EBOOK-CONVERT(1) calibre EBOOK-CONVERT(1)
NAME
ebook-convert - ebook-convert
ebook-convert input_file output_file [options]
Convert an e-book from one format to another.
input_file is the input and output_file is the output. Both must be
specified as the first two arguments to the command.
The output e-book format is guessed from the file extension of
output_file. output_file can also be of the special format .EXT where
EXT is the output file extension. In this case, the name of the output
file is derived from the name of the input file. Note that the
filenames must not start with a hyphen. Finally, if output_file has no
extension, then it is treated as a folder and an "open e-book" (OEB)
consisting of HTML files is written to that folder. These files are the
files that would normally have been passed to the output plugin.
After specifying the input and output file you can customize the
conversion by specifying various options. The available options depend
on the input and output file types. To get help on them specify the
input and output file and then use the -h option.
For full documentation of the conversion system see E-book conversion
Whenever you pass arguments to ebook-convert that have spaces in them,
enclose the arguments in quotation marks. For example: "/some path/with
spaces"
The options and default values for the options change depending on both
the input and output formats, so you should always check with:
ebook-convert myfile.input_format myfile.output_format -h
Below are the options that are common to all conversion, followed by
the options specific to every input and output format.
o VALG FOR INNDATA
o VALG FOR UTDATA
o UTSEENDE OG FOLELSE
o HEURISTIC PROCESSING
o SOK OG ERSTATT
o STRUCTURE DETECTION
o INNHOLDSFORTEGNELSE
o METADATA
o FEILSOK
--help, -h
show this help message and exit
--input-profile
Spesifiser inndataprofilen. Inndataprofilen gir
konverteringssystemet informasjon om hvordan tolke den
varierende informasjonen i inndatadokumentet. For eksempel
opplosningens avhengighet (for eksempel lengde i piksler).
Valgmulighetene er: cybookg3, cybook_opus, default, hanlinv3,
hanlinv5, illiad, irexdr1000, irexdr800, kindle, msreader,
mobipocket, nook, sony, sony300, sony900
--list-recipes
List builtin recipe names. You can create an e-book from a
builtin recipe like this: ebook-convert "Recipe Name.recipe"
output.epub
--output-profile
Specify the output profile. The output profile tells the
conversion system how to optimize the created document for the
specified device. In some cases, an output profile can be used
to optimize the output for a particular device, but this is
rarely necessary. Choices are:cybookg3, cybook_opus, default,
generic_eink, generic_eink_hd, generic_eink_large, hanlinv3,
hanlinv5, illiad, ipad, ipad3, irexdr1000, irexdr800, jetbook5,
kindle, kindle_dx, kindle_fire, kindle_oasis, kindle_pw,
kindle_pw3, kindle_scribe, kindle_voyage, kobo, tablet,
msreader, mobipocket, nook, nook_color, nook_hd_plus,
pocketbook_inkpad3, pocketbook_lux, pocketbook_hd,
pocketbook_900, pocketbook_pro_912, galaxy, sony, sony300,
sony900, sony-landscape, sonyt3
--version
show program's version number and exit
VALG FOR INNDATA
Valgmuligheter for a kontrollere prosesseringen av inndata mobi filen
--input-encoding
Spesifiser tegnsettkoden til dokumentet. Om valgt, vil dette
valget overskrive enhver koding laget av dokumentet selv. Det er
spesielt nyttig for dokumenter som ikke angir et kodesett eller
som viser feilmeldinger.
VALG FOR UTDATA
Valgmuligheter for a kontrollere prosesseringen av utdata epub
--dont-split-on-page-breaks
Turn off splitting at page breaks. Normally, input files are
automatically split at every page break into two files. This
gives an output e-book that can be parsed faster and with less
resources. However, splitting is slow and if your source file
contains a very large number of page breaks, you should turn off
splitting on page breaks.
--epub-flatten
Dette valget behoves kun dersom du onkser a benytte EPUB med
FBReaderj. Det vil redusere filsystemet i EPUB ved at det setter
alle filer til toppniva.
--epub-inline-toc
Insert an inline Table of Contents that will appear as part of
the main book content.
