-file=filename [--name=policy] Add a new permanent policy from a prepared policy file with an optional name override. --path-policy=policy Print path of the policy configuration file. --delete-policy=policy Delete an existing permanent policy. --load-policy-defaults=policy Load the shipped defaults for a policy. Only applies to policies shipped with firewalld. Does not apply to user defined policies. Options to Adapt and Query Zones and Policies Options in this section affect only one particular zone or policy. If used with --zone=zone or --policy=policy option, they affect the specified zone or policy. If both options are omitted, they affect default zone (see --get-default-zone). [--zone=zone] [--policy=policy] --list-all List everything added or enabled. [--zone=zone] [--policy=policy] --get-target Get the target. [--zone=zone] [--policy=policy] --set-target=target Set the target. For zones target is one of: default, ACCEPT, DROP, REJECT For policies target is one of: CONTINUE, ACCEPT, DROP, REJECT default is similar to REJECT, but it implicitly allows ICMP packets. [--zone=zone] [--policy=policy] --set-description=description Set description. [--zone=zone] [--policy=policy] --get-description Print description. [--zone=zone] [--policy=policy] --set-short=description Set short description. [--zone=zone] [--policy=policy] --get-short Print short description. [--zone=zone] [--policy=policy] --list-services List services added as a space separated list. [--zone=zone] [--policy=policy] --add-service=service Add a service. This option can be specified multiple times. The service is one of the firewalld provided services. To get a list of the supported services, use firewall-cmd --get-services. Note: Some services define connection tracking helpers. Helpers that may operate in client mode (e.g. tftp) must be added to an outbound policy instead of a zone to take effect for clients. Otherwise the helper will not be applied to the outbound traffic. The related traffic, as defined by the connection tracking helper, on the return path (ingress) will be allowed by the stateful firewall rules. An example of an outbound policy for connection tracking helpers: # firewall-cmd --new-policy clientConntrack # firewall-cmd --policy clientConntrack --add-ingress-zone HOST # firewall-cmd --policy clientConntrack --add-egress-zone ANY # firewall-cmd --policy clientConntrack --add-service tftp [--zone=zone] --remove-service-from-zone=service Remove a service from zone. This option can be specified multiple times. If zone is omitted, default zone will be used. [--policy=policy] --remove-service-from-policy=service Remove a service from policy. This option can be specified multiple times. [--zone=zone] [--policy=policy] --query-service=service Return whether service has been added. Returns 0 if true, 1 otherwise. [--zone=zone] [--policy=policy] --list-ports List ports added as a space separated list. A port is of the form portid[-portid]/protocol, it can be either a port and protocol pair or a port range with a protocol. [--zone=zone] [--policy=policy] --add-port=portid[-portid]/protocol Add the port. This option can be specified multiple times. The port can either be a single port number or a port range portid-portid. The protocol can either be tcp, udp, sctp or dccp. [--zone=zone] [--policy=policy] --remove-port=portid[-portid]/protocol Remove the port. This option can be specified multiple times. [--zone=zone] [--policy=policy] --query-port=portid[-portid]/protocol Return whether the port has been added. Returns 0 if true, 1 otherwise. [--zone=zone] [--policy=policy] --list-protocols List protocols added as a space separated list. [--zone=zone] [--policy=policy] --add-protocol=protocol Add the protocol. This option can be specified multiple times. timeval is either a number (of seconds) or number followed by one of characters s (seconds), m (minutes), h (hours), for example 20m or 1h. The protocol can be any protocol supported by the system. Please have a look at /etc/protocols for supported protocols. [--zone=zone] [--policy=policy] --remove-protocol=protocol Remove the protocol. This option can be specified multiple times. [--zone=zone] [--policy=policy] --query-protocol=protocol Return whether the protocol has been added. Returns 0 if true, 1 otherwise. [--zone=zone] [--policy=policy] --list-icmp-blocks List Internet Control Message Protocol (ICMP) type blocks added