Podman rootful unit search path

Quadlet files for the root user can be placed in the following two directories:

Podman rootless unit search path

Quadlet files for non-root users can be placed in the following directories

Using symbolic links

Quadlet supports using symbolic links for the base of the search paths. Symbolic links below the search paths are not supported.

Service Type

By default, the Type field of the Service section of the Quadlet file does not need to be set. Quadlet will set it to notify for .container and .kube files, forking for .pod files, and oneshot for .volume, .network, .build, and .image files.

However, Type may be explicitly set to oneshot for .container and .kube files when no containers are expected to run once podman exits.

When setting Type=oneshot, it is recommended to also set RemainAfterExit=yes to prevent the service state from becoming inactive (dead). However, when activating a service via a timer unit, having RemainAfterExit=yes leaves the job in a "started" state which prevents subsequent activations by the timer. For more information, see the systemd.service(5) man page.

Examples for such cases: - .container file with an image that exits after their entrypoint has finished ` -.kube` file pointing to a Kubernetes Yaml file that does not define any containers. E.g. PVCs only

Enabling unit files

The services created by Podman are considered transient by systemd, which means they don't have the same persistence rules as regular units. In particular, it is not possible to "systemctl enable" them in order for them to become automatically enabled on the next boot.

To compensate for this, the generator manually applies the [Install] section of the container definition unit files during generation, in the same way systemctl enable does when run later.

For example, to start a container on boot, add something like this to the file:

[Install]
WantedBy=default.target

Currently, only the Alias, WantedBy and RequiredBy keys are supported.

The Install section can be part of the main file, or it can be in a separate drop-in file as described above. The latter allows you to install an non-enabled unit and then later enabling it by installing the drop-in.

NOTE: To express dependencies between containers, use the generated names of the service. In other words WantedBy=other.service, not WantedBy=other.container. The same is true for other kinds of dependencies, too, like After=other.service.

Template files

Systemd supports a concept of template files. They are units with names of the form "basename@instancename.service" when they are running, but that can be instantiated multiple times from a single "basename@.service" file. The individual instances can also be different by using drop-in files with the full instance name.

Quadlets support these in two ways. First of all, a quadlet unit with a template form will generate a systemd service with a template form, and the template systemd service can be used as a regular template. For example, "foo@.container" will generate "foo@.service" and you can then "systemctl start foo@bar.service".

Secondly, if you make a symlink like "foo@instance.container", that will generate an instantiated template file. When generating this file quadlet will read drop-in files both from the instanced directory (foo@instance.container.d) and the template directory (foo@.container.d). This allows customization of individual instances.

Instanced template files (like foo@bar.container) can be enabled just like non-templated ones. However, templated ones (foo@.container) are different, because they need to be instantiated. If the [Install] section contains a DefaultInstance= key, then that instance will be enabled, but if not, nothing will happen and the options will only be used as the default for units that are instantiated using symlinks.

An example template file sleep@.container might look like this:

[Unit]
Description=A templated sleepy container
[Container]
Image=quay.io/fedora/fedora
Exec=sleep %i
[Service]
# Restart service when sleep finishes
Restart=always
[Install]
WantedBy=multi-user.target
DefaultInstance=100

If this is installed, then on boot there will be a sleep@100.service running that sleeps for 100 seconds. You can then do something like systemctl start sleep@50.service to start another instance that sleeps 50 seconds, or alternatively another service can start it via a dependency like Wants=sleep@50.service.

In addition, if you do ln -s sleep@.container sleep@10.container you will also have a 10 second sleep running at boot. And, if you want that particular instance to be running with another image, you can create a drop-in file like sleep@10.container.d/10-image.conf:

[Container]
Image=quay.io/centos/centos

Relative paths

In order to support Systemd specifiers, Quadlet does not resolve relative paths that start with %. To resolve such a path, prepend it with ./.

For example, instead of EnvironmentFile=%n/env use EnvironmentFile=./%n/env

Debugging unit files

After placing the unit file in one of the unit search paths (mentioned above), you can start it with systemctl start {--user}. If it fails with "Failed to start example.service: Unit example.service not found.", then it is possible that you used incorrect syntax or you used an option from a newer version of Podman Quadlet and the generator failed to create a service file.

