Overview

A history expansion begins with the first character of the histchars parameter, which is `!' by default, and may occur anywhere on the command line, including inside double quotes (but not inside single quotes '...' or C-style quotes $'...' nor when escaped with a backslash).

The first character is followed by an optional event designator (see the section `Event Designators') and then an optional word designator (the section `Word Designators'); if neither of these designators is present, no history expansion occurs.

Input lines containing history expansions are echoed after being expanded, but before any other expansions take place and before the command is executed. It is this expanded form that is recorded as the history event for later references.

History expansions do not nest.

By default, a history reference with no event designator refers to the same event as any preceding history reference on that command line; if it is the only history reference in a command, it refers to the previous command. However, if the option CSH_JUNKIE_HISTORY is set, then every history reference with no event specification always refers to the previous command.

For example, `!' is the event designator for the previous command, so `!!:1' always refers to the first word of the previous command, and `!!$' always refers to the last word of the previous command. With CSH_JUNKIE_HISTORY set, then `!:1' and `!$' function in the same manner as `!!:1' and `!!$', respectively. Conversely, if CSH_JUNKIE_HISTORY is unset, then `!:1' and `!$' refer to the first and last words, respectively, of the same event referenced by the nearest other history reference preceding them on the current command line, or to the previous command if there is no preceding reference.

The character sequence `^foo^bar' (where `^' is actually the second character of the histchars parameter) repeats the last command, replacing the string foo with bar. More precisely, the sequence `^foo^bar^' is synonymous with `!!:s^foo^bar^', hence other modifiers (see the section `Modifiers') may follow the final `^'. In particular, `^foo^bar^:G' performs a global substitution.

If the shell encounters the character sequence `!"' in the input, the history mechanism is temporarily disabled until the current list (see zshmisc(1)) is fully parsed. The `!"' is removed from the input, and any subsequent `!' characters have no special significance.

A less convenient but more comprehensible form of command history support is provided by the fc builtin.

Event Designators

An event designator is a reference to a command-line entry in the history list. In the list below, remember that the initial `!' in each item may be changed to another character by setting the histchars parameter.

!

Start a history expansion, except when followed by a blank, newline, `=' or `('. If followed immediately by a word designator (see the section `Word Designators'), this forms a history reference with no event designator (see the section `Overview').

!!

Refer to the previous command. By itself, this expansion repeats the previous command.

!n

Refer to command-line n.

!-n

Refer to the current command-line minus n.

!str

Refer to the most recent command starting with str.

!?str[?]

Refer to the most recent command containing str. The trailing `?' is necessary if this reference is to be followed by a modifier or followed by any text that is not to be considered part of str.

!#

Refer to the current command line typed in so far. The line is treated as if it were complete up to and including the word before the one with the `!#' reference.

!{...}

Insulate a history reference from adjacent characters (if necessary).

Word Designators

A word designator indicates which word or words of a given command line are to be included in a history reference. A `:' usually separates the event specification from the word designator. It may be omitted only if the word designator begins with a `^', `$', `*', `-' or `%'. Word designators include:

0

The first input word (command).

n

The nth argument.

^

The first argument. That is, 1.

$

The last argument.

%

The word matched by (the most recent) ?str search.

x-y

A range of words; x defaults to 0.

*

All the arguments, or a null value if there are none.

x*

Abbreviates `x-$'.

x-

Like `x*' but omitting word $.

Note that a `%' word designator works only when used in one of `!%', `!:%' or `!?str?:%', and only when used after a !? expansion (possibly in an earlier command). Anything else results in an error, although the error may not be the most obvious one.

Modifiers

After the optional word designator, you can add a sequence of one or more of the following modifiers, each preceded by a `:'. These modifiers also work on the result of filename generation and parameter expansion, except where noted.

a

Turn a file name into an absolute path: prepends the current directory, if necessary; remove `.' path segments; and remove `..' path segments and the segments that immediately precede them.

A

Turn a file name into an absolute path as the `a' modifier does, and then pass the result through the realpath(3) library function to resolve symbolic links.

c

Resolve a command name into an absolute path by searching the command path given by the PATH variable. This does not work for commands containing directory parts. Note also that this does not usually work as a glob qualifier unless a file of the same name is found in the current directory.

e

Remove all but the part of the filename extension following the `.'; see the definition of the filename extension in the description of the r modifier below. Note that according to that definition the result will be empty if the string ends with a `.'.

h [ digits ]

Remove a trailing pathname component, shortening the path by one directory level: this is the `head' of the pathname. This works like `dirname'. If the h is followed immediately (with no spaces or other separator) by any number of decimal digits, and the value of the resulting number is non-zero, that number of leading components is preserved instead of the final component being removed. In an absolute path the leading `/' is the first component, so, for example, if var=/my/path/to/something, then ${var:h3} substitutes /my/path. Consecutive `/'s are treated the same as a single `/'. In parameter substitution, digits may only be used if the expression is in braces, so for example the short form substitution $var:h2 is treated as ${var:h}2, not as ${var:h2}. No restriction applies to the use of digits in history substitution or globbing qualifiers. If more components are requested than are present, the entire path is substituted (so this does not trigger a `failed modifier' error in history expansion).

l

Convert the words to all lowercase.

p

Print the new command but do not execute it. Only works with history expansion.

P

Turn a file name into an absolute path, like realpath(3). The resulting path will be absolute, will refer to the same directory entry as the input filename, and none of its components will be symbolic links or equal to `.' or `..'.

q

Quote the substituted words, escaping further substitutions. Works with history expansion and parameter expansion, though for parameters it is only useful if the resulting text is to be re-evaluated such as by eval.

Q

Remove one level of quotes from the substituted words.

r

Remove a filename extension leaving the root name. Strings with no filename extension are not altered. A filename extension is a `.' followed by any number of characters (including zero) that are neither `.' nor `/' and that continue to the end of the string. For example, the extension of `foo.orig.c' is `.c', and `dir.c/foo' has no extension.

s/l/r[/]

Substitute r for l as described below. The substitution is done only for the first string that matches l. For arrays and for filename generation, this applies to each word of the expanded text. See below for further notes on substitutions.