as a space separated list. [--zone=zone] [--policy=policy] --add-icmp-block=icmptype Add an ICMP block for icmptype. This option can be specified multiple times. The icmptype is the one of the icmp types firewalld supports. To get a listing of supported icmp types: firewall-cmd --get-icmptypes [--zone=zone] [--policy=policy] --remove-icmp-block=icmptype Remove the ICMP block for icmptype. This option can be specified multiple times. [--zone=zone] [--policy=policy] --query-icmp-block=icmptype Return whether an ICMP block for icmptype has been added. Returns 0 if true, 1 otherwise. [--zone=zone] [--policy=policy] --list-forward-ports List IPv4 forward ports added as a space separated list. For IPv6 forward ports, please use the rich language. [--zone=zone] [--policy=policy] --add-forward-port=port=portid[-portid]:proto=protocol[:toport=portid[-portid]][:toaddr=address[/mask]] Add the IPv4 forward port. This option can be specified multiple times. The port can either be a single port number portid or a port range portid-portid. The protocol can either be tcp, udp, sctp or dccp. The destination address is a simple IP address. For IPv6 forward ports, please use the rich language. Note: IP forwarding will be implicitly enabled if toaddr is specified. [--zone=zone] [--policy=policy] --remove-forward-port=port=portid[-portid]:proto=protocol[:toport=portid[-portid]][:toaddr=address[/mask]] Remove the IPv4 forward port. This option can be specified multiple times. For IPv6 forward ports, please use the rich language. [--zone=zone] [--policy=policy] --query-forward-port=port=portid[-portid]:proto=protocol[:toport=portid[-portid]][:toaddr=address[/mask]] Return whether the IPv4 forward port has been added. Returns 0 if true, 1 otherwise. For IPv6 forward ports, please use the rich language. [--zone=zone] [--policy=policy] --list-source-ports List source ports added as a space separated list. A port is of the form portid[-portid]/protocol. [--zone=zone] [--policy=policy] --add-source-port=portid[-portid]/protocol Add the source port. This option can be specified multiple times. The port can either be a single port number or a port range portid-portid. The protocol can either be tcp, udp, sctp or dccp. [--zone=zone] [--policy=policy] --remove-source-port=portid[-portid]/protocol Remove the source port. This option can be specified multiple times. [--zone=zone] [--policy=policy] --query-source-port=portid[-portid]/protocol Return whether the source port has been added. Returns 0 if true, 1 otherwise. [--zone=zone] [--policy=policy] --add-masquerade Enable IPv4 masquerade. Masquerading is useful if the machine is a router and machines connected over an interface in another zone should be able to use the first connection. For IPv6 masquerading, please use the rich language. Note: IP forwarding will be implicitly enabled. [--zone=zone] [--policy=policy] --remove-masquerade Disable IPv4 masquerade. For IPv6 masquerading, please use the rich language. [--zone=zone] [--policy=policy] --query-masquerade Return whether IPv4 masquerading has been enabled. Returns 0 if true, 1 otherwise. For IPv6 masquerading, please use the rich language. [--zone=zone] [--policy=policy] --list-rich-rules List rich language rules added as a newline separated list. [--zone=zone] [--policy=policy] --add-rich-rule='rule' Add rich language rule 'rule'. This option can be specified multiple times. For the rich language rule syntax, please have a look at firewalld.richlanguage(5). [--zone=zone] [--policy=policy] --remove-rich-rule='rule' Remove rich language rule 'rule'. This option can be specified multiple times. For the rich language rule syntax, please have a look at firewalld.richlanguage(5). [--zone=zone] [--policy=policy] --query-rich-rule='rule' Return whether a rich language rule 'rule' has been added. Returns 0 if true, 1 otherwise. For the rich language rule syntax, please have a look at firewalld.richlanguage(5). Options to Adapt and Query Zones Options in this section affect only one particular zone. If used with --zone=zone option, they affect the specified zone. If the option is omitted, they affect the default zone (see --get-default-zone). [--zone=zone] --add-icmp-block-inversion Enable ICMP block inversion. [--zone=zone] --remove-icmp-block-inversion Disable ICMP block inversion. [--zone=zone] --query-icmp-block-inversion Return whether ICMP block inversion is enabled. Returns 