View the generated files and/or error messages with:

/usr/lib/systemd/system-generators/podman-system-generator {--user} --dryrun

Debugging a limited set of unit files

If you would like to debug a limited set of unit files, you can copy them to a separate directory and set the QUADLET_UNIT_DIRS environment variable to this directory when running the command below:

QUADLET_UNIT_DIRS=<Directory> /usr/lib/systemd/system-generators/podman-system-generator {--user} --dryrun

This will instruct Quadlet to look for units in this directory instead of the common ones and by that limit the output to only the units you are debugging.

AddCapability=

Add these capabilities, in addition to the default Podman capability set, to the container.

This is a space separated list of capabilities. This key can be listed multiple times.

For example:

AddCapability=CAP_DAC_OVERRIDE CAP_IPC_OWNER

AddDevice=

Adds a device node from the host into the container. The format of this is HOST-DEVICE[:CONTAINER-DEVICE][:PERMISSIONS], where HOST-DEVICE is the path of the device node on the host, CONTAINER-DEVICE is the path of the device node in the container, and PERMISSIONS is a list of permissions combining 'r' for read, 'w' for write, and 'm' for mknod(2). The - prefix tells Quadlet to add the device only if it exists on the host.

This key can be listed multiple times.

Annotation=

Set one or more OCI annotations on the container. The format is a list of key=value items, similar to Environment.

This key can be listed multiple times.

AutoUpdate=

Indicates whether the container will be auto-updated (podman-auto-update(1)). The following values are supported:

ContainerName=

The (optional) name of the Podman container. If this is not specified, the default value of systemd-%N is used, which is the same as the service name but with a systemd- prefix to avoid conflicts with user-managed containers.

ContainersConfModule=

Load the specified containers.conf(5) module. Equivalent to the Podman --module option.

This key can be listed multiple times.

DNS=

Set network-scoped DNS resolver/nameserver for containers in this network.

This key can be listed multiple times.

DNSOption=

Set custom DNS options.

This key can be listed multiple times.

DNSSearch=

Set custom DNS search domains. Use DNSSearch=. to remove the search domain.

This key can be listed multiple times.

DropCapability=

Drop these capabilities from the default podman capability set, or all to drop all capabilities.

This is a space separated list of capabilities. This key can be listed multiple times.

For example:

DropCapability=CAP_DAC_OVERRIDE CAP_IPC_OWNER

Entrypoint=

Override the default ENTRYPOINT from the image. Equivalent to the Podman --entrypoint option. Specify multi option commands in the form of a json string.

Environment=

Set an environment variable in the container. This uses the same format as services in systemd and can be listed multiple times.

EnvironmentFile=

Use a line-delimited file to set environment variables in the container. The path may be absolute or relative to the location of the unit file. This key may be used multiple times, and the order persists when passed to podman run.

EnvironmentHost=

Use the host environment inside of the container.

Exec=

If this is set then it defines what command line to run in the container. If it is not set the default entry point of the container image is used. The format is the same as for systemd command lines.

ExposeHostPort=

Exposes a port, or a range of ports (e.g. 50-59), from the host to the container. Equivalent to the Podman --expose option.

This key can be listed multiple times.

GIDMap=

Run the container in a new user namespace using the supplied GID mapping. Equivalent to the Podman --gidmap option.

This key can be listed multiple times.

GlobalArgs=

This key contains a list of arguments passed directly between podman and run in the generated file. It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

Group=

The (numeric) GID to run as inside the container. This does not need to match the GID on the host, which can be modified with UsersNS, but if that is not specified, this GID is also used on the host.

GroupAdd=

Assign additional groups to the primary user running within the container process. Also supports the keep-groups special flag. Equivalent to the Podman --group-add option.

HealthCmd=

Set or alter a healthcheck command for a container. A value of none disables existing healthchecks. Equivalent to the Podman --health-cmd option.

HealthInterval=

Set an interval for the healthchecks. An interval of disable results in no automatic timer setup. Equivalent to the Podman --health-interval option.

HealthOnFailure=

Action to take once the container transitions to an unhealthy state. The "kill" action in combination integrates best with systemd. Once the container turns unhealthy, it gets killed, and systemd restarts the service. Equivalent to the Podman --health-on-failure option.

HealthRetries=

The number of retries allowed before a healthcheck is considered to be unhealthy. Equivalent to the Podman --health-retries option.

HealthStartPeriod=

The initialization time needed for a container to bootstrap. Equivalent to the Podman --health-start-period option.

HealthStartupCmd=

Set a startup healthcheck command for a container. Equivalent to the Podman --health-startup-cmd option.

