NAME

hciattach - attach serial devices via UART HCI to BlueZ stack

SYNOPSIS

hciattach [OPTIONS] <tty> <type|id> [speed] [flow] [sleep] [bdaddr]

hciattach -1

hciattach(1) is used to attach a serial UART to the Bluetooth stack as HCI transport interface.

-i: Send break
-n: Don't detach from controlling terminal.
-p: Print the PID when detaching.
-t timeout: Specify an initialization timeout. Default is 5 seconds.
-s speed: Specify an initial speed instead of the hardware default.
-l: List all available configurations.
-r: Set the HCI device into raw mode. The kernel and bluetooth daemon will ignore it.
-h, --help: Show help options

show: This specifies the serial device to attach. A leading /dev can be omitted.
Examples: /dev/ttyS1 ttyS2
type|id: The type or id of the Bluetooth device that is to be attached, i.e. vendor or other device specific identifier. Currently supported types are

type	Description
any	Unspecified HCI_UART interface, no vendor specific options
ericsson	Ericsson based modules
digi	Digianswer based cards
xircom	Xircom PCMCIA cards: Credit Card Adapter and Real Port Adapter
csr	CSR Casira serial adapter or BrainBoxes serial dongle (BL642)
bboxes	BrainBoxes PCMCIA card (BL620)
swave	Silicon Wave kits
bcsp	Serial adapters using CSR chips with BCSP serial protocol
ath3k	Atheros AR300x based serial Bluetooth device
intel	Intel Bluetooth device

Supported ID (manufacturer id, product id)

Description

0x0105, 0x080a	Xircom PCMCIA cards: Credit Card Adapter and Real Port Adapter
0x0160, 0x0002	BrainBoxes PCMCIA card (BL620)

speed: The speed specifies the UART speed to use. Baudrates higher than 115200bps require vendor specific initializations that are not implemented for all types of devices. In general the following speeds are supported:
Supported vendor devices are automatically initialised to their respective best settings.

flow: If the flow is appended to the list of options then hardware flow control is forced on the serial link (CRTSCTS). All above mentioned device types have flow set by default. To force no flow control use noflow instead.
sleep|nosleep: Enables hardware specific power management feature. If sleep is appended to the list of options then this feature is enabled. To disable this feature use nosleep instead. All above mentioned device types have nosleep set by default.
Note: This option will only be valid for hardware which support hardware specific power management enable option from host.
bdaddr: The bdaddr specifies the Bluetooth Address to use. Some devices (like the STLC2500) do not store the Bluetooth address in hardware memory. Instead it must be uploaded during the initialization process. If this argument is specified, then the address will be used to initialize the device. Otherwise, a default address will be used.

<linux-bluetooth@vger.kernel.org>

Maxim Krasnyansky <maxk@qualcomm.com>, Nils Faerber <nils@kernelconcepts.de>

Free use of this software is granted under ther terms of the GNU Lesser General Public Licenses (LGPL).