NAME

opus_defines.h - Opus reference implementation constants.

SYNOPSIS

#include 'opus_types.h'

Macros

#define OPUS_OK
No error. #define OPUS_BAD_ARG
One or more invalid/out of range arguments. #define OPUS_BUFFER_TOO_SMALL
Not enough bytes allocated in the buffer. #define OPUS_INTERNAL_ERROR
An internal error was detected. #define OPUS_INVALID_PACKET
The compressed data passed is corrupted. #define OPUS_UNIMPLEMENTED
Invalid/unsupported request number. #define OPUS_INVALID_STATE
An encoder or decoder structure is invalid or already freed. #define OPUS_ALLOC_FAIL
Memory allocation has failed. #define OPUS_AUTO
Auto/default setting. #define OPUS_BITRATE_MAX
Maximum bitrate. #define OPUS_APPLICATION_VOIP
Best for most VoIP/videoconference applications where listening quality and intelligibility matter most. #define OPUS_APPLICATION_AUDIO
Best for broadcast/high-fidelity application where the decoded audio should be as close as possible to the input. #define OPUS_APPLICATION_RESTRICTED_LOWDELAY
Only use when lowest-achievable latency is what matters most. #define OPUS_SIGNAL_VOICE 3001
Signal being encoded is voice. #define OPUS_SIGNAL_MUSIC 3002
Signal being encoded is music. #define OPUS_BANDWIDTH_NARROWBAND
4 kHz bandpass #define OPUS_BANDWIDTH_MEDIUMBAND
6 kHz bandpass #define OPUS_BANDWIDTH_WIDEBAND
8 kHz bandpass #define OPUS_BANDWIDTH_SUPERWIDEBAND
12 kHz bandpass #define OPUS_BANDWIDTH_FULLBAND
20 kHz bandpass #define OPUS_FRAMESIZE_ARG 5000
Select frame size from the argument (default) #define OPUS_FRAMESIZE_2_5_MS 5001
Use 2.5 ms frames. #define OPUS_FRAMESIZE_5_MS 5002
Use 5 ms frames. #define OPUS_FRAMESIZE_10_MS 5003
Use 10 ms frames. #define OPUS_FRAMESIZE_20_MS 5004
Use 20 ms frames. #define OPUS_FRAMESIZE_40_MS 5005
Use 40 ms frames. #define OPUS_FRAMESIZE_60_MS 5006
Use 60 ms frames. #define OPUS_FRAMESIZE_80_MS 5007
Use 80 ms frames. #define OPUS_FRAMESIZE_100_MS 5008
Use 100 ms frames. #define OPUS_FRAMESIZE_120_MS 5009
Use 120 ms frames. #define OPUS_SET_COMPLEXITY(x)
Configures the encoder's computational complexity. #define OPUS_GET_COMPLEXITY(x)
Gets the encoder's complexity configuration. #define OPUS_SET_BITRATE(x)
Configures the bitrate in the encoder. #define OPUS_GET_BITRATE(x)
Gets the encoder's bitrate configuration. #define OPUS_SET_VBR(x)
Enables or disables variable bitrate (VBR) in the encoder. #define OPUS_GET_VBR(x)
Determine if variable bitrate (VBR) is enabled in the encoder. #define OPUS_SET_VBR_CONSTRAINT(x)
Enables or disables constrained VBR in the encoder. #define OPUS_GET_VBR_CONSTRAINT(x)
Determine if constrained VBR is enabled in the encoder. #define OPUS_SET_FORCE_CHANNELS(x)
Configures mono/stereo forcing in the encoder. #define OPUS_GET_FORCE_CHANNELS(x)
Gets the encoder's forced channel configuration. #define OPUS_SET_MAX_BANDWIDTH(x)
Configures the maximum bandpass that the encoder will select automatically. #define OPUS_GET_MAX_BANDWIDTH(x)
Gets the encoder's configured maximum allowed bandpass. #define OPUS_SET_BANDWIDTH(x)
Sets the encoder's bandpass to a specific value. #define OPUS_SET_SIGNAL(x)
Configures the type of signal being encoded. #define OPUS_GET_SIGNAL(x)
Gets the encoder's configured signal type. #define OPUS_SET_APPLICATION(x)
Configures the encoder's intended application. #define OPUS_GET_APPLICATION(x)
Gets the encoder's configured application. #define OPUS_GET_LOOKAHEAD(x)
Gets the total samples of delay added by the entire codec. #define OPUS_SET_INBAND_FEC(x)
Configures the encoder's use of inband forward error correction (FEC). #define OPUS_GET_INBAND_FEC(x)
Gets encoder's configured use of inband forward error correction. #define OPUS_SET_PACKET_LOSS_PERC(x)
Configures the encoder's expected packet loss percentage. #define OPUS_GET_PACKET_LOSS_PERC(x)
Gets the encoder's configured packet loss percentage. #define OPUS_SET_DTX(x)
Configures the encoder's use of discontinuous transmission (DTX). #define OPUS_GET_DTX(x)
Gets encoder's configured use of discontinuous transmission. #define OPUS_SET_LSB_DEPTH(x)
Configures the depth of signal being encoded. #define OPUS_GET_LSB_DEPTH(x)
Gets the encoder's configured signal depth. #define OPUS_SET_EXPERT_FRAME_DURATION(x)
Configures the encoder's use of variable duration frames. #define OPUS_GET_EXPERT_FRAME_DURATION(x)
Gets the encoder's configured use of variable duration frames. #define OPUS_SET_PREDICTION_DISABLED(x)
If set to 1, disables almost all use of prediction, making frames almost completely independent. #define OPUS_GET_PREDICTION_DISABLED(x)
Gets the encoder's configured prediction status. #define OPUS_RESET_STATE
Resets the codec state to be equivalent to a freshly initialized state. #define OPUS_GET_FINAL_RANGE(x)
Gets the final state of the codec's entropy coder. #define OPUS_GET_BANDWIDTH(x)
Gets the encoder's configured bandpass or the decoder's last bandpass. #define OPUS_GET_SAMPLE_RATE(x)
Gets the sampling rate the encoder or decoder was initialized with. #define OPUS_SET_PHASE_INVERSION_DISABLED(x)
If set to 1, disables the use of phase inversion for intensity stereo, improving the quality of mono downmixes, but slightly reducing normal stereo quality. #define OPUS_GET_PHASE_INVERSION_DISABLED(x)
Gets the encoder's configured phase inversion status. #define OPUS_GET_IN_DTX(x)
Gets the DTX state of the encoder. #define OPUS_SET_GAIN(x)
Configures decoder gain adjustment. #define OPUS_GET_GAIN(x)
Gets the decoder's configured gain adjustment. #define OPUS_GET_LAST_PACKET_DURATION(x)
Gets the duration (in samples) of the last packet successfully decoded or concealed. #define OPUS_GET_PITCH(x)
Gets the pitch of the last decoded frame, if available.

Functions

const char * opus_strerror (int error)
Converts an opus error code into a human readable string. const char * opus_get_version_string (void)
Gets the libopus version string.

Detailed Description

Opus reference implementation constants.

Author

Generated automatically by Doxygen for Opus from the source code.