HealthStartupInterval=

Set an interval for the startup healthcheck. An interval of disable results in no automatic timer setup. Equivalent to the Podman --health-startup-interval option.

HealthStartupRetries=

The number of attempts allowed before the startup healthcheck restarts the container. Equivalent to the Podman --health-startup-retries option.

HealthStartupSuccess=

The number of successful runs required before the startup healthcheck succeeds and the regular healthcheck begins. Equivalent to the Podman --health-startup-success option.

HealthStartupTimeout=

The maximum time a startup healthcheck command has to complete before it is marked as failed. Equivalent to the Podman --health-startup-timeout option.

HealthTimeout=

The maximum time allowed to complete the healthcheck before an interval is considered failed. Equivalent to the Podman --health-timeout option.

HostName=

Sets the host name that is available inside the container. Equivalent to the Podman --hostname option.

Image=

The image to run in the container. It is recommended to use a fully qualified image name rather than a short name, both for performance and robustness reasons.

The format of the name is the same as when passed to podman pull. So, it supports using :tag or digests to guarantee the specific image version.

As a special case, if the name of the image ends with .image, Quadlet will use the image pulled by the corresponding .image file, and the generated systemd service contains a dependency on the $name-image.service. Note that the corresponding .image file must exist.

IP=

Specify a static IPv4 address for the container, for example 10.88.64.128. Equivalent to the Podman --ip option.

IP6=

Specify a static IPv6 address for the container, for example fd46:db93:aa76:ac37::10. Equivalent to the Podman --ip6 option.

Label=

Set one or more OCI labels on the container. The format is a list of key=value items, similar to Environment.

This key can be listed multiple times.

LogDriver=

Set the log-driver used by Podman when running the container. Equivalent to the Podman --log-driver option.

LogOpt=

Set the log-opt (logging options) used by Podman when running the container. Equivalent to the Podman --log-opt option. This key can be listed multiple times.

Mask=

Specify the paths to mask separated by a colon. Mask=/path/1:/path/2. A masked path cannot be accessed inside the container.

Mount=

Attach a filesystem mount to the container. This is equivalent to the Podman --mount option, and generally has the form type=TYPE,TYPE-SPECIFIC-OPTION[,...].

As a special case, for type=volume if source ends with .volume, a Podman named volume called systemd-$name is used as the source, and the generated systemd service contains a dependency on the $name-volume.service. Such a volume can be automatically be lazily created by using a $name.volume Quadlet file.

This key can be listed multiple times.

Network=

Specify a custom network for the container. This has the same format as the --network option to podman run. For example, use host to use the host network in the container, or none to not set up networking in the container.

As a special case, if the name of the network ends with .network, a Podman network called systemd-$name is used, and the generated systemd service contains a dependency on the $name-network.service. Such a network can be automatically created by using a $name.network Quadlet file.

This key can be listed multiple times.

NetworkAlias=

Add a network-scoped alias for the container. This has the same format as the --network-alias option to podman run. Aliases can be used to group containers together in DNS resolution: for example, setting NetworkAlias=web on multiple containers will make a DNS query for web resolve to all the containers with that alias.

This key can be listed multiple times.

NoNewPrivileges= (defaults to false)

If enabled, this disables the container processes from gaining additional privileges via things like setuid and file capabilities.

Notify= (defaults to false)

By default, Podman is run in such a way that the systemd startup notify command is handled by the container runtime. In other words, the service is deemed started when the container runtime starts the child in the container. However, if the container application supports sd_notify, then setting Notify to true passes the notification details to the container allowing it to notify of startup on its own.

In addition, setting Notify to healthy will postpone startup notifications until such time as the container is marked healthy, as determined by Podman healthchecks. Note that this requires setting up a container healthcheck, see the HealthCmd option for more.

PidsLimit=

Tune the container's pids limit. This is equivalent to the Podman --pids-limit option.

Pod=

Specify a Quadlet .pod unit to link the container to. The value must take the form of <name>.pod and the .pod unit must exist.

Quadlet will add all the necessary parameters to link between the container and the pod and between their corresponding services.

PodmanArgs=

This key contains a list of arguments passed directly to the end of the podman run command in the generated file (right before the image name in the command line). It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

PublishPort=

Exposes a port, or a range of ports (e.g. 50-59), from the container to the host. Equivalent to the Podman --publish option. The format is similar to the Podman options, which is of the form ip:hostPort:containerPort, ip::containerPort, hostPort:containerPort or containerPort, where the number of host and container ports must be the same (in the case of a range).