0 if true, 1 otherwise. [--zone=zone] --add-forward Enable intra zone forwarding. [--zone=zone] --remove-forward Disable intra zone forwarding. [--zone=zone] --query-forward Return whether intra zone forwarding is enabled. Returns 0 if true, 1 otherwise. [--zone=zone] --get-priority Get the priority of the zone. [--zone=zone] --set-priority Set the zone's priority for packet classification. This will set both the ingress and egress priority. [--zone=zone] --get-ingress-priority Get the ingress priority of the zone. [--zone=zone] --set-ingress-priority Set the zone's ingress priority for packet classification. [--zone=zone] --get-egress-priority Get the egress priority of the zone. [--zone=zone] --set-egress-priority Set the zone's egress priority for packet classification. Options to Adapt and Query Policies Options in this section affect only one particular policy. It's required to specify --policy=policy with these options. --policy=policy --get-priority Get the priority. --policy=policy --set-prioritypriority Set the priority. The priority determines the relative ordering of policies. This is an integer value between -32768 and 32767 where -1 is the default value for new policies and 0 is reserved for internal use. If a priority is < 0, then the policy's rules will execute before all rules in all zones. If a priority is > 0, then the policy's rules will execute after all rules in all zones. --policy=policy --list-ingress-zones List ingress zones added as a space separated list. --policy=policy --add-ingress-zone=zone Add an ingress zone. This option can be specified multiple times. The ingress zone is one of the firewalld provided zones or one of the pseudo-zones: HOST, ANY. HOST is used for traffic originating from the host machine, i.e. the host running firewalld. ANY is used for traffic originating from any zone. This can be thought of as a wild card for zones. However it does not include traffic originating from the host machine - use HOST for that. --policy=policy --remove-ingress-zone=zone Remove an ingress zone. This option can be specified multiple times. --policy=policy --query-ingress-zone=zone Return whether zone has been added. Returns 0 if true, 1 otherwise. --policy=policy --list-egress-zones List egress zones added as a space separated list. --policy=policy --add-egress-zone=zone Add an egress zone. This option can be specified multiple times. The egress zone is one of the firewalld provided zones or one of the pseudo-zones: HOST, ANY. For clarification on HOST and ANY see option --add-ingress-zone. --policy=policy --remove-egress-zone=zone Remove an egress zone. This option can be specified multiple times. --policy=policy --query-egress-zone=zone Return whether zone has been added. Returns 0 if true, 1 otherwise. Options to Handle Bindings of Interfaces Binding an interface to a zone means that this zone settings are used to restrict traffic via the interface. Options in this section affect only one particular zone. If used with --zone=zone option, they affect the zone zone. If the option is omitted, they affect default zone (see --get-default-zone). For a list of predefined zones use firewall-cmd --get-zones. An interface name is a string up to 16 characters long, that may not contain ' ', '/', '!' and '*'. [--zone=zone] --list-interfaces List interfaces that are bound to zone zone as a space separated list. If zone is omitted, default zone will be used. [--zone=zone] --add-interface=interface Bind interface interface to zone zone. If zone is omitted, default zone will be used. [--zone=zone] --change-interface=interface Change zone the interface interface is bound to to zone zone. If zone is omitted, default zone will be used. If old and new zone are the same, the call will be ignored without an error. If the interface has not been bound to a zone before, it will behave like --add-interface. [--zone=zone] --query-interface=interface Query whether interface interface is bound to zone zone. Returns 0 if true, 1 otherwise. [--zone=zone] --remove-interface=interface Remove binding of interface interface from zone zone. If zone is omitted, default zone will be used. Options to Handle Bindings of Sources Binding a source to a zone means that this zone settings will be used to restrict traffic from this source. A source address or address range is either an IP address or a network IP address with a mask for IPv4 or IPv6 or a MAC address