NAME

libgetdns -- an implementation of a modern asynchronous DNS API by and for application developers

LIBRARY

DNS Resolver library (libgetdns, -lgetdns)

SYNOPSIS

libgetdns

This man page describes the getdns library, the general concepts behind the API and some of the common elements of the public interface to the library. Each of the public entry points and more complex data types are captured in separate man pages.

DESCRIPTION

getdns is modern asynchronous DNS API intended to be useful to application developers and operating system distributors as a way of making all types of DNS information easily available in many types of programs. The major features of this new API are:

Each of the entry points is offered with both asynchronous and synchronous signatures. The asynchronous functions rely on event handling and callback via libevent. Functions are thread safe.

A context structure maintains DNS query and response data and is used to maintain state during calls to the public entry points.

The project page for this implementation is at

http://getdnsapi.net

The specification is maintained at

http://getdnsapi.net/spec

The git repository for this implementation is at

http://github.com/getdnsapi/getdns

DATA STRUCTURES

The API uses a few data structures to pass data into and return data from the public entry points.

list

an ordered list, the members of the list can be any of the four data types.

dict

a name-value pair. The name is a string literal, and the value can be any of the four data types. The order of the name-value pairs in a dict is not important.

int

an integer compatible with uint32_t.

bindata

a struct used to hold binary data defined as { size_t size; uint8_t *binary_stuff; }.

ASYNCHRONOUS USE

The getdns specification emphasizes the asynchronous nature of the API and allows implementations to define their own approach. This page documents this implementation's decisions and facilities provided to the developer.

This implementation provides asynchronous support via the following mechanisms:

All functions and types discussed in this page are declared in getdns_extra.h

SYNCHRONOUS USE

There are four synchronous functions parallel to the four getdns async functions, except that there is no callback parameter. When an application calls one of these synchronous functions, the API gathers all the required information and then returns the result. The value returned is exactly the same as the response returned in the callback if you had used the async version of the function.

When you are done with the data in the response, call getdns_free_sync_request_memory so that the API can free the memory from its internal pool.

EXTENSIONS

Applications may populate an extension dictionary when making a call to the public entry points. To use an extension add it to the extension dictionary prior to making the call to the public entry point and set the value depending on the behavior you expect. These extensions include:

"dnssec_return_status" (int)

Set to GETDNS_EXTENSION_TRUE to include the DNSSEC status for each DNS record in the replies_tree

"dnssec_return_only_secure" (int)

Set to GETDNS_EXTENSION_TRUE to cause only records that the API can validate as secure with DNSSEC to be returned in the replies_tree and replies_full lists

"dnssec_return_validation_chain" (int)

Set to GETDNS_EXTENSION_TRUE to cause the set of additional DNSSEC-related records needed for validation to be returned in the response object as the list named additional_dnssec at the top level of the response object

"return_both_v4_and_v6" (int)

Set to GETDNS_EXTENSION_TRUE to cause the results of both A and AAAA records for the queried name to be included in the response object.

"add_opt_parameters" (dict)

TBD (complicated)

"add_warning_for_bad_dns"

Set to GETDNS_EXTENSION_TRUE to cause each reply in the replies_tree to contain an additional name whose data type is a list, bad_dns which contains zero or more ints that indicate the types of bad DNS found in the reply.

"specify_class" (int)

Set to the DNS class number (other than Internet (IN) class desired in query.

"return_call_reporting" (int)

Set to GETDNS_EXTENSION_TRUE to add the name call_reporting (list) to the top level of the response object that includes a dict for each call made to the API. TBD: more detail

This implementation of the getdns API is licensed under the BSD license.

DNSSEC

If an application wants the API to do DNSSEC validation for a request, it must set one or more DNSSEC-related extensions. Note that the default is for none of these extensions to be set and the API will not perform DNSSEC. Note that getting DNSSEC results can take longer in a few circumstances.