If the IP is set to 0.0.0.0 or not set at all, the port is bound on all IPv4 addresses on the host; use [::] for IPv6.

Note that not listing a host port means that Podman automatically selects one, and it may be different for each invocation of service. This makes that a less useful option. The allocated port can be found with the podman port command.

This key can be listed multiple times.

Pull=

Set the image pull policy. This is equivalent to the Podman --pull option

ReadOnly= (defaults to false)

If enabled, makes the image read-only.

ReadOnlyTmpfs= (defaults to true)

If ReadOnly is set to true, mount a read-write tmpfs on /dev, /dev/shm, /run, /tmp, and /var/tmp.

Rootfs=

The rootfs to use for the container. Rootfs points to a directory on the system that contains the content to be run within the container. This option conflicts with the Image option.

The format of the rootfs is the same as when passed to podman run --rootfs, so it supports overlay mounts as well.

Note: On SELinux systems, the rootfs needs the correct label, which is by default unconfined_u:object_r:container_file_t:s0.

RunInit= (default to false)

If enabled, the container has a minimal init process inside the container that forwards signals and reaps processes.

SeccompProfile=

Set the seccomp profile to use in the container. If unset, the default podman profile is used. Set to either the pathname of a json file, or unconfined to disable the seccomp filters.

Secret=

Use a Podman secret in the container either as a file or an environment variable. This is equivalent to the Podman --secret option and generally has the form secret[,opt=opt ...]

SecurityLabelDisable=

Turn off label separation for the container.

SecurityLabelFileType=

Set the label file type for the container files.

SecurityLabelLevel=

Set the label process level for the container processes.

SecurityLabelNested=

Allow SecurityLabels to function within the container. This allows separation of containers created within the container.

SecurityLabelType=

Set the label process type for the container processes.

ShmSize=

Size of /dev/shm.

This is equivalent to the Podman --shm-size option and generally has the form number[unit]

StopSignal=

Signal to stop a container. Default is SIGTERM.

This is equivalent to the Podman --stop-signal option

StopTimeout=

Seconds to wait before forcibly stopping the container.

Note, this value should be lower than the actual systemd unit timeout to make sure the podman rm command is not killed by systemd.

This is equivalent to the Podman --stop-timeout option

SubGIDMap=

Run the container in a new user namespace using the map with name in the /etc/subgid file. Equivalent to the Podman --subgidname option.

SubUIDMap=

Run the container in a new user namespace using the map with name in the /etc/subuid file. Equivalent to the Podman --subuidname option.

Sysctl=

Configures namespaced kernel parameters for the container. The format is Sysctl=name=value.

This is a space separated list of kernel parameters. This key can be listed multiple times.

For example:

Sysctl=net.ipv6.conf.all.disable_ipv6=1 net.ipv6.conf.all.use_tempaddr=1

Timezone= (if unset uses system-configured default)

The timezone to run the container in.

Tmpfs=

Mount a tmpfs in the container. This is equivalent to the Podman --tmpfs option, and generally has the form CONTAINER-DIR[:OPTIONS].

This key can be listed multiple times.

UIDMap=

Run the container in a new user namespace using the supplied UID mapping. Equivalent to the Podman --uidmap option.

This key can be listed multiple times.

Ulimit=

Ulimit options. Sets the ulimits values inside of the container.

This key can be listed multiple times.

Unmask=

Specify the paths to unmask separated by a colon. unmask=ALL or /path/1:/path/2, or shell expanded paths (/proc/*):

If set to ALL, Podman will unmask all the paths that are masked or made read-only by default.

The default masked paths are /proc/acpi, /proc/kcore, /proc/keys, /proc/latency_stats, /proc/sched_debug, /proc/scsi, /proc/timer_list, /proc/timer_stats, /sys/firmware, and /sys/fs/selinux.

The default paths that are read-only are /proc/asound, /proc/bus, /proc/fs, /proc/irq, /proc/sys, /proc/sysrq-trigger, /sys/fs/cgroup.

User=

The (numeric) UID to run as inside the container. This does not need to match the UID on the host, which can be modified with UserNS, but if that is not specified, this UID is also used on the host.

UserNS=

Set the user namespace mode for the container. This is equivalent to the Podman --userns option and generally has the form MODE[:OPTIONS,...].