&

Repeat the previous s substitution. Like s, may be preceded immediately by a g. In parameter expansion the & must appear inside braces, and in filename generation it must be quoted with a backslash.

t [ digits ]

Remove all leading pathname components, leaving the final component (tail). This works like `basename'. Any trailing slashes are first removed. Decimal digits are handled as described above for (h), but in this case that number of trailing components is preserved instead of the default 1; 0 is treated the same as 1.

u

Convert the words to all uppercase.

x

Like q, but break into words at whitespace. Does not work with parameter expansion.

The s/l/r/ substitution works as follows. By default the left-hand side of substitutions are not patterns, but character strings. Any character can be used as the delimiter in place of `/'. A backslash quotes the delimiter character. The character `&', in the right-hand-side r, is replaced by the text from the left-hand-side l. The `&' can be quoted with a backslash. A null l uses the previous string either from the previous l or from the contextual scan string s from `!?s'. You can omit the rightmost delimiter if a newline immediately follows r; the rightmost `?' in a context scan can similarly be omitted. Note the same record of the last l and r is maintained across all forms of expansion.

Note that if a `&' is used within glob qualifiers an extra backslash is needed as a & is a special character in this case.

Also note that the order of expansions affects the interpretation of l and r. When used in a history expansion, which occurs before any other expansions, l and r are treated as literal strings (except as explained for HIST_SUBST_PATTERN below). When used in parameter expansion, the replacement of r into the parameter's value is done first, and then any additional process, parameter, command, arithmetic, or brace references are applied, which may evaluate those substitutions and expansions more than once if l appears more than once in the starting value. When used in a glob qualifier, any substitutions or expansions are performed once at the time the qualifier is parsed, even before the `:s' expression itself is divided into l and r sides.

If the option HIST_SUBST_PATTERN is set, l is treated as a pattern of the usual form described in the section FILENAME GENERATION below. This can be used in all the places where modifiers are available; note, however, that in globbing qualifiers parameter substitution has already taken place, so parameters in the replacement string should be quoted to ensure they are replaced at the correct time. Note also that complicated patterns used in globbing qualifiers may need the extended glob qualifier notation (#q:s/.../.../) in order for the shell to recognize the expression as a glob qualifier. Further, note that bad patterns in the substitution are not subject to the NO_BAD_PATTERN option so will cause an error.

When HIST_SUBST_PATTERN is set, l may start with a # to indicate that the pattern must match at the start of the string to be substituted, and a % may appear at the start or after an # to indicate that the pattern must match at the end of the string to be substituted. The % or # may be quoted with two backslashes.

For example, the following piece of filename generation code with the EXTENDED_GLOB option:

print -r -- *.c(#q:s/#%(#b)s(*).c/'S${match[1]}.C'/)

takes the expansion of *.c and applies the glob qualifiers in the (#q...) expression, which consists of a substitution modifier anchored to the start and end of each word (#%). This turns on backreferences ((#b)), so that the parenthesised subexpression is available in the replacement string as ${match[1]}. The replacement string is quoted so that the parameter is not substituted before the start of filename generation.

The following f, F, w and W modifiers work only with parameter expansion and filename generation. They are listed here to provide a single point of reference for all modifiers.

f

Repeats the immediately (without a colon) following modifier until the resulting word doesn't change any more.

F:expr:

Like f, but repeats only n times if the expression expr evaluates to n. Any character can be used instead of the `:'; if `(', `[', or `{' is used as the opening delimiter, the closing delimiter should be ')', `]', or `}', respectively.

w

Makes the immediately following modifier work on each word in the string.

W:sep:

Like w but words are considered to be the parts of the string that are separated by sep. Any character can be used instead of the `:'; opening parentheses are handled specially, see above.

Parameter Expansion Flags

If the opening brace is directly followed by an opening parenthesis, the string up to the matching closing parenthesis will be taken as a list of flags. In cases where repeating a flag is meaningful, the repetitions need not be consecutive; for example, `(q%q%q)' means the same thing as the more readable `(%%qqq)'. The following flags are supported:

#

Evaluate the resulting words as numeric expressions and interpret these as character codes. Output the corresponding characters. Note that this form is entirely distinct from use of the # without parentheses.

%

Expand all % escapes in the resulting words in the same way as in prompts (see EXPANSION OF PROMPT SEQUENCES in zshmisc(1)). If this flag is given twice, full prompt expansion is done on the resulting words, depending on the setting of the PROMPT_PERCENT, PROMPT_SUBST and PROMPT_BANG options.

@

In double quotes, array elements are put into separate words. E.g., `"${(@)foo}"' is equivalent to `"${foo[@]}"' and `"${(@)foo[1,2]}"' is the same as `"$foo[1]" "$foo[2]"'. This is distinct from field splitting by the f, s or z flags, which still applies within each array element.

A

Convert the substitution into an array expression, even if it otherwise would be scalar. This has lower precedence than subscripting, so one level of nested expansion is required in order that subscripts apply to array elements. Thus ${${(A)name}[1]} yields the full value of name when name is scalar.

a

Sort in array index order; when combined with `O' sort in reverse array index order. Note that `a' is therefore equivalent to the default but `Oa' is useful for obtaining an array's elements in reverse order.

b

Quote with backslashes only characters that are special to pattern matching. This is useful when the contents of the variable are to be tested using GLOB_SUBST, including the ${~...} switch.

pattern=${(q)str}
[[ $str = ${~pattern} ]]

pattern=${(b)str}
[[ $str = ${~pattern} ]]

c

With ${#name}, count the total number of characters in an array, as if the elements were concatenated with spaces between them. This is not a true join of the array, so other expressions used with this flag may have an effect on the elements of the array before it is counted.

C

Capitalize the resulting words. `Words' in this case refers to sequences of alphanumeric characters separated by non-alphanumerics, not to words that result from field splitting.

D

Assume the string or array elements contain directories and attempt to substitute the leading part of these by names. The remainder of the path (the whole of it if the leading part was not substituted) is then quoted so that the whole string can be used as a shell argument. This is the reverse of `~' substitution: see the section FILENAME EXPANSION below.

e

Perform single word shell expansions, namely parameter expansion, command substitution and arithmetic expansion, on the result. Such expansions can be nested but too deep recursion may have unpredictable effects.

f

Split the result of the expansion at newlines. This is a shorthand for `ps:\n:'.