To return the DNSSEC status for each DNS record in the replies_tree list, use the dnssec_return_status extension. The extension's value (an int) is set to GETDNS_EXTENSION_TRUE to cause the returned status to have the name dnssec_status (an int) added to the other names in the record's dict ("header", "question", and so on). The values for that name are GETDNS_DNSSEC_SECURE, GETDNS_DNSSEC_BOGUS, GETDNS_DNSSEC_INDETERMINATE, and GETDNS_DNSSEC_INSECURE. Thus, a reply might look like:

{     # This is the first reply
      "dnssec_status": GETDNS_DNSSEC_INDETERMINATE,
      "header": { "id": 23456, "qr": 1, "opcode": 0, ... },
      . . .

If instead of returning the status, you want to only see secure results, use the dnssec_return_only_secure extension. The extension's value (an int) is set to GETDNS_EXTENSION_TRUE to cause only records that the API can validate as secure with DNSSEC to be returned in the replies_tree and replies_full lists. No additional names are added to the dict of the record; the change is that some records might not appear in the results. When this context option is set, if the API receives DNS replies but none are determined to be secure, the error code at the top level of the response object is GETDNS_RESPSTATUS_NO_SECURE_ANSWERS.

Applications that want to do their own validation will want to have the DNSSEC-related records for a particular response. Use the dnssec_return_validation_chain extension. The extension's value (an int) is set to GETDNS_EXTENSION_TRUE to cause a set of additional DNSSEC-related records needed for validation to be returned in the response object. This set comes as validation_chain (a list) at the top level of the response object. This list includes all resource record dicts for all the resource records (DS, DNSKEY and their RRSIGs) that are needed to perform the validation from the root up. Thus, a reply might look like:

{     # This is the response object
    "validation_chain":
    [ { "name": <bindata for .>,
    "type": GETDNS_RRTYPE_DNSKEY,
    "rdata": { "flags": 256, . . . },
      . . . 
    },
    { "name": <bindata for .>,
      "type": GETDNS_RRTYPE_DNSKEY,
      "rdata": { "flags": 257, . . . },
      . . .
    },
    { "name": <bindata for .>,
      "type": GETDNS_RRTYPE_RRSIG,
      "rdata": { "signers_name": <bindata for .>,
                 "type_covered": GETDNS_RRTYPE_DNSKEY,
                 . . .
               },
    },
    { "name": <bindata for com.>,
      "type": GETDNS_RRTYPE_DS,
      . . .
    },
    { "name": <bindata for com.>,
      "type": GETDNS_RRTYPE_RRSIG
      "rdata": { "signers_name": <bindata for .>,
                 "type_covered": GETDNS_RRTYPE_DS,
                 . . .
               },
      . . .
    },
    { "name": <bindata for com.>,
      "type": GETDNS_RRTYPE_DNSKEY
      "rdata": { "flags": 256, . . . },
      . . .
    },
    { "name": <bindata for com.>,
      "type": GETDNS_RRTYPE_DNSKEY
      "rdata": { "flags": 257, . . . },
      . . .
    },
    { "name": <bindata for com.>,
      "type": GETDNS_RRTYPE_RRSIG
      "rdata": { "signers_name": <bindata for com.>,
                 "type_covered": GETDNS_RRTYPE_DNSKEY,
                 . . .
               },
      . . .
    },
    { "name": <bindata for example.com.>,
      "type": GETDNS_RRTYPE_DS,
      . . .
    },
    { "name": <bindata for example.com.>,
      "type": GETDNS_RRTYPE_RRSIG
      "rdata": { "signers_name": <bindata for com.>,
                 "type_covered": GETDNS_RRTYPE_DS,
                 . . .
               },
      . . .
    },
    { "name": <bindata for example.com.>,
      "type": GETDNS_RRTYPE_DNSKEY
      "rdata": { "flags": 257, ... },
      . . .
    },
    . . .
  ]
  "replies_tree":
  [
  . . .

If a request is using a context in which stub resolution is set, and that request also has any of the dnssec_return_status, dnssec_return_only_secure, or dnssec_return_validation_chain extensions specified, the API will not perform the request and will instead return an error of GETDNS_RETURN_DNSSEC_WITH_STUB_DISALLOWED.

