GITPACKING(7) | Git Manual | GITPACKING(7) |
NAME
gitpacking - Advanced concepts related to packing in Git
SYNOPSIS
gitpacking
DESCRIPTION
This document aims to describe some advanced concepts related to packing in Git.
Many concepts are currently described scattered between manual pages of various Git commands, including git-pack-objects(1), git-repack(1), and others, as well as gitformat-pack(5), and parts of the Documentation/technical tree.
There are many aspects of packing in Git that are not covered in this document that instead live in the aforementioned areas. Over time, those scattered bits may coalesce into this document.
PSEUDO-MERGE BITMAPS
Note
Pseudo-merge bitmaps are considered an experimental feature, so the configuration and many of the ideas are subject to change.
Background
Reachability bitmaps are most efficient when we have on-disk stored bitmaps for one or more of the starting points of a traversal. For this reason, Git prefers storing bitmaps for commits at the tips of refs, because traversals tend to start with those points.
But if you have a large number of refs, it’s not feasible to store a bitmap for every ref tip. It takes up space, and just OR-ing all of those bitmaps together is expensive.
One way we can deal with that is to create bitmaps that represent groups of refs. When a traversal asks about the entire group, then we can use this single bitmap instead of considering each ref individually. Because these bitmaps represent the set of objects which would be reachable in a hypothetical merge of all of the commits, we call them pseudo-merge bitmaps.
Overview
A "pseudo-merge bitmap" is used to refer to a pair of bitmaps, as follows:
Commit bitmap
Merge bitmap
Pseudo-merge bitmaps can accelerate bitmap traversals when all commits for a given pseudo-merge are listed on either side of the traversal, either directly (by explicitly asking for them as part of the HAVES or WANTS) or indirectly (by encountering them during a fill-in traversal).
Use-cases
For example, suppose there exists a pseudo-merge bitmap with a large number of commits, all of which are listed in the WANTS section of some bitmap traversal query. When pseudo-merge bitmaps are enabled, the bitmap machinery can quickly determine there is a pseudo-merge which satisfies some subset of the wanted objects on either side of the query. Then, we can inflate the EWAH-compressed bitmap, and OR it in to the resulting bitmap. By contrast, without pseudo-merge bitmaps, we would have to repeat the decompression and OR-ing step over a potentially large number of individual bitmaps, which can take proportionally more time.
Another benefit of pseudo-merges arises when there is some combination of (a) a large number of references, with (b) poor bitmap coverage, and (c) deep, nested trees, making fill-in traversal relatively expensive. For example, suppose that there are a large enough number of tags where bitmapping each of the tags individually is infeasible. Without pseudo-merge bitmaps, computing the result of, say, git rev-list --use-bitmap-index --count --objects --tags would likely require a large amount of fill-in traversal. But when a large quantity of those tags are stored together in a pseudo-merge bitmap, the bitmap machinery can take advantage of the fact that we only care about the union of objects reachable from all of those tags, and answer the query much faster.
Configuration
Reference tips are grouped into different pseudo-merge groups according to two criteria. A reference name matches one or more of the defined pseudo-merge patterns, and optionally one or more capture groups within that pattern which further partition the group.
Within a group, commits may be considered "stable", or "unstable" depending on their age. These are adjusted by setting the bitmapPseudoMerge.<name>.stableThreshold and bitmapPseudoMerge.<name>.threshold configuration values, respectively.
All stable commits are grouped into pseudo-merges of equal size (bitmapPseudoMerge.<name>.stableSize). If the stableSize configuration is set to, say, 100, then the first 100 commits (ordered by committer date) which are older than the stableThreshold value will form one group, the next 100 commits will form another group, and so on.
Among unstable commits, the pseudo-merge machinery will attempt to combine older commits into large groups as opposed to newer commits which will appear in smaller groups. This is based on the heuristic that references whose tip commit is older are less likely to be modified to point at a different commit than a reference whose tip commit is newer.