F

Join the words of arrays together using newline as a separator. This is a shorthand for `pj:\n:'.

g:opts:

Process escape sequences like the echo builtin when no options are given (g::). With the o option, octal escapes don't take a leading zero. With the c option, sequences like `^X' are also processed. With the e option, processes `\M-t' and similar sequences like the print builtin. With both of the o and e options, behaves like the print builtin except that in none of these modes is `\c' interpreted.

i

Sort case-insensitively. May be combined with `n' or `O'.

k

If name refers to an associative array, substitute the keys (element names) rather than the values of the elements. Used with subscripts (including ordinary arrays), force indices or keys to be substituted even if the subscript form refers to values. However, this flag may not be combined with subscript ranges. With the KSH_ARRAYS option a subscript `[*]' or `[@]' is needed to operate on the whole array, as usual.

L

Convert all letters in the result to lower case.

n

Sort decimal integers numerically; if the first differing characters of two test strings are not digits, sorting is lexical. `+' and `-' are not treated specially; they are treated as any other non-digit. Integers with more initial zeroes are sorted before those with fewer or none. Hence the array `foo+24 foo1 foo02 foo2 foo3 foo20 foo23' is sorted into the order shown. May be combined with `i' or `O'.

-

As n, but a leading minus sign indicates a negative decimal integer. A leading minus sign not followed by an integer does not trigger numeric sorting. Note that `+' signs are not handled specially (this may change in the future).

o

Sort the resulting words in ascending order; if this appears on its own the sorting is lexical and case-sensitive (unless the locale renders it case-insensitive). Sorting in ascending order is the default for other forms of sorting, so this is ignored if combined with `a', `i', `n' or `-'.

O

Sort the resulting words in descending order; `O' without `a', `i', `n' or `-' sorts in reverse lexical order. May be combined with `a', `i', `n' or `-' to reverse the order of sorting.

P

This forces the value of the parameter name to be interpreted as a further parameter name, whose value will be used where appropriate. Note that flags set with one of the typeset family of commands (in particular case transformations) are not applied to the value of name used in this fashion.

q

Quote characters that are special to the shell in the resulting words with backslashes; unprintable or invalid characters are quoted using the $'\NNN' form, with separate quotes for each octet.

Q

Remove one level of quotes from the resulting words.

t

Use a string describing the type of the parameter where the value of the parameter would usually appear. This string consists of keywords separated by hyphens (`-'). The first keyword in the string describes the main type, it can be one of `scalar', `array', `integer', `float' or `association'. The other keywords describe the type in more detail:

u

Expand only the first occurrence of each unique word.

U

Convert all letters in the result to upper case.

v

Used with k, substitute (as two consecutive words) both the key and the value of each associative array element. Used with subscripts, force values to be substituted even if the subscript form refers to indices or keys.

V

Make any special characters in the resulting words visible.

w

With ${#name}, count words in arrays or strings; the s flag may be used to set a word delimiter.

W

Similar to w with the difference that empty words between repeated delimiters are also counted.

X

With this flag, parsing errors occurring with the Q, e and # flags or the pattern matching forms such as `${name#pattern}' are reported. Without the flag, errors are silently ignored.

z

Split the result of the expansion into words using shell parsing to find the words, i.e. taking into account any quoting in the value. Comments are not treated specially but as ordinary strings, similar to interactive shells with the INTERACTIVE_COMMENTS option unset (however, see the Z flag below for related options)

0

Split the result of the expansion on null bytes. This is a shorthand for `ps:\0:'.

The following flags (except p) are followed by one or more arguments as shown. Any character, or the matching pairs `(...)', `{...}', `[...]', or `<...>', may be used in place of a colon as delimiters, but note that when a flag takes more than one argument, a matched pair of delimiters must surround each argument.

p

Recognize the same escape sequences as the print builtin in string arguments to any of the flags described below that follow this argument.

sep=:
val=a:b:c
print ${(ps.$sep.)val}

~

Strings inserted into the expansion by any of the flags below are to be treated as patterns. This applies to the string arguments of flags that follow ~ within the same set of parentheses. Compare with ~ outside parentheses, which forces the entire substituted string to be treated as a pattern. Hence, for example,

[[ "?" = ${(~j.|.)array} ]]

j:string:

Join the words of arrays together using string as a separator. Note that this occurs before field splitting by the s:string: flag or the SH_WORD_SPLIT option.

l:expr::string1::string2:

Pad the resulting words on the left. Each word will be truncated if required and placed in a field expr characters wide.

m

Only useful together with one of the flags l or r or with the # length operator when the MULTIBYTE option is in effect. Use the character width reported by the system in calculating how much of the string it occupies or the overall length of the string. Most printable characters have a width of one unit, however certain Asian character sets and certain special effects use wider characters; combining characters have zero width. Non-printable characters are arbitrarily counted as zero width; how they would actually be displayed will vary.

r:expr::string1::string2:

As l, but pad the words on the right and insert string2 immediately to the right of the string to be padded.

s:string:

Force field splitting at the separator string. Note that a string of two or more characters means that all of them must match in sequence; this differs from the treatment of two or more characters in the IFS parameter. See also the = flag and the SH_WORD_SPLIT option. An empty string may also be given in which case every character will be a separate element.

line="one::three"
print -l "${(s.:.)line}"

Z:opts:

As z but takes a combination of option letters between a following pair of delimiter characters. With no options the effect is identical to z. The following options are available:

_:flags:

The underscore (_) flag is reserved for future use. As of this revision of zsh, there are no valid flags; anything following an underscore, other than an empty pair of delimiters, is treated as an error, and the flag itself has no effect.

The following flags are meaningful with the ${...#...} or ${...%...} forms. The S, I, and * flags may also be used with the ${.../...} forms.

S

With # or ##, search for the match that starts closest to the start of the string (a `substring match'). Of all matches at a particular position, # selects the shortest and ## the longest:

% str="aXbXc"
% echo ${(S)str#X*}
abXc
% echo ${(S)str##X*}
a
% 

% str="aXbXc"
% echo ${(S)str%X*}
aXbc
% echo ${(S)str%%X*}
aXb
% 

% str="abab"
% echo ${str/*b/_}
_
% echo ${(S)str/*b/_}
_ab
% 

I:expr:

Search the exprth match (where expr evaluates to a number). This only applies when searching for substrings, either with the S flag, or with ${.../...} (only the exprth match is substituted) or ${...//...} (all matches from the exprth on are substituted). The default is to take the first match.

which switch is the right switch for Ipswich?

