|FBDEV(4)||Device Drivers Manual||FBDEV(4)|
Section "Device" Identifier "devname" Driver "fbdev" BusID "pci:bus:dev:func" ... EndSection
For this driver it is not required to specify modes in the screen section of the config file. The fbdev driver can pick up the currently used video mode from the framebuffer driver and will use it if there are no video modes configured.
For PCI boards you might have to add a BusID line to the Device section. See above for a sample line.
The following driver Options are supported:
- Option "fbdev" "string"
- The framebuffer device to use. Default: /dev/fb0.
- Option "ShadowFB" "boolean"
- Enable or disable use of the shadow framebuffer layer. Mandatory for 24bpp framebuffers on newer servers. Default: on.
- Option "Rotate" "string"
- Enable rotation of the display. The supported values are "CW" (clockwise, 90 degrees), "UD" (upside down, 180 degrees) and "CCW" (counter clockwise, 270 degrees). Implies use of the shadow framebuffer layer. Disabled for 24bpp framebuffers. Default: off.
|xf86-video-fbdev 0.5.0||X Version 11|