The size of groups is determined by a power-law decay function, and the decay parameter roughly corresponds to "k" in f(n) = C*n^(-k/100), where f(n) describes the size of the n-th pseudo-merge group. The sample rate controls what percentage of eligible commits are considered as candidates. The threshold parameter indicates the minimum age (so as to avoid including too-recent commits in a pseudo-merge group, making it less likely to be valid). The "maxMerges" parameter sets an upper-bound on the number of pseudo-merge commits an individual group
The "stable"-related parameters control "stable" pseudo-merge groups, comprised of a fixed number of commits which are older than the configured "stable threshold" value and may be grouped together in chunks of "stableSize" in order of age.
The exact configuration for pseudo-merges is as follows:
Note
The configuration options in bitmapPseudoMerge.* are considered EXPERIMENTAL and may be subject to change or be removed entirely in the future. For more information about the pseudo-merge bitmap feature, see the "Pseudo-merge bitmaps" section of gitpacking(7).
bitmapPseudoMerge.<name>.pattern
Commits are grouped into pseudo-merge groups based on whether or not any reference(s) that point at a given commit match the pattern, which is an extended regular expression.
Within a pseudo-merge group, commits may be further grouped into sub-groups based on the capture groups in the pattern. These sub-groupings are formed from the regular expressions by concatenating any capture groups from the regular expression, with a - dash in between.
For example, if the pattern is refs/tags/, then all tags (provided they meet the below criteria) will be considered candidates for the same pseudo-merge group. However, if the pattern is instead refs/remotes/([0-9])+/tags/, then tags from different remotes will be grouped into separate pseudo-merge groups, based on the remote number.
bitmapPseudoMerge.<name>.decay
Setting the decay rate equal to 0 will cause all groups to be the same size. Setting the decay rate equal to 1 will cause the n`th group to be `1/n the size of the initial group. Higher values of the decay rate cause consecutive groups to shrink at an increasing rate. The default is 1.
If all groups are the same size, it is possible that groups containing newer commits will be able to be used less often than earlier groups, since it is more likely that the references pointing at newer commits will be updated more often than a reference pointing at an old commit.
bitmapPseudoMerge.<name>.sampleRate
bitmapPseudoMerge.<name>.threshold
bitmapPseudoMerge.<name>.maxMerges
For pseudo-merge groups whose pattern does not contain any capture groups, this setting is applied for all commits matching the regular expression. For patterns that have one or more capture groups, this setting is applied for each distinct capture group.
For example, if your capture group is refs/tags/, then this setting will distribute all tags into a maximum of maxMerges pseudo-merge commits. However, if your capture group is, say, refs/remotes/([0-9]+)/tags/, then this setting will be applied to each remote’s set of tags individually.
Must be non-negative. The default value is 64.
bitmapPseudoMerge.<name>.stableThreshold
Setting this threshold to a smaller value (e.g., 1.week.ago) will cause more stable groups to be generated (which impose a one-time generation cost) but those groups will likely become stale over time. Using a larger value incurs the opposite penalty (fewer stable groups which are more useful).
bitmapPseudoMerge.<name>.stableSize
Examples
Suppose that you have a repository with a large number of references, and you want a bare-bones configuration of pseudo-merge bitmaps that will enhance bitmap coverage of the refs/ namespace. You may start with a configuration like so:
[bitmapPseudoMerge "all"] pattern = "refs/" threshold = now stableThreshold = never sampleRate = 100 maxMerges = 64
This will create pseudo-merge bitmaps for all references, regardless of their age, and group them into 64 pseudo-merge commits.
If you wanted to separate tags from branches when generating pseudo-merge commits, you would instead define the pattern with a capture group, like so:
[bitmapPseudoMerge "all"] pattern = "refs/(heads/tags)/"
Suppose instead that you are working in a fork-network repository, with each fork specified by some numeric ID, and whose refs reside in refs/virtual/NNN/ (where NNN is the numeric ID corresponding to some fork) in the network. In this instance, you may instead write something like:
[bitmapPseudoMerge "all"] pattern = "refs/virtual/([0-9]+)/(heads|tags)/" threshold = now stableThreshold = never sampleRate = 100 maxMerges = 64
Which would generate pseudo-merge group identifiers like "1234-heads", and "5678-tags" (for branches in fork "1234", and tags in remote "5678", respectively).
SEE ALSO
GIT
Part of the git(1) suite
11/25/2024 | Git 2.47.1 |