Volume=

Mount a volume in the container. This is equivalent to the Podman --volume option, and generally has the form [[SOURCE-VOLUME|HOST-DIR:]CONTAINER-DIR[:OPTIONS]].

If SOURCE-VOLUME starts with ., Quadlet resolves the path relative to the location of the unit file.

As a special case, if SOURCE-VOLUME ends with .volume, a Podman named volume called systemd-$name is used as the source, and the generated systemd service contains a dependency on the $name-volume.service. Such a volume can be automatically be lazily created by using a $name.volume Quadlet file.

This key can be listed multiple times.

WorkingDir=

Working directory inside the container.

The default working directory for running binaries within a container is the root directory (/). The image developer can set a different default with the WORKDIR instruction. This option overrides the working directory by using the -w option.

ContainersConfModule=

Load the specified containers.conf(5) module. Equivalent to the Podman --module option.

This key can be listed multiple times.

GlobalArgs=

This key contains a list of arguments passed directly between podman and pod in the generated file. It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

Network=

Specify a custom network for the pod. This has the same format as the --network option to podman pod create. For example, use host to use the host network in the pod, or none to not set up networking in the pod.

As a special case, if the name of the network ends with .network, Quadlet will look for the corresponding .network Quadlet unit. If found, Quadlet will use the name of the Network set in the Unit, otherwise, systemd-$name is used. The generated systemd service contains a dependency on the service unit generated for that .network unit, or on $name-network.service if the .network unit is not found

This key can be listed multiple times.

NetworkAlias=

Add a network-scoped alias for the pod. This has the same format as the --network-alias option to podman pod create. Aliases can be used to group containers together in DNS resolution: for example, setting NetworkAlias=web on multiple containers will make a DNS query for web resolve to all the containers with that alias.

This key can be listed multiple times.

PodmanArgs=

This key contains a list of arguments passed directly to the end of the podman pod create command in the generated file. It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

PodName=

The (optional) name of the Podman pod. If this is not specified, the default value of systemd-%N is used, which is the same as the service name but with a systemd- prefix to avoid conflicts with user-managed containers.

Please note that pods and containers cannot have the same name. So, if PodName is set, it must not conflict with any container.

PublishPort=

Exposes a port, or a range of ports (e.g. 50-59), from the pod to the host. Equivalent to the Podman --publish option. The format is similar to the Podman options, which is of the form ip:hostPort:containerPort, ip::containerPort, hostPort:containerPort or containerPort, where the number of host and container ports must be the same (in the case of a range).

If the IP is set to 0.0.0.0 or not set at all, the port is bound on all IPv4 addresses on the host; use [::] for IPv6.

Note that not listing a host port means that Podman automatically selects one, and it may be different for each invocation of service. This makes that a less useful option. The allocated port can be found with the podman port command.

When using host networking via Network=host, the PublishPort= option cannot be used.

This key can be listed multiple times.

Volume=

Mount a volume in the pod. This is equivalent to the Podman --volume option, and generally has the form [[SOURCE-VOLUME|HOST-DIR:]CONTAINER-DIR[:OPTIONS]].

If SOURCE-VOLUME starts with ., Quadlet resolves the path relative to the location of the unit file.

As a special case, if SOURCE-VOLUME ends with .volume, Quadlet will look for the corresponding .volume Quadlet unit. If found, Quadlet will use the name of the Volume set in the Unit, otherwise, systemd-$name is used. The generated systemd service contains a dependency on the service unit generated for that .volume unit, or on $name-volume.service if the .volume unit is not found

This key can be listed multiple times.

AutoUpdate=

Indicates whether containers will be auto-updated (podman-auto-update(1)). AutoUpdate can be specified multiple times. The following values are supported:

ConfigMap=

Pass the Kubernetes ConfigMap YAML path to podman kube play via the --configmap argument. Unlike the configmap argument, the value may contain only one path but it may be absolute or relative to the location of the unit file.

This key may be used multiple times

ContainersConfModule=

Load the specified containers.conf(5) module. Equivalent to the Podman --module option.

This key can be listed multiple times.

ExitCodePropagation=

Control how the main PID of the systemd service should exit. The following values are supported: - all: exit non-zero if all containers have failed (i.e., exited non-zero) - any: exit non-zero if any container has failed - none: exit zero and ignore failed containers

The current default value is none.

GlobalArgs=

This key contains a list of arguments passed directly between podman and kube in the generated file. It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

KubeDownForce=

Remove all resources, including volumes, when calling podman kube down. Equivalent to the Podman --force option.