or an ipset with the ipset: prefix. For IPv4, the mask can be a network mask or a plain number. For IPv6 the mask is a plain number. The use of host names is not supported. Options in this section affect only one particular zone. If used with --zone=zone option, they affect the zone zone. If the option is omitted, they affect default zone (see --get-default-zone). For a list of predefined zones use firewall-cmd --get-zones. [--zone=zone] --list-sources List sources that are bound to zone zone as a space separated list. If zone is omitted, default zone will be used. [--zone=zone] --add-source=source[/mask]|MAC|ipset:ipset Bind the source to zone zone. If zone is omitted, default zone will be used. [--zone=zone] --change-source=source[/mask]|MAC|ipset:ipset Change zone the source is bound to to zone zone. If zone is omitted, default zone will be used. If old and new zone are the same, the call will be ignored without an error. If the source has not been bound to a zone before, it will behave like --add-source. [--zone=zone] --query-source=source[/mask]|MAC|ipset:ipset Query whether the source is bound to the zone zone. Returns 0 if true, 1 otherwise. [--zone=zone] --remove-source=source[/mask]|MAC|ipset:ipset Remove binding of the source from zone zone. If zone is omitted, default zone will be used. IPSet Options --new-ipset=ipset --type=ipset type [--option=ipset option[=value]] Add a new permanent ipset with specifying the type and optional options. ipset names must be alphanumeric and may additionally include characters: '_' and '-'. --new-ipset-from-file=filename [--name=ipset] Add a new permanent ipset from a prepared ipset file with an optional name override. --delete-ipset=ipset Delete an existing permanent ipset. --info-ipset=ipset Print information about the ipset ipset. The output format is: ipset type: type options: option1[=value1] .. entries: entry1 .. --get-ipsets Print predefined ipsets as a space separated list. --ipset=ipset --add-entry=entry Add a new entry to the ipset. --ipset=ipset --remove-entry=entry Remove an entry from the ipset. --ipset=ipset --query-entry=entry Return whether the entry has been added to an ipset. Returns 0 if true, 1 otherwise. --ipset=ipset --get-entries List all entries of the ipset. --ipset=ipset --add-entries-from-file=filename Add a new entries to the ipset from the file. For all entries that are listed in the file but already in the ipset, a warning will be printed. The file should contain an entry per line. Lines starting with an hash or semicolon are ignored. Also empty lines. --ipset=ipset --remove-entries-from-file=filename Remove existing entries from the ipset from the file. For all entries that are listed in the file but not in the ipset, a warning will be printed. The file should contain an entry per line. Lines starting with an hash or semicolon are ignored. Also empty lines. --ipset=ipset --set-description=description Set new description to ipset --ipset=ipset --get-description Print description for ipset --ipset=ipset --set-short=description Set new short description to ipset --ipset=ipset --get-short Print short description for ipset --path-ipset=ipset Print path of the ipset configuration file. Service Options --info-service=service Print information about the service service. The output format is: service ports: port1 .. protocols: protocol1 .. source-ports: source-port1 .. helpers: helper1 .. destination: ipv1:address1 .. --new-service=service Add a new permanent service. Service names must be alphanumeric and may additionally include characters: '_' and '-'. --new-service-from-file=filename [--name=service] Add a new permanent service from a prepared service file with an optional name override. --delete-service=service Delete an existing permanent service. --path-service=service Print path of the service configuration file. --service=service --set-description=description Set new description to service --service=service --get-description Print description for service --service=service --set-short=description Set short description to service --service=service --get-short Print short description for service --service=service --add-port=portid[-portid]/protocol Add a new port to the permanent service. --service=service --remove-port=portid[-portid]/protocol Remove a port from the permanent service. --service=service --query-port=portid[-portid]/protocol Return whether the port has been added