*

Enable EXTENDED_GLOB for substitution via ${.../...} or ${...//...}. Note that `**' does not disable extendedglob.

B

Include the index of the beginning of the match in the result.

E

Include the index one character past the end of the match in the result (note this is inconsistent with other uses of parameter index).

M

Include the matched portion in the result.

N

Include the length of the match in the result.

R

Include the unmatched portion in the result (the Rest).

Rules

Here is a summary of the rules for substitution; this assumes that braces are present around the substitution, i.e. ${...}. Some particular examples are given below. Note that the Zsh Development Group accepts no responsibility for any brain damage which may occur during the reading of the following rules.

1. Nested substitution

If multiple nested ${...} forms are present, substitution is performed from the inside outwards. At each level, the substitution takes account of whether the current value is a scalar or an array, whether the whole substitution is in double quotes, and what flags are supplied to the current level of substitution, just as if the nested substitution were the outermost. The flags are not propagated up to enclosing substitutions; the nested substitution will return either a scalar or an array as determined by the flags, possibly adjusted for quoting. All the following steps take place where applicable at all levels of substitution.

2. Internal parameter flags

Any parameter flags set by one of the typeset family of commands, in particular the -L, -R, -Z, -u and -l options for padding and capitalization, are applied directly to the parameter value. Note these flags are options to the command, e.g. `typeset -Z'; they are not the same as the flags used within parameter substitutions.

3. Parameter subscripting

If the value is a raw parameter reference with a subscript, such as ${var[3]}, the effect of subscripting is applied directly to the parameter. Subscripts are evaluated left to right; subsequent subscripts apply to the scalar or array value yielded by the previous subscript. Thus if var is an array, ${var[1][2]} is the second character of the first word, but ${var[2,4][2]} is the entire third word (the second word of the range of words two through four of the original array). Any number of subscripts may appear. Flags such as `(k)' and `(v)' which alter the result of subscripting are applied.

4. Parameter name replacement

At the outermost level of nesting only, the `(P)' flag is applied. This treats the value so far as a parameter name (which may include a subscript expression) and replaces that with the corresponding value. This replacement occurs later if the `(P)' flag appears in a nested substitution.

5. Double-quoted joining

If the value after this process is an array, and the substitution appears in double quotes, and neither an `(@)' flag nor a `#' length operator is present at the current level, then words of the value are joined with the first character of the parameter $IFS, by default a space, between each word (single word arrays are not modified). If the `(j)' flag is present, that is used for joining instead of $IFS.

6. Nested subscripting

Any remaining subscripts (i.e. of a nested substitution) are evaluated at this point, based on whether the value is an array or a scalar. As with 3., multiple subscripts can appear. Note that ${foo[2,4][2]} is thus equivalent to ${${foo[2,4]}[2]} and also to "${${(@)foo[2,4]}[2]}" (the nested substitution returns an array in both cases), but not to "${${foo[2,4]}[2]}" (the nested substitution returns a scalar because of the quotes).

7. Modifiers

Any modifiers, as specified by a trailing `#', `%', `/' (possibly doubled) or by a set of modifiers of the form `:...' (see the section `Modifiers' in the section `History Expansion'), are applied to the words of the value at this level.

8. Character evaluation

Any `(#)' flag is applied, evaluating the result so far numerically as a character.

9. Length

Any initial `#' modifier, i.e. in the form ${#var}, is used to evaluate the length of the expression so far.

10. Forced joining

If the `(j)' flag is present, or no `(j)' flag is present but the string is to be split as given by rule 11., and joining did not take place at rule 5., any words in the value are joined together using the given string or the first character of $IFS if none. Note that the `(F)' flag implicitly supplies a string for joining in this manner.

11. Simple word splitting

If one of the `(s)' or `(f)' flags are present, or the `=' specifier was present (e.g. ${=var}), the word is split on occurrences of the specified string, or (for = with neither of the two flags present) any of the characters in $IFS.

12. Case modification

Any case modification from one of the flags `(L)', `(U)' or `(C)' is applied.

13. Escape sequence replacement

First any replacements from the `(g)' flag are performed, then any prompt-style formatting from the `(%)' family of flags is applied.

14. Quote application

Any quoting or unquoting using `(q)' and `(Q)' and related flags is applied.

15. Directory naming

Any directory name substitution using `(D)' flag is applied.

16. Visibility enhancement

Any modifications to make characters visible using the `(V)' flag are applied.

17. Lexical word splitting

If the '(z)' flag or one of the forms of the '(Z)' flag is present, the word is split as if it were a shell command line, so that quotation marks and other metacharacters are used to decide what constitutes a word. Note this form of splitting is entirely distinct from that described by rule 11.: it does not use $IFS, and does not cause forced joining.

18. Uniqueness

If the result is an array and the `(u)' flag was present, duplicate elements are removed from the array.

19. Ordering

If the result is still an array and one of the `(o)' or `(O)' flags was present, the array is reordered.

20. RC_EXPAND_PARAM

At this point the decision is made whether any resulting array elements are to be combined element by element with surrounding text, as given by either the RC_EXPAND_PARAM option or the `^' flag.

21. Re-evaluation

Any `(e)' flag is applied to the value, forcing it to be re-examined for new parameter substitutions, but also for command and arithmetic substitutions.

22. Padding

Any padding of the value by the `(l.fill.)' or `(r.fill.)' flags is applied.

23. Semantic joining

In contexts where expansion semantics requires a single word to result, all words are rejoined with the first character of IFS between. So in `${(P)${(f)lines}}' the value of ${lines} is split at newlines, but then must be joined again before the `(P)' flag can be applied.

24. Empty argument removal

If the substitution does not appear in double quotes, any resulting zero-length argument, whether from a scalar or an element of an array, is elided from the list of arguments inserted into the command line.

25. Nested parameter name replacement

If the `(P)' flag is present and rule 4. has not applied, the value so far is treated as a parameter name (which may include a subscript expression) and replaced with the corresponding value, with internal flags (rule 2.) applied to the new value.

Examples

The flag f is useful to split a double-quoted substitution line by line. For example, ${(f)"$(<file)"} substitutes the contents of file divided so that each line is an element of the resulting array. Compare this with the effect of $(<file) alone, which divides the file up by words, or the same inside double quotes, which makes the entire content of the file a single string.

The following illustrates the rules for nested parameter expansions. Suppose that $foo contains the array (bar baz):

"${(@)${foo}[1]}"

This produces the result b. First, the inner substitution "${foo}", which has no array (@) flag, produces a single word result "bar baz". The outer substitution "${(@)...[1]}" detects that this is a scalar, so that (despite the `(@)' flag) the subscript picks the first character.

"${${(@)foo}[1]}"

This produces the result `bar'. In this case, the inner substitution "${(@)foo}" produces the array `(bar baz)'. The outer substitution "${...[1]}" detects that this is an array and picks the first word. This is similar to the simple case "${foo[1]}".

As an example of the rules for word splitting and joining, suppose $foo contains the array `(ax1 bx1)'. Then

${(s/x/)foo}

produces the words `a', `1 b' and `1'.

${(j/x/s/x/)foo}

produces `a', `1', `b' and `1'.

${(s/x/)foo%%1*}

produces `a' and ` b' (note the extra space). As substitution occurs before either joining or splitting, the operation first generates the modified array (ax bx), which is joined to give "ax bx", and then split to give `a', ` b' and `'. The final empty string will then be elided, as it is not in double quotes.

Dynamic named directories

If the function zsh_directory_name exists, or the shell variable zsh_directory_name_functions exists and contains an array of function names, then the functions are used to implement dynamic directory naming. The functions are tried in order until one returns status zero, so it is important that functions test whether they can handle the case in question and return an appropriate status.

A `~' followed by a string namstr in unquoted square brackets is treated specially as a dynamic directory name. Note that the first unquoted closing square bracket always terminates namstr. The shell function is passed two arguments: the string n (for name) and namstr. It should either set the array reply to a single element which is the directory corresponding to the name and return status zero (executing an assignment as the last statement is usually sufficient), or it should return status non-zero. In the former case the element of reply is used as the directory; in the latter case the substitution is deemed to have failed. If all functions fail and the option NOMATCH is set, an error results.

The functions defined as above are also used to see if a directory can be turned into a name, for example when printing the directory stack or when expanding %~ in prompts. In this case each function is passed two arguments: the string d (for directory) and the candidate for dynamic naming. The function should either return non-zero status, if the directory cannot be named by the function, or it should set the array reply to consist of two elements: the first is the dynamic name for the directory (as would appear within `~[...]'), and the second is the prefix length of the directory to be replaced. For example, if the trial directory is /home/myname/src/zsh and the dynamic name for /home/myname/src (which has 16 characters) is s, then the function sets

reply=(s 16)

The directory name so returned is compared with possible static names for parts of the directory path, as described below; it is used if the prefix length matched (16 in the example) is longer than that matched by any static name.

It is not a requirement that a function implements both n and d calls; for example, it might be appropriate for certain dynamic forms of expansion not to be contracted to names. In that case any call with the first argument d should cause a non-zero status to be returned.

The completion system calls `zsh_directory_name c' followed by equivalent calls to elements of the array zsh_directory_name_functions, if it exists, in order to complete dynamic names for directories. The code for this should be as for any other completion function as described in zshcompsys(1).

As a working example, here is a function that expands any dynamic names beginning with the string p: to directories below /home/pws/perforce. In this simple case a static name for the directory would be just as effective.

zsh_directory_name() {
  emulate -L zsh
  setopt extendedglob
  local -a match mbegin mend
  if [[ $1 = d ]]; then
    # turn the directory into a name
    if [[ $2 = (#b)(/home/pws/perforce/)([^/]##)* ]]; then
      typeset -ga reply
      reply=(p:$match[2] $(( ${#match[1]} + ${#match[2]} )) )
    else
      return 1
    fi
  elif [[ $1 = n ]]; then
    # turn the name into a directory
    [[ $2 != (#b)p:(?*) ]] && return 1
    typeset -ga reply
    reply=(/home/pws/perforce/$match[1])
  elif [[ $1 = c ]]; then
    # complete names
    local expl
    local -a dirs
    dirs=(/home/pws/perforce/*(/:t))
    dirs=(p:${^dirs})
    _wanted dynamic-dirs expl 'dynamic directory' compadd -S\] -a dirs
    return
  else
    return 1
  fi
  return 0
}

Static named directories

A `~' followed by anything not already covered consisting of any number of alphanumeric characters or underscore (`_'), hyphen (`-'), or dot (`.') is looked up as a named directory, and replaced by the value of that named directory if found. Named directories are typically home directories for users on the system. They may also be defined if the text after the `~' is the name of a string shell parameter whose value begins with a `/'. Note that trailing slashes will be removed from the path to the directory (though the original parameter is not modified).

It is also possible to define directory names using the -d option to the hash builtin.

When the shell prints a path (e.g. when expanding %~ in prompts or when printing the directory stack), the path is checked to see if it has a named directory as its prefix. If so, then the prefix portion is replaced with a `~' followed by the name of the directory. The shorter of the two ways of referring to the directory is used, i.e. either the directory name or the full path; the name is used if they are the same length. The parameters $PWD and $OLDPWD are never abbreviated in this fashion.

`=' expansion

If a word begins with an unquoted `=' and the EQUALS option is set, the remainder of the word is taken as the name of a command. If a command exists by that name, the word is replaced by the full pathname of the command.

Notes

Filename expansion is performed on the right hand side of a parameter assignment, including those appearing after commands of the typeset family. In this case, the right hand side will be treated as a colon-separated list in the manner of the PATH parameter, so that a `~' or an `=' following a `:' is eligible for expansion. All such behaviour can be disabled by quoting the `~', the `=', or the whole expression (but not simply the colon); the EQUALS option is also respected.

If the option MAGIC_EQUAL_SUBST is set, any unquoted shell argument in the form `identifier=expression' becomes eligible for file expansion as described in the previous paragraph. Quoting the first `=' also inhibits this.

Glob Operators

*

Matches any string, including the null string.

?

Matches any character.

[...]

Matches any of the enclosed characters. Ranges of characters can be specified by separating two characters by a `-'. A `-' or `]' may be matched by including it as the first character in the list. There are also several named classes of characters, in the form `[:name:]' with the following meanings. The first set use the macros provided by the operating system to test for the given character combinations, including any modifications due to local language settings, see ctype(3):

[^...]

