SMBIOS-WIRELESS-CTL(1) User Commands SMBIOS-WIRELESS-CTL(1)

smbios-wireless-ctl - ../src/bin/smbios-wireless-ctl

smbios-wireless-ctl

show program's version number and exit
show this help message and exit
Show wireless configuration (default)
Set BIOS boot-time setting.
Do not set BIOS boot-time setting.
Set BIOS runtime setting (default).
Do not set BIOS runtime setting.
Set radio runtime status for wireless LAN
Set radio runtime status for Bluetooth
Set radio runtime status for cellular (wireless WAN)
Set radio runtime status for UWB
Set radio runtime status for WiGig
Set hardware switch so that it controls radio for wireless LAN
Set hardware switch so that it controls radio for Bluetooth
Set hardware switch so that it controls radio for cellular (wireless WAN)
Set hardware switch so that it controls radio for UWB
Set hardware switch so that it controls radio for WiGig
Enable or disable the WIFI locator switch
Get status for wireless LAN. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown.
Get status for Bluetooth. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown.
Get status for cellular (wireless WAN). 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown.
Get status for UWB. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown.
Get status for WiGig. 0 = enabled. 1 = disabled. 2 = not present. 3 = unsupported. 4 = unknown.
Get status for locator switch
Display more verbose output.
Minimize program output. Only errors and warnings are displayed.
Enable verbose function tracing.
Specify alternate config log.
BIOS pre-calculated security key.
BIOS Setup password for set/activate operations.
Do not auto-convert password to scancodes.
Path to a memory dump file to use instead of real RAM
Path to a CMOS dump file to use instead of real CMOS

The full documentation for smbios-wireless-ctl is maintained as a Texinfo manual. If the info and smbios-wireless-ctl programs are properly installed at your site, the command

info smbios-wireless-ctl

should give you access to the complete manual.

December 2021 smbios-wireless-ctl 2.4.3