--epub-max-image-size
The maximum image size (width x height). A value of none means
use the screen size from the output profile. A value of profile
means no maximum size is specified. For example, a value of
100x200 will cause all images to be resized so that their width
is no more than 100 pixels and their height is no more than 200
pixels. Note that this only affects the size of the actual image
files themselves. Any given image may be rendered at a different
size depending on the styling applied to it in the document.
--epub-toc-at-end
Put the inserted inline Table of Contents at the end of the book
instead of the start.
--epub-version
The version of the EPUB file to generate. EPUB 2 is the most
widely compatible, only use EPUB 3 if you know you actually need
it.
--extract-to
Extract the contents of the generated EPUB file to the specified
folder. The contents of the folder are first deleted, so be
careful.
--flow-size
Split all HTML files larger than this size (in KB). This is
necessary as most EPUB readers cannot handle large file sizes.
The default of 260KB is the size required for Adobe Digital
Editions. Set to 0 to disable size based splitting.
--no-default-epub-cover
Normalt, dersom inndatafilen ikke har noe omslag, og du ikke
onsker a spesifisere ett, sa vil et standard omslag bli generert
med tittel, forfatter osv. Dette valget slar av genereringen av
dette omslaget.
--no-svg-cover
Bruk ikke SVG til bokomslaget. Dette valget dersom din EPUB skal
benyttes pa en enhet som ikke stotter SVG, som iPhone eller
JetBook Lite. Uten dette valget vil slike enheter vise omslaget
som en tom side.
--preserve-cover-aspect-ratio
Nar SVG omslag benyttes, vil dette valget gjore at omslaget
skaleres til a benytte hele skjermomradet, men fortsatt beholde
dets aspektomrade (hoyde og bredde). Dette betyr at det kan
oppsta hvite avgrensninger pa sidene, toppen og bunnen av et
bilde, men bildet vil ikke bli forskjovet. Uten dette valget kan
bildet bli noe forskjovet, men ingen avgrensninger vil oppsta.
--pretty-print
Om spesifisert, vil Utdata programtillegget forsoke a lage data
som er sa lesbart som mulig. Det er mulig at dette ikke har
effekt for enkelte av programtilleggene.
--toc-title
Tittel for enhver generert innlagt innholdsfortegnelse.
UTSEENDE OG FOLELSE
Valgmuligheter for a kontrollere utseendeinnstillinger for utdata
--asciiize
Transliterate Unicode characters to an ASCII representation. Use
with care because this will replace Unicode characters with
ASCII. For instance it will replace "Pele" with "Pele". Also,
note that in cases where there are multiple representations of a
character (characters shared by Chinese and Japanese for
instance) the representation based on the current calibre
interface language will be used.
--base-font-size
The base font size in pts. All font sizes in the produced book
will be rescaled based on this size. By choosing a larger size
you can make the fonts in the output bigger and vice versa. By
default, when the value is zero, the base font size is chosen
based on the output profile you chose.
--change-justification
Forandre tekstjustering. en verdi for "venstre" endrer all
justert tekst i kilden til venstrejustert tekst (f.eks.
ujustert). En verdi for "juster" endrer all ujustert tekst til
justert. en verdi for "original" (standard) forandrer ikke
justeringen i kildefilen. Legg merke til at kun noen
utdataformater stotter justeringer.
--disable-font-rescaling
Sla av all omskalering av fontstorrelser.
--embed-all-fonts
Embed every font that is referenced in the input document but
not already embedded. This will search your system for the
fonts, and if found, they will be embedded. Embedding will only
work if the format you are converting to supports embedded
fonts, such as EPUB, AZW3, DOCX or PDF. Please ensure that you
have the proper license for embedding the fonts used in this
document.
--embed-font-family
Embed the specified font family into the book. This specifies
the "base" font used for the book. If the input document
specifies its own fonts, they may override this base font. You
can use the filter style information option to remove fonts from
the input document. Note that font embedding only works with
some output formats, principally EPUB, AZW3 and DOCX.
--expand-css
By default, calibre will use the shorthand form for various CSS
properties such as margin, padding, border, etc. This option
will cause it to use the full expanded form instead. Note that
CSS is always expanded when generating EPUB files with the
output profile set to one of the Nook profiles as the Nook
cannot handle shorthand CSS.