OPT RESOURCE RECORDS

For lookups that need an OPT resource record in the Additional Data section, use the add_opt_parameters extension. The extension's value (a dict) contains the parameters; these are described in more detail in RFC 2671. They are:

maximum_udp_payload_size (an int) between 512 and 65535; if not specified, this defaults to those from the DNS context

extended_rcode (an int) between 0 and 255; if not specified, this defaults to those from the DNS context

version (an int) between 0 and 255; if not specified, this defaults to 0

do_bit (an int) between 0 and 1; if not specified, this defaults to those from the DNS context

options (a list) contains dicts for each option to be specified. Each list time contains two names: option_code (an int) and option_data (a bindata). The API marshalls the entire set of options into a properly-formatted RDATA for the resource record.

It is very important to note that the OPT resource record specified in the add_opt_parameters extension might not be the same the one that the API sends in the query. For example, if the application also includes any of the DNSSEC extensions, the API will make sure that the OPT resource record sets the resource record appropriately, making the needed changes to the settings from the add_opt_parameters extension.

The use of this extension can conflict with the values in the DNS context. For example, the default for an OS might be a maximum payload size of 65535, but the extension might specify 1550. In such a case, the API will honor the values stated in the extension, but will honor the values from the DNS context if values are not given in the extension.

RESPONSE DATA

The callback function contains a pointer to a response object. A response object is always a dict. The response object always contains at least three names: replies_full (a list) and replies_tree (a list), and status (an int). replies_full is a list of DNS replies (each is bindata) as they appear on the wire. replies_tree is a list of DNS replies (each is a dict) with the various part of the reply parsed out. status is a status code for the query.

Because the API might be extended in the future, a response object might also contain names other than replies_full, replies_tree, and status. Similarly, any of the dicts described here might be extended in later versions of the API. Thus, an application using the API must not assume that it knows all possible names in a dict.

The following lists the status codes for response objects. Note that, if the status is that there are no responses for the query, the lists in replies_full and replies_tree will have zero length.

GETDNS_RESPSTATUS_GOOD At least one response was returned

GETDNS_RESPSTATUS_NO_NAME Queries for the name yielded all negative responses

GETDNS_RESPSTATUS_ALL_TIMEOUT All queries for the name timed out

GETDNS_RESPSTATUS_NO_SECURE_ANSWERS The context setting for getting only secure responses was specified, and at least one DNS response was received, but no DNS response was determined to be secure through DNSSEC.

The top level of replies_tree can optionally have the following names: canonical_name (a bindata), intermediate_aliases (a list), answer_ipv4_address (a bindata), answer_ipv6_address (a bindata), and answer_type (an int).

The value of canonical_name is the name that the API used for its lookup. It is in FQDN presentation format. The values in the intermediate_aliases list are domain names from any CNAME or unsynthesized DNAME found when resolving the original query. The list might have zero entries if there were no CNAMEs in the path. These may be useful, for example, for name comparisons when following the rules in RFC 6125. The value of answer_ipv4_address and answer_ipv6_address are the addresses of the server from which the answer was received. The value of answer_type is the type of name service that generated the response. The values are:

If the call was getdns_address or getdns_address_sync, the top level of replies_tree has an additional name, just_address_answers (a list). The value of just_address_answers is a list that contains all of the A and AAAA records from the answer sections of any of the replies, in the order they appear in the replies. Each item in the list is a dict with at least two names: address_type (whose value is a bindata; it is currently either "IPv4" or "IPv6") and address_data (whose value is a bindata). Note that the dnssec_return_only_secure extension affects what will appear in the just_address_answers list. If the DNS returns other address types, those types will appear in this list as well.