LogDriver=

Set the log-driver Podman uses when running the container. Equivalent to the Podman --log-driver option.

Network=

Specify a custom network for the container. This has the same format as the --network option to podman kube play. For example, use host to use the host network in the container, or none to not set up networking in the container.

As a special case, if the name of the network ends with .network, a Podman network called systemd-$name is used, and the generated systemd service contains a dependency on the $name-network.service. Such a network can be automatically created by using a $name.network Quadlet file.

This key can be listed multiple times.

PodmanArgs=

This key contains a list of arguments passed directly to the end of the podman kube play command in the generated file (right before the path to the yaml file in the command line). It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

PublishPort=

Exposes a port, or a range of ports (e.g. 50-59), from the container to the host. Equivalent to the podman kube play's --publish option. The format is similar to the Podman options, which is of the form ip:hostPort:containerPort, ip::containerPort, hostPort:containerPort or containerPort, where the number of host and container ports must be the same (in the case of a range).

If the IP is set to 0.0.0.0 or not set at all, the port is bound on all IPv4 addresses on the host; use [::] for IPv6.

The list of published ports specified in the unit file is merged with the list of ports specified in the Kubernetes YAML file. If the same container port and protocol is specified in both, the entry from the unit file takes precedence

This key can be listed multiple times.

SetWorkingDirectory=

Set the WorkingDirectory field of the Service group of the Systemd service unit file. Used to allow podman kube play to correctly resolve relative paths. Supported values are yaml and unit to set the working directory to that of the YAML or Quadlet Unit file respectively.

Alternatively, users can explicitly set the WorkingDirectory field of the Service group in the .kube file. Please note that if the WorkingDirectory field of the Service group is set, Quadlet will not set it even if SetWorkingDirectory is set

UserNS=

Set the user namespace mode for the container. This is equivalent to the Podman --userns option and generally has the form MODE[:OPTIONS,...].

Yaml=

The path, absolute or relative to the location of the unit file, to the Kubernetes YAML file to use.

ContainersConfModule=

Load the specified containers.conf(5) module. Equivalent to the Podman --module option.

This key can be listed multiple times.

DisableDNS= (defaults to false)

If enabled, disables the DNS plugin for this network.

This is equivalent to the Podman --disable-dns option

DNS=

Set network-scoped DNS resolver/nameserver for containers in this network.

This key can be listed multiple times.

Driver= (defaults to bridge)

Driver to manage the network. Currently bridge, macvlan and ipvlan are supported.

This is equivalent to the Podman --driver option

Gateway=

Define a gateway for the subnet. If you want to provide a gateway address, you must also provide a subnet option.

This is equivalent to the Podman --gateway option

This key can be listed multiple times.

GlobalArgs=

This key contains a list of arguments passed directly between podman and network in the generated file. It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

Internal= (defaults to false)

Restrict external access of this network.

This is equivalent to the Podman --internal option

IPAMDriver=

Set the ipam driver (IP Address Management Driver) for the network. Currently host-local, dhcp and none are supported.

This is equivalent to the Podman --ipam-driver option

IPRange=

Allocate container IP from a range. The range must be a either a complete subnet in CIDR notation or be in the <startIP>-<endIP> syntax which allows for a more flexible range compared to the CIDR subnet. The ip-range option must be used with a subnet option.

This is equivalent to the Podman --ip-range option

This key can be listed multiple times.

IPv6=

Enable IPv6 (Dual Stack) networking.

This is equivalent to the Podman --ipv6 option

Label=

Set one or more OCI labels on the network. The format is a list of key=value items, similar to Environment.

This key can be listed multiple times.

NetworkName=

The (optional) name of the Podman network. If this is not specified, the default value of systemd-%N is used, which is the same as the unit name but with a systemd- prefix to avoid conflicts with user-managed networks.

Options=

Set driver specific options.

This is equivalent to the Podman --opt option

PodmanArgs=

This key contains a list of arguments passed directly to the end of the podman network create command in the generated file (right before the name of the network in the command line). It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

Subnet=

The subnet in CIDR notation.

This is equivalent to the Podman --subnet option

This key can be listed multiple times.

ContainersConfModule=

Load the specified containers.conf(5) module. Equivalent to the Podman --module option.

This key can be listed multiple times.

Copy= (default to true)

If enabled, the content of the image located at the mountpoint of the volume is copied into the volume on the first run.

Device=

The path of a device which is mounted for the volume.

Driver=

Specify the volume driver name. When set to image, the Image key must also be set.

This is equivalent to the Podman --driver option.

GlobalArgs=

This key contains a list of arguments passed directly between podman and volume in the generated file. It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

Group=

The host (numeric) GID, or group name to use as the group for the volume

Image=

Specifies the image the volume is based on when Driver is set to the image. It is recommended to use a fully qualified image name rather than a short name, both for performance and robustness reasons.

The format of the name is the same as when passed to podman pull. So, it supports using :tag or digests to guarantee the specific image version.

As a special case, if the name of the image ends with .image, Quadlet will use the image pulled by the corresponding .image file, and the generated systemd service contains a dependency on the $name-image.service. Note that the corresponding .image file must exist.

Label=

Set one or more OCI labels on the volume. The format is a list of key=value items, similar to Environment.

This key can be listed multiple times.

Options=

The mount options to use for a filesystem as used by the mount(8) command -o option.

PodmanArgs=

This key contains a list of arguments passed directly to the end of the podman volume create command in the generated file (right before the name of the volume in the command line). It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

Type=

The filesystem type of Device as used by the mount(8) commands -t option.

User=

The host (numeric) UID, or user name to use as the owner for the volume

VolumeName=

The (optional) name of the Podman volume. If this is not specified, the default value of systemd-%N is used, which is the same as the unit name but with a systemd- prefix to avoid conflicts with user-managed volumes.

Annotation=

Add an image annotation (e.g. annotation=value) to the image metadata. Can be used multiple times.

This is equivalant to the --annotation option of podman build.

Arch=

Override the architecture, defaults to hosts', of the image to be built.

This is equivalent to the --arch option of podman build.

AuthFile=

Path of the authentication file.

This is equivalent to the --authfile option of podman build.

ContainersConfModule=

Load the specified containers.conf(5) module. Equivalent to the Podman --module option.

This key can be listed multiple times.

DNS=

Set network-scoped DNS resolver/nameserver for the build container.

This key can be listed multiple times.

This is equivalent to the --dns option of podman build.

DNSOption=

Set custom DNS options.

This key can be listed multiple times.

This is equivalent to the --dns-option option of podman build.

DNSSearch=

Set custom DNS search domains. Use DNSSearch=. to remove the search domain.

This key can be listed multiple times.

This is equivalent to the --dns-search option of podman build.

Environment=

Add a value (e.g. env=value) to the built image. This uses the same format as services in systemd ⟨https://www.freedesktop.org/software/systemd/man/systemd.exec.html#Environment=⟩ and can be listed multiple times.

File=

Specifies a Containerfile which contains instructions for building the image. A URL starting with http(s):// allows you to specify a remote Containerfile to be downloaded. Note that for a given relative path to a Containerfile, or when using a http(s):// URL, you also must set SetWorkingDirectory= in order for podman build to find a valid context directory for the resources specified in the Containerfile.

Note that setting a File= field is mandatory for a .build file, unless SetWorkingDirectory (or a WorkingDirectory in the Service group) has also been set.

This is equivalent to the --file option of podman build.

ForceRM=

Always remove intermediate containers after a build, even if the build fails (default true).

This is equivalent to the --force-rm option of podman build.

GlobalArgs=

This key contains a list of arguments passed directly between podman and build in the generated file. It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

GroupAdd=

Assign additional groups to the primary user running within the container process. Also supports the keep-groups special flag.

This is equivalent to the --group-add option of podman build.

ImageTag=

Specifies the name which is assigned to the resulting image if the build process completes successfully.

This is equivalent to the --tag option of podman build.

Label=

Add an image label (e.g. label=value) to the image metadata. Can be used multiple times.

This is equivalent to the --label option of podman build.

Network=

Sets the configuration for network namespaces when handling RUN instructions. This has the same format as the --network option to podman build. For example, use host to use the host network, or none to not set up networking.

As a special case, if the name of the network ends with .network, Quadlet will look for the corresponding .network Quadlet unit. If found, Quadlet will use the name of the Network set in the Unit, otherwise, systemd-$name is used. The generated systemd service contains a dependency on the service unit generated for that .network unit, or on $name-network.service if the .network unit is not found.

This key can be listed multiple times.

PodmanArgs=

This key contains a list of arguments passed directly to the end of the podman build command in the generated file (right before the image name in the command line). It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

Pull=

Set the image pull policy.

This is equivalent to the --pull option of podman build.

Secret=

Pass secret information used in Containerfile build stages in a safe way.

This is equivalent to the --secret option of podman build and generally has the form secret[,opt=opt ...].

SetWorkingDirectory=

Provide context (a working directory) to podman build. Supported values are a path, a URL, or the special keys file or unit to set the context directory to the parent directory of the file from the File= key or to that of the Quadlet .build unit file, respectively. This allows Quadlet to resolve relative paths.

When using one of the special keys (file or unit), the WorkingDirectory field of the Service group of the Systemd service unit will also be set to accordingly. Alternatively, users can explicitly set the WorkingDirectory field of the Service group in the .build file. Please note that if the WorkingDirectory field of the Service group is set by the user, Quadlet will not overwrite it even if SetWorkingDirectory is set to file or unit.

By providing a URL to SetWorkingDirectory= you can instruct podman build to clone a Git repository or download an archive file extracted to a temporary location by podman build as build context. Note that in this case, the WorkingDirectory of the Systemd service unit is left untouched by Quadlet.

Note that providing context directory is mandatory for a .build file, unless a File= key has also been provided.

Target=

Set the target build stage to build. Commands in the Containerfile after the target stage are skipped.

This is equivalent to the --target option of podman build.

TLSVerify=

Require HTTPS and verification of certificates when contacting registries.

This is equivalent to the --tls-verify option of podman build.

Variant=

Override the default architecture variant of the container image to be built.

This is equivalent to the --variant option of podman build.

Volume=

Mount a volume to containers when executing RUN instructions during the build. This is equivalent to the --volume option of podman build, and generally has the form [[SOURCE-VOLUME|HOST-DIR:]CONTAINER-DIR[:OPTIONS]].

If SOURCE-VOLUME starts with ., Quadlet resolves the path relative to the location of the unit file.

As a special case, if SOURCE-VOLUME ends with .volume, Quadlet will look for the corresponding .volume Quadlet unit. If found, Quadlet will use the name of the Volume set in the Unit, otherwise, systemd-$name is used. The generated systemd service contains a dependency on the service unit generated for that .volume unit, or on $name-volume.service if the .volume unit is not found

This key can be listed multiple times.

AllTags=

All tagged images in the repository are pulled.

This is equivalent to the Podman --all-tags option.

Arch=

Override the architecture, defaults to hosts, of the image to be pulled.

This is equivalent to the Podman --arch option.

AuthFile=

Path of the authentication file.

This is equivalent to the Podman --authfile option.

CertDir=

Use certificates at path (*.crt, *.cert, *.key) to connect to the registry.

This is equivalent to the Podman --cert-dir option.

ContainersConfModule=

Load the specified containers.conf(5) module. Equivalent to the Podman --module option.

This key can be listed multiple times.

Creds=

The [username[:password]] to use to authenticate with the registry, if required.

This is equivalent to the Podman --creds option.

DecryptionKey=

The [key[:passphrase]] to be used for decryption of images.

This is equivalent to the Podman --decryption-key option.

GlobalArgs=

This key contains a list of arguments passed directly between podman and image in the generated file. It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

Image=

The image to pull. It is recommended to use a fully qualified image name rather than a short name, both for performance and robustness reasons.

The format of the name is the same as when passed to podman pull. So, it supports using :tag or digests to guarantee the specific image version.

ImageTag=

Actual FQIN of the referenced Image. Only meaningful when source is a file or directory archive.

For example, an image saved into a docker-archive with the following Podman command:

podman image save --format docker-archive --output /tmp/archive-file.tar quay.io/podman/stable:latest

requires setting - Image=docker-archive:/tmp/archive-file.tar - ImageTag=quay.io/podman/stable:latest

OS=

Override the OS, defaults to hosts, of the image to be pulled.

This is equivalent to the Podman --os option.

PodmanArgs=

This key contains a list of arguments passed directly to the end of the podman image pull command in the generated file (right before the image name in the command line). It can be used to access Podman features otherwise unsupported by the generator. Since the generator is unaware of what unexpected interactions can be caused by these arguments, it is not recommended to use this option.

The format of this is a space separated list of arguments, which can optionally be individually escaped to allow inclusion of whitespace and other control characters.

This key can be listed multiple times.

TLSVerify=

Require HTTPS and verification of certificates when contacting registries.

This is equivalent to the Podman --tls-verify option.

Variant=

Override the default architecture variant of the container image.

This is equivalent to the Podman --variant option.