[!...]

Like [...], except that it matches any character which is not in the given set.

<[x]-[y]>

Matches any number in the range x to y, inclusive. Either of the numbers may be omitted to make the range open-ended; hence `<->' matches any number. To match individual digits, the [...] form is more efficient.

(...)

Matches the enclosed pattern. This is used for grouping. If the KSH_GLOB option is set, then a `@', `*', `+', `?' or `!' immediately preceding the `(' is treated specially, as detailed below. The option SH_GLOB prevents bare parentheses from being used in this way, though the KSH_GLOB option is still available.

x|y

Matches either x or y. This operator has lower precedence than any other. The `|' character must be within parentheses, to avoid interpretation as a pipeline. The alternatives are tried in order from left to right.

^x

(Requires EXTENDED_GLOB to be set.) Matches anything except the pattern x. This has a higher precedence than `/', so `^foo/bar' will search directories in `.' except `./foo' for a file named `bar'.

x~y

(Requires EXTENDED_GLOB to be set.) Match anything that matches the pattern x but does not match y. This has lower precedence than any operator except `|', so `*/*~foo/bar' will search for all files in all directories in `.' and then exclude `foo/bar' if there was such a match. Multiple patterns can be excluded by `foo~bar~baz'. In the exclusion pattern (y), `/' and `.' are not treated specially the way they usually are in globbing.

x#

(Requires EXTENDED_GLOB to be set.) Matches zero or more occurrences of the pattern x. This operator has high precedence; `12#' is equivalent to `1(2#)', rather than `(12)#'. It is an error for an unquoted `#' to follow something which cannot be repeated; this includes an empty string, a pattern already followed by `##', or parentheses when part of a KSH_GLOB pattern (for example, `!(foo)#' is invalid and must be replaced by `*(!(foo))').

x##

(Requires EXTENDED_GLOB to be set.) Matches one or more occurrences of the pattern x. This operator has high precedence; `12##' is equivalent to `1(2##)', rather than `(12)##'. No more than two active `#' characters may appear together. (Note the potential clash with glob qualifiers in the form `1(2##)' which should therefore be avoided.)

ksh-like Glob Operators

If the KSH_GLOB option is set, the effects of parentheses can be modified by a preceding `@', `*', `+', `?' or `!'. This character need not be unquoted to have special effects, but the `(' must be.

@(...)

Match the pattern in the parentheses. (Like `(...)'.)

*(...)

Match any number of occurrences. (Like `(...)#', except that recursive directory searching is not supported.)

+(...)

Match at least one occurrence. (Like `(...)##', except that recursive directory searching is not supported.)

?(...)

Match zero or one occurrence. (Like `(|...)'.)

!(...)

Match anything but the expression in parentheses. (Like `(^(...))'.)

Precedence

The precedence of the operators given above is (highest) `^', `/', `~', `|' (lowest); the remaining operators are simply treated from left to right as part of a string, with `#' and `##' applying to the shortest possible preceding unit (i.e. a character, `?', `[...]', `<...>', or a parenthesised expression). As mentioned above, a `/' used as a directory separator may not appear inside parentheses, while a `|' must do so; in patterns used in other contexts than filename generation (for example, in case statements and tests within `[[...]]'), a `/' is not special; and `/' is also not special after a `~' appearing outside parentheses in a filename pattern.

Globbing Flags

There are various flags which affect any text to their right up to the end of the enclosing group or to the end of the pattern; they require the EXTENDED_GLOB option. All take the form (#X) where X may have one of the following forms:

i

Case insensitive: upper or lower case characters in the pattern match upper or lower case characters.

l

Lower case characters in the pattern match upper or lower case characters; upper case characters in the pattern still only match upper case characters.

I

Case sensitive: locally negates the effect of i or l from that point on.

b

Activate backreferences for parenthesised groups in the pattern; this does not work in filename generation. When a pattern with a set of active parentheses is matched, the strings matched by the groups are stored in the array $match, the indices of the beginning of the matched parentheses in the array $mbegin, and the indices of the end in the array $mend, with the first element of each array corresponding to the first parenthesised group, and so on. These arrays are not otherwise special to the shell. The indices use the same convention as does parameter substitution, so that elements of $mend and $mbegin may be used in subscripts; the KSH_ARRAYS option is respected. Sets of globbing flags are not considered parenthesised groups; only the first nine active parentheses can be referenced.

foo="a_string_with_a_message"
if [[ $foo = (a|an)_(#b)(*) ]]; then
  print ${foo[$mbegin[1],$mend[1]]}
fi

B

Deactivate backreferences, negating the effect of the b flag from that point on.

cN,M

The flag (#cN,M) can be used anywhere that the # or ## operators can be used except in the expressions `(*/)#' and `(*/)##' in filename generation, where `/' has special meaning; it cannot be combined with other globbing flags and a bad pattern error occurs if it is misplaced. It is equivalent to the form {N,M} in regular expressions. The previous character or group is required to match between N and M times, inclusive. The form (#cN) requires exactly N matches; (#c,M) is equivalent to specifying N as 0; (#cN,) specifies that there is no maximum limit on the number of matches.

m

Set references to the match data for the entire string matched; this is similar to backreferencing and does not work in filename generation. The flag must be in effect at the end of the pattern, i.e. not local to a group. The parameters $MATCH, $MBEGIN and $MEND will be set to the string matched and to the indices of the beginning and end of the string, respectively. This is most useful in parameter substitutions, as otherwise the string matched is obvious.

arr=(veldt jynx grimps waqf zho buck)
print ${arr//(#m)[aeiou]/${(U)MATCH}}

M

Deactivate the m flag, hence no references to match data will be created.

anum

Approximate matching: num errors are allowed in the string matched by the pattern. The rules for this are described in the next subsection.

s, e

Unlike the other flags, these have only a local effect, and each must appear on its own: `(#s)' and `(#e)' are the only valid forms. The `(#s)' flag succeeds only at the start of the test string, and the `(#e)' flag succeeds only at the end of the test string; they correspond to `^' and `$' in standard regular expressions. They are useful for matching path segments in patterns other than those in filename generation (where path segments are in any case treated separately). For example, `*((#s)|/)test((#e)|/)*' matches a path segment `test' in any of the following strings: test, test/at/start, at/end/test, in/test/middle.