to the permanent service. --service=service --get-ports List ports added to the permanent service. --service=service --add-protocol=protocol Add a new protocol to the permanent service. --service=service --remove-protocol=protocol Remove a protocol from the permanent service. --service=service --query-protocol=protocol Return whether the protocol has been added to the permanent service. --service=service --get-protocols List protocols added to the permanent service. --service=service --add-source-port=portid[-portid]/protocol Add a new source port to the permanent service. --service=service --remove-source-port=portid[-portid]/protocol Remove a source port from the permanent service. --service=service --query-source-port=portid[-portid]/protocol Return whether the source port has been added to the permanent service. --service=service --get-source-ports List source ports added to the permanent service. --service=service --add-helper=helper Add a new helper to the permanent service. --service=service --remove-helper=helper Remove a helper from the permanent service. --service=service --query-helper=helper Return whether the helper has been added to the permanent service. --service=service --get-service-helpers List helpers added to the permanent service. --service=service --set-destination=ipv:address[/mask] Set destination for ipv to address[/mask] in the permanent service. --service=service --remove-destination=ipv Remove the destination for ipv from the permanent service. --service=service --query-destination=ipv:address[/mask] Return whether the destination ipv to address[/mask] has been set in the permanent service. --service=service --get-destinations List destinations added to the permanent service. --service=service --add-include=service Add a new include to the permanent service. --service=service --remove-include=service Remove a include from the permanent service. --service=service --query-include=service Return whether the include has been added to the permanent service. --service=service --get-includes List includes added to the permanent service. Helper Options Options in this section affect only one particular helper. --info-helper=helper Print information about the helper helper. The output format is: helper family: family module: module ports: port1 .. The following options are only usable in the permanent configuration. --new-helper=helper --module=nf_conntrack_module [--family=ipv4|ipv6] Add a new permanent helper with module and optionally family defined. Helper names must be alphanumeric and may additionally include characters: '-'. --new-helper-from-file=filename [--name=helper] Add a new permanent helper from a prepared helper file with an optional name override. --delete-helper=helper Delete an existing permanent helper. --load-helper-defaults=helper Load helper default settings or report NO_DEFAULTS error. --path-helper=helper Print path of the helper configuration file. --get-helpers Print predefined helpers as a space separated list. --helper=helper --set-description=description Set new description to helper --helper=helper --get-description Print description for helper --helper=helper --set-short=description Set short description to helper --helper=helper --get-short Print short description for helper --helper=helper --add-port=portid[-portid]/protocol Add a new port to the permanent helper. --helper=helper --remove-port=portid[-portid]/protocol Remove a port from the permanent helper. --helper=helper --query-port=portid[-portid]/protocol Return whether the port has been added to the permanent helper. --helper=helper --get-ports List ports added to the permanent helper. --helper=helper --set-module=description Set module description for helper --helper=helper --get-module Print module description for helper --helper=helper --set-family=description Set family description for helper --helper=helper --get-family Print family description of helper Internet Control Message Protocol (ICMP) type Options --info-icmptype=icmptype Print information about the icmptype icmptype. The output format is: icmptype destination: ipv1 .. --new-icmptype=icmptype Add a new permanent icmptype. ICMP type names must be alphanumeric and may additionally include characters: '_' and '-'. --new-icmptype-from-file=filename [--name=icmptype] Add a new permanent icmptype from a prepared icmptype file with an optional name override. --delete-icmptype=icmptype