The API can make service discovery through SRV records easier. If the call was getdns_service or getdns_service_sync, the top level of replies_tree has an additional name, srv_addresses (a list). The list is ordered by priority and weight based on the weighting algorithm in RFC 2782, lowest priority value first. Each element of the list is dict has at least two names: port and domain_name. If the API was able to determine the address of the target domain name (such as from its cache or from the Additional section of responses), the dict for an element will also contain address_type (whose value is a bindata; it is currently either "IPv4" or "IPv6") and address_data (whose value is a bindata). Note that the dnssec_return_only_secure extension affects what will appear in the srv_addresses list.

STRUCTURE OF DNS REPLIES_TREE

The names in each entry in the the replies_tree list for DNS responses include header (a dict), question (a dict), answer (a list), authority (a list), and additional (a list), corresponding to the sections in the DNS message format. The answer, authority, and additional lists each contain zero or more dicts, with each dict in each list representing a resource record.

The names in the header dict are all the fields from Section 4.1.1. of RFC 1035. They are: id, qr, opcode, aa, tc, rd, ra, z, rcode, qdcount, ancount, nscount, and arcount. All are ints.

The names in the question dict are the three fields from Section 4.1.2. of RFC 1035: qname (a bindata), qtype (an int), and qclass (an int).

Resource records are a bit different than headers and question sections in that the RDATA portion often has its own structure. The other names in the resource record dicts are name (a bindata), type (an int), class (an int), ttl (an int) and rdata (a dict); there is no name equivalent to the RDLENGTH field.

The rdata dict has different names for each response type. There is a complete list of the types defined in the API. For names that end in "-obsolete" or "-unknown", the bindata is the entire RDATA field. For example, the rdata for an A record has a name ipv4_address (a bindata); the rdata for an SRV record has the names priority (an int), weight (an int), port (an int), and target (a bindata).

Each rdata dict also has a rdata_raw field (a bindata). This is useful for types not defined in this version of the API. It also might be of value if a later version of the API allows for additional parsers. Thus, doing a query for types not known by the API still will return a result: an rdata with just a rdata_raw.

It is expected that later extensions to the API will give some DNS types different names. It is also possible that later extensions will change the names for some of the DNS types listed above.

CALLBACK FUNCTIONS

A call to the async getdns functions typically returns before any network or file I/O occurs. After the API marshalls all the needed information, it calls the callback function that was passed by the application. The callback function might be called at any time, even before the calling function has returned. The API guarantees that the callback will be called exactly once unless the calling function returned an error, in which case the callback function is never called.

The getdns calling function calls the callback with the parameters defined as follows:

typedef void (*getdns_callback_t)(

context see getdns_context (3)

callback_type Supplies the reason for the callback.

response A response object with the response data. This is described in the section titled "RESPONSE DATA" elsewhere in this manual page. The response object is part of the API's memory space, and will be freed by the API with the callback returns.

userarg Identical to the userarg passed to the calling function.

transaction_id The transaction identified assigned by the calling function, used to associate a DNS response to a specific DNS request.

To cancel an outstanding callback, use the following function.

This causes the API to call the callback with a callback_type of GETDNS_CALLBACK_CANCEL if the callback for this transaction_id has not already been called. The callback code for cancellation should clean up any memory related to the identified call, such as to deallocate the memory for the userarg. getdns_cancel_callback() may return immediately, even before the callback finishes its work and returns. Calling getdns_cancel_callback() with a transaction_id of a callback that has already been called or an unknown transaction_id returns GETDNS_RETURN_UNKNOWN_TRANSACTION; otherwise, getdns_cancel_callback() returns GETDNS_RETURN_GOOD.

FILES

EXAMPLES

TBD

DIAGNOSTICS

TBD

SEE ALSO

getdns_address(3), getdns_bindata(3), getdns_context(3), getdns_convert(3), getdns_dict(3), getdns_general(3), getdns_hostname(3), getdns_list(3), getdns_root_trust_anchor(3) getdns_service(3) getdns_validate_dnssec(3)

REPORTING PROBLEMS

Bug reports should be sent to the getdns-bugs@getdns.net

AUTHORS

The getdns API was documented by Paul Hoffman. This implementation of the getdns API was written by: