GET-DSSD-POWER-ST(1) NVMe Manual GET-DSSD-POWER-ST(1)

nvme-ocp-get-dssd-power-state-feature - Get DSSD Power State

nvme ocp get-dssd-power-state-feature <device>
                        [--sel=<select> | -S <select>] [--all | -a]
                        [--no-uuid | -n]

For the NVMe device given, retrieves OCP DSSD Power State. Passing --all calls NVMe Get Feature three times, returning all three of the Current, Default, and Saved values.

The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0) or block device (ex: /dev/nvme0n1).

This will only work on OCP compliant devices supporting this feature. Results for any other device are undefined.

On success it returns 0, error code otherwise.

-S <select>, --sel=<select>

Select (SEL): This field specifies which value of the attributes to return in the provided data:
Select Description
0 Current
1 Default
2 Saved
3 Supported capabilities
4-7 Reserved

-a, --all

Print out all 3 values at once - Current DSSD Power State, Default DSSD Power State, and Saved DSSD Power State

-n, --no-uuid

Do not try to automatically detect UUID index for this command (required for old OCP 1.0 support)

•Has the program issue a get-dssd-power-state-feature command to get the Curent DSSD Power State in watts. 
# nvme ocp get-dssd-power-state-feature /dev/nvme0 -S 0
•Has the program issue a get-dssd-power-state-feature command to get all three DSSD Power States in watts. 
# nvme ocp get-dssd-power-state-feature /dev/nvme0 -a

Part of the nvme-user suite.

08/07/2024 NVMe