Delete an existing permanent icmptype. --icmptype=icmptype --set-description=description Set new description to icmptype --icmptype=icmptype --get-description Print description for icmptype --icmptype=icmptype --set-short=description Set short description to icmptype --icmptype=icmptype --get-short Print short description for icmptype --icmptype=icmptype --add-destination=ipv Enable destination for ipv in permanent icmptype. ipv is one of ipv4 or ipv6. --icmptype=icmptype --remove-destination=ipv Disable destination for ipv in permanent icmptype. ipv is one of ipv4 or ipv6. --icmptype=icmptype --query-destination=ipv Return whether destination for ipv is enabled in permanent icmptype. ipv is one of ipv4 or ipv6. --icmptype=icmptype --get-destinations List destinations in permanent icmptype. --path-icmptype=icmptype Print path of the icmptype configuration file. Direct Options DEPRECATED The direct interface has been deprecated. It will be removed in a future release. It is superseded by policies, see firewalld.policies(5). The direct options give a more direct access to the firewall. These options require user to know basic iptables concepts, i.e. table (filter/mangle/nat/...), chain (INPUT/OUTPUT/FORWARD/...), commands (-A/-D/-I/...), parameters (-p/-s/-d/-j/...) and targets (ACCEPT/DROP/REJECT/...). Direct options should be used only as a last resort when it's not possible to use for example --add-service=service or --add-rich-rule='rule'. Warning: Direct rules behavior is different depending on the value of FirewallBackend. See CAVEATS in firewalld.direct(5). The first argument of each option has to be ipv4 or ipv6 or eb. With ipv4 it will be for IPv4 (iptables(8)), with ipv6 for IPv6 (ip6tables(8)) and with eb for ethernet bridges (ebtables(8)). --direct --get-all-chains Get all chains added to all tables. This option concerns only chains previously added with --direct --add-chain. --direct --get-chains { ipv4 | ipv6 | eb } table Get all chains added to table table as a space separated list. This option concerns only chains previously added with --direct --add-chain. --direct --add-chain { ipv4 | ipv6 | eb } table chain Add a new chain with name chain to table table. There already exist basic chains to use with direct options, for example INPUT_direct chain (see iptables-save | grep direct output for all of them). These chains are jumped into before chains for zones, i.e. every rule put into INPUT_direct will be checked before rules in zones. --direct --remove-chain { ipv4 | ipv6 | eb } table chain Remove the chain with name chain from table table. --direct --query-chain { ipv4 | ipv6 | eb } table chain Return whether a chain with name chain exists in table table. Returns 0 if true, 1 otherwise. This option concerns only chains previously added with --direct --add-chain. --direct --get-all-rules Get all rules added to all chains in all tables as a newline separated list of the priority and arguments. --direct --get-rules { ipv4 | ipv6 | eb } table chain Get all rules added to chain chain in table table as a newline separated list of the priority and arguments. --direct --add-rule { ipv4 | ipv6 | eb } table chain priority args Add a rule with the arguments args to chain chain in table table with priority priority. The priority is used to order rules. Priority 0 means add rule on top of the chain, with a higher priority the rule will be added further down. Rules with the same priority are on the same level and the order of these rules is not fixed and may change. If you want to make sure that a rule will be added after another one, use a low priority for the first and a higher for the following. --direct --remove-rule { ipv4 | ipv6 | eb } table chain priority args Remove a rule with priority and the arguments args from chain chain in table table. --direct --remove-rules { ipv4 | ipv6 | eb } table chain Remove all rules in the chain with name chain exists in table table. This option concerns only rules previously added with --direct --add-rule in this chain. --direct --query-rule { ipv4 | ipv6 | eb } table chain priority args Return whether a rule with priority and the arguments args exists in chain chain in table table. Returns 0 if true, 1 otherwise. --direct --get-all-passthroughs Get all permanent passthrough as a newline separated list of the ipv value and arguments. --direct --get-passthroughs { ipv4 | ipv6 | eb } Get all permanent