q

A `q' and everything up to the closing parenthesis of the globbing flags are ignored by the pattern matching code. This is intended to support the use of glob qualifiers, see below. The result is that the pattern `(#b)(*).c(#q.)' can be used both for globbing and for matching against a string. In the former case, the `(#q.)' will be treated as a glob qualifier and the `(#b)' will not be useful, while in the latter case the `(#b)' is useful for backreferences and the `(#q.)' will be ignored. Note that colon modifiers in the glob qualifiers are also not applied in ordinary pattern matching.

u

Respect the current locale in determining the presence of multibyte characters in a pattern, provided the shell was compiled with MULTIBYTE_SUPPORT. This overrides the MULTIBYTE option; the default behaviour is taken from the option. Compare U. (Mnemonic: typically multibyte characters are from Unicode in the UTF-8 encoding, although any extension of ASCII supported by the system library may be used.)

U

All characters are considered to be a single byte long. The opposite of u. This overrides the MULTIBYTE option.

For example, the test string fooxx can be matched by the pattern (#i)FOOXX, but not by (#l)FOOXX, (#i)FOO(#I)XX or ((#i)FOOX)X. The string (#ia2)readme specifies case-insensitive matching of readme with up to two errors.

When using the ksh syntax for grouping both KSH_GLOB and EXTENDED_GLOB must be set and the left parenthesis should be preceded by @. Note also that the flags do not affect letters inside [...] groups, in other words (#i)[a-z] still matches only lowercase letters. Finally, note that when examining whole paths case-insensitively every directory must be searched for all files which match, so that a pattern of the form (#i)/foo/bar/... is potentially slow.

Approximate Matching

When matching approximately, the shell keeps a count of the errors found, which cannot exceed the number specified in the (#anum) flags. Four types of error are recognised:

1.

Different characters, as in fooxbar and fooybar.

2.

Transposition of characters, as in banana and abnana.

3.

A character missing in the target string, as with the pattern road and target string rod.

4.

An extra character appearing in the target string, as with stove and strove.

Thus, the pattern (#a3)abcd matches dcba, with the errors occurring by using the first rule twice and the second once, grouping the string as [d][cb][a] and [a][bc][d].

Non-literal parts of the pattern must match exactly, including characters in character ranges: hence (#a1)??? matches strings of length four, by applying rule 4 to an empty part of the pattern, but not strings of length two, since all the ? must match. Other characters which must match exactly are initial dots in filenames (unless the GLOB_DOTS option is set), and all slashes in filenames, so that a/bc is two errors from ab/c (the slash cannot be transposed with another character). Similarly, errors are counted separately for non-contiguous strings in the pattern, so that (ab|cd)ef is two errors from aebf.

When using exclusion via the ~ operator, approximate matching is treated entirely separately for the excluded part and must be activated separately. Thus, (#a1)README~READ_ME matches READ.ME but not READ_ME, as the trailing READ_ME is matched without approximation. However, (#a1)README~(#a1)READ_ME does not match any pattern of the form READ?ME as all such forms are now excluded.

Apart from exclusions, there is only one overall error count; however, the maximum errors allowed may be altered locally, and this can be delimited by grouping. For example, (#a1)cat((#a0)dog)fox allows one error in total, which may not occur in the dog section, and the pattern (#a1)cat(#a0)dog(#a1)fox is equivalent. Note that the point at which an error is first found is the crucial one for establishing whether to use approximation; for example, (#a1)abc(#a0)xyz will not match abcdxyz, because the error occurs at the `x', where approximation is turned off.

Entire path segments may be matched approximately, so that `(#a1)/foo/d/is/available/at/the/bar' allows one error in any path segment. This is much less efficient than without the (#a1), however, since every directory in the path must be scanned for a possible approximate match. It is best to place the (#a1) after any path segments which are known to be correct.

Recursive Globbing

A pathname component of the form `(foo/)#' matches a path consisting of zero or more directories matching the pattern foo.

As a shorthand, `**/' is equivalent to `(*/)#'; note that this therefore matches files in the current directory as well as subdirectories. Thus:

ls -ld -- (*/)#bar

or

ls -ld -- **/bar

does a recursive directory search for files named `bar' (potentially including the file `bar' in the current directory). This form does not follow symbolic links; the alternative form `***/' does, but is otherwise identical. Neither of these can be combined with other forms of globbing within the same path segment; in that case, the `*' operators revert to their usual effect.

Even shorter forms are available when the option GLOB_STAR_SHORT is set. In that case if no / immediately follows a ** or *** they are treated as if both a / plus a further * are present. Hence:

setopt GLOBSTARSHORT
ls -ld -- **.c

is equivalent to

ls -ld -- **/*.c

Glob Qualifiers

Patterns used for filename generation may end in a list of qualifiers enclosed in parentheses. The qualifiers specify which filenames that otherwise match the given pattern will be inserted in the argument list.

If the option BARE_GLOB_QUAL is set, then a trailing set of parentheses containing no `|' or `(' characters (or `~' if it is special) is taken as a set of glob qualifiers. A glob subexpression that would normally be taken as glob qualifiers, for example `(^x)', can be forced to be treated as part of the glob pattern by doubling the parentheses, in this case producing `((^x))'.

If the option EXTENDED_GLOB is set, a different syntax for glob qualifiers is available, namely `(#qx)' where x is any of the same glob qualifiers used in the other format. The qualifiers must still appear at the end of the pattern. However, with this syntax multiple glob qualifiers may be chained together. They are treated as a logical AND of the individual sets of flags. Also, as the syntax is unambiguous, the expression will be treated as glob qualifiers just as long any parentheses contained within it are balanced; appearance of `|', `(' or `~' does not negate the effect. Note that qualifiers will be recognised in this form even if a bare glob qualifier exists at the end of the pattern, for example `*(#q*)(.)' will recognise executable regular files if both options are set; however, mixed syntax should probably be avoided for the sake of clarity. Note that within conditions using the `[[' form the presence of a parenthesised expression (#q...) at the end of a string indicates that globbing should be performed; the expression may include glob qualifiers, but it is also valid if it is simply (#q). This does not apply to the right hand side of pattern match operators as the syntax already has special significance.

A qualifier may be any one of the following:

/

directories

F

`full' (i.e. non-empty) directories. Note that the opposite sense (^F) expands to empty directories and all non-directories. Use (/^F) for empty directories.

.

plain files

@

symbolic links

=

sockets

p

named pipes (FIFOs)

*

executable plain files (0100 or 0010 or 0001)

%

device files (character or block special)

%b

block special files

%c

character special files

r

owner-readable files (0400)

w

owner-writable files (0200)

x

owner-executable files (0100)

A

group-readable files (0040)

I

group-writable files (0020)

E

group-executable files (0010)

R

world-readable files (0004)

W

world-writable files (0002)

X

world-executable files (0001)

s

setuid files (04000)

S

setgid files (02000)

t

files with the sticky bit (01000)

fspec

files with access rights matching spec. This spec may be a octal number optionally preceded by a `=', a `+', or a `-'. If none of these characters is given, the behavior is the same as for `='. The octal number describes the mode bits to be expected, if combined with a `=', the value given must match the file-modes exactly, with a `+', at least the bits in the given number must be set in the file-modes, and with a `-', the bits in the number must not be set. Giving a `?' instead of a octal digit anywhere in the number ensures that the corresponding bits in the file-modes are not checked, this is only useful in combination with `='.

estring

+cmd

The string will be executed as shell code. The filename will be included in the list if and only if the code returns a zero status (usually the status of the last command).

nt() { [[ $REPLY -nt $NTREF ]] }
NTREF=reffile
ls -ld -- *(+nt)

ddev

files on the device dev

l[-|+]ct

files having a link count less than ct (-), greater than ct (+), or equal to ct

U

files owned by the effective user ID

G

files owned by the effective group ID

uid

files owned by user ID id if that is a number. Otherwise, id specifies a user name: the character after the `u' will be taken as a separator and the string between it and the next matching separator will be taken as a user name. The starting separators `[', `{', and `<' match the final separators `]', `}', and `>', respectively; any other character matches itself. The selected files are those owned by this user. For example, `u:foo:' or `u[foo]' selects files owned by user `foo'.

gid

like uid but with group IDs or names

a[Mwhms][-|+]n

files accessed exactly n days ago. Files accessed within the last n days are selected using a negative value for n (-n). Files accessed more than n days ago are selected by a positive n value (+n). Optional unit specifiers `M', `w', `h', `m' or `s' (e.g. `ah5') cause the check to be performed with months (of 30 days), weeks, hours, minutes or seconds instead of days, respectively. An explicit `d' for days is also allowed.

m[Mwhms][-|+]n

like the file access qualifier, except that it uses the file modification time.

c[Mwhms][-|+]n

like the file access qualifier, except that it uses the file inode change time.

L[+|-]n

files less than n bytes (-), more than n bytes (+), or exactly n bytes in length.

^

negates all qualifiers following it

-

toggles between making the qualifiers work on symbolic links (the default) and the files they point to, if any; any symbolic link for whose target the `stat' system call fails (whatever the cause of the failure) is treated as a file in its own right

M

sets the MARK_DIRS option for the current pattern

T

appends a trailing qualifier mark to the filenames, analogous to the LIST_TYPES option, for the current pattern (overrides M)

N

sets the NULL_GLOB option for the current pattern

D

sets the GLOB_DOTS option for the current pattern

n

sets the NUMERIC_GLOB_SORT option for the current pattern

Yn

enables short-circuit mode: the pattern will expand to at most n filenames. If more than n matches exist, only the first n matches in directory traversal order will be considered.

oc

specifies how the names of the files should be sorted. The following values of c sort in the following ways:

Oc

like `o', but sorts in descending order; i.e. `*(^oc)' is the same as `*(Oc)' and `*(^Oc)' is the same as `*(oc)'; `Od' puts files in the current directory before those in subdirectories at each level of the search.

[beg[,end]]

specifies which of the matched filenames should be included in the returned list. The syntax is the same as for array subscripts. beg and the optional end may be mathematical expressions. As in parameter subscripting they may be negative to make them count from the last match backward. E.g.: `*(-OL[1,3])' gives a list of the names of the three largest files.

Pstring

The string will be prepended to each glob match as a separate word. string is delimited in the same way as arguments to the e glob qualifier described above. The qualifier can be repeated; the words are prepended separately so that the resulting command line contains the words in the same order they were given in the list of glob qualifiers.

More than one of these lists can be combined, separated by commas. The whole list matches if at least one of the sublists matches (they are `or'ed, the qualifiers in the sublists are `and'ed). Some qualifiers, however, affect all matches generated, independent of the sublist in which they are given. These are the qualifiers `M', `T', `N', `D', `n', `o', `O' and the subscripts given in brackets (`[...]').

If a `:' appears in a qualifier list, the remainder of the expression in parenthesis is interpreted as a modifier (see the section `Modifiers' in the section `History Expansion'). Each modifier must be introduced by a separate `:'. Note also that the result after modification does not have to be an existing file. The name of any existing file can be followed by a modifier of the form `(:...)' even if no actual filename generation is performed, although note that the presence of the parentheses causes the entire expression to be subjected to any global pattern matching options such as NULL_GLOB. Thus:

ls -ld -- *(-/)

lists all directories and symbolic links that point to directories, and

ls -ld -- *(-@)

lists all broken symbolic links, and

ls -ld -- *(%W)

lists all world-writable device files in the current directory, and

ls -ld -- *(W,X)

lists all files in the current directory that are world-writable or world-executable, and

print -rC1 /tmp/foo*(u0^@:t)

outputs the basename of all root-owned files beginning with the string `foo' in /tmp, ignoring symlinks, and

ls -ld -- *.*~(lex|parse).[ch](^D^l1)

lists all files having a link count of one whose names contain a dot (but not those starting with a dot, since GLOB_DOTS is explicitly switched off) except for lex.c, lex.h, parse.c and parse.h.

print -rC1 b*.pro(#q:s/pro/shmo/)(#q.:s/builtin/shmiltin/)

demonstrates how colon modifiers and other qualifiers may be chained together. The ordinary qualifier `.' is applied first, then the colon modifiers in order from left to right. So if EXTENDED_GLOB is set and the base pattern matches the regular file builtin.pro, the shell will print `shmiltin.shmo'.