passthrough rules for the ipv value as a newline separated list of the priority and arguments. --direct --add-passthrough { ipv4 | ipv6 | eb } args Add a permanent passthrough rule with the arguments args for the ipv value. --direct --remove-passthrough { ipv4 | ipv6 | eb } args Remove a permanent passthrough rule with the arguments args for the ipv value. --direct --query-passthrough { ipv4 | ipv6 | eb } args Return whether a permanent passthrough rule with the arguments args exists for the ipv value. Returns 0 if true, 1 otherwise. Lockdown Options Local applications or services are able to change the firewall configuration if they are running as root (example: libvirt) or are authenticated using PolicyKit. With this feature administrators can lock the firewall configuration so that only applications on lockdown whitelist are able to request firewall changes. The lockdown access check limits D-Bus methods that are changing firewall rules. Query, list and get methods are not limited. The lockdown feature is a very light version of user and application policies for firewalld and is turned off by default. --lockdown-on Enable lockdown. Be careful - if firewall-cmd is not on lockdown whitelist when you enable lockdown you won't be able to disable it again with firewall-cmd, you would need to edit firewalld.conf. --lockdown-off Disable lockdown. --query-lockdown Query whether lockdown is enabled. Returns 0 if lockdown is enabled, 1 otherwise. Lockdown Whitelist Options The lockdown whitelist can contain commands, contexts, users and user ids. If a command entry on the whitelist ends with an asterisk '*', then all command lines starting with the command will match. If the '*' is not there the absolute command inclusive arguments must match. Commands for user root and others is not always the same. Example: As root /bin/firewall-cmd is used, as a normal user /usr/bin/firewall-cmd is be used on Fedora. The context is the security (SELinux) context of a running application or service. To get the context of a running application use ps -e --context. Warning: If the context is unconfined, then this will open access for more than the desired application. The lockdown whitelist entries are checked in the following order: 1. context 2. uid 3. user 4. command --list-lockdown-whitelist-commands List all command lines that are on the whitelist. --add-lockdown-whitelist-command=command Add the command to the whitelist. --remove-lockdown-whitelist-command=command Remove the command from the whitelist. --query-lockdown-whitelist-command=command Query whether the command is on the whitelist. Returns 0 if true, 1 otherwise. --list-lockdown-whitelist-contexts List all contexts that are on the whitelist. --add-lockdown-whitelist-context=context Add the context context to the whitelist. --remove-lockdown-whitelist-context=context Remove the context from the whitelist. --query-lockdown-whitelist-context=context Query whether the context is on the whitelist. Returns 0 if true, 1 otherwise. --list-lockdown-whitelist-uids List all user ids that are on the whitelist. --add-lockdown-whitelist-uid=uid Add the user id uid to the whitelist. --remove-lockdown-whitelist-uid=uid Remove the user id uid from the whitelist. --query-lockdown-whitelist-uid=uid Query whether the user id uid is on the whitelist. Returns 0 if true, 1 otherwise. --list-lockdown-whitelist-users List all user names that are on the whitelist. --add-lockdown-whitelist-user=user Add the user name user to the whitelist. --remove-lockdown-whitelist-user=user Remove the user name user from the whitelist. --query-lockdown-whitelist-user=user Query whether the user name user is on the whitelist. Returns 0 if true, 1 otherwise. Policy Options --policy-server Change Polkit actions to 'server' (more restricted) --policy-desktop Change Polkit actions to 'desktop' (less restricted) SEE ALSO firewall-applet(1), firewalld(1), firewall-cmd(1), firewall-config(1), firewalld.conf(5), firewalld.direct(5), firewalld.dbus(5), firewalld.icmptype(5), firewalld.lockdown-whitelist(5), firewall- offline-cmd(1), firewalld.richlanguage(5), firewalld.service(5), firewalld.zone(5), firewalld.zones(5), firewalld.policy(5), firewalld.policies(5), firewalld.ipset(5), firewalld.helper(5) NOTES firewalld home page: http://firewalld.org AUTHORS Thomas Woerner Developer Jiri Popelka Developer Eric Garver Developer firewalld 2.1.2 FIREWALL-OFFLINE-C(1)