--extra-css
Enten stien til CSS stilsett eller ra CSS. Denne CSSen vil bli
avhengig av stilsettreglene fra kildefilen, slik at den kan bli
brukt til a tilsidesette disse reglene.
--filter-css
A comma separated list of CSS properties that will be removed
from all CSS style rules. This is useful if the presence of some
style information prevents it from being overridden on your
device. For example: font-family,color,margin-left,margin-right
--font-size-mapping
Kartlegging fra CSS fontnavn til fontstorrelser i poeng. Et
eksempel pa innstillinger er 12,12,14,16,18,20,22,24. Dette er
kartleggingen for storrelsene xx-liten til xx-stor, med den
siste storrelsen som store fonter. Font-omskaleringsalgoritmene
benytter disse storrelsene til a omskalere fontene pa en
hensiktsmessig mate. Standard er a benytte kartleggingen basert
pa utdataprofilen du benytter.
--insert-blank-line
Sett inn en blank linje mellom avsnitt. Dette vil ikke fungere
dersom kildefilen ikke benytter avsnitt (
eller
tagger).
--insert-blank-line-size
Set the height of the inserted blank lines (in em). The height
of the lines between paragraphs will be twice the value set
here.
--keep-ligatures
Behold tilknytninger som finnes i inndata-dokumentet. En
tilknytning er en spesiell gjengivelse av et par av bokstaver,
som ff, fi, osv. De fleste lesere har ikke stotte for
tilknytninger i deres standardfonter, sa de vil mest sannsynlig
ikke gjengies korrekt. Som standard vil calibre omgjore en
tilknytning til en korresponderende vanlige bokstaver. Dette
valget vil gjore at de beholdes som tiltenkt.
--line-height
Linjehoyde i poeng. Kontrollerer avstanden mellom pafolgende
linjer med tekst. Dette gjelder kun elementer som ikke definerer
sin egen linjehoyde. I de fleste tilfeller er valget med minimum
linjehoyde det mest anvendelige. Som standard benyttes ikke
manipulasjon av linjehoyde.
--linearize-tables
Noen darlig utformede dokumenter benytter tabeller til a styre
formgivingen av teksten i en side. Nar man konverterer disse
dokumentene, vil disse dokumentene ofte ha tekst som strekker
seg utover bokkantene, samt andre artefakter. Dette valget vil
utvinne innholdet fra tabellene og presentere det pa en lineaer
mate.
--margin-bottom
Set the bottom margin in pts. Default is 5.0. Setting this to
less than zero will cause no margin to be set (the margin
setting in the original document will be preserved). Note: Page
oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-left
Set the left margin in pts. Default is 5.0. Setting this to less
than zero will cause no margin to be set (the margin setting in
the original document will be preserved). Note: Page oriented
formats such as PDF and DOCX have their own margin settings that
take precedence.
--margin-right
Set the right margin in pts. Default is 5.0. Setting this to
less than zero will cause no margin to be set (the margin
setting in the original document will be preserved). Note: Page
oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-top
Set the top margin in pts. Default is 5.0. Setting this to less
than zero will cause no margin to be set (the margin setting in
the original document will be preserved). Note: Page oriented
formats such as PDF and DOCX have their own margin settings that
take precedence.
--minimum-line-height
Den minste linjehoyden som prosenttall av elementets kalkulerte
tegnstorrelse. calibre vil sikre at hvert element har en
linjehoyde med minst denne innstillingen, uansett hva
inndata-dokumentet spesifiserer. Sett null for a sla av.
Standard er 120%. Benytt denne innstillingen i innstillingene
til den direkte linjehoydens spesifikasjon, om du ikke vet hva
du gjor. For eksempel sa kan du fa dobbel linjeavstand ved a
sette innstillingen til 240.
--remove-paragraph-spacing
Fjern avstand mellom avsnitt. Setter ogsa en kommando for
avsnitt pa 1,5. Avstandsfjerning vil ikke fungere dersom
kildefilen ikke benytter avsnitt (
eller
emndeord).
--remove-paragraph-spacing-indent-size
When calibre removes blank lines between paragraphs, it
automatically sets a paragraph indent, to ensure that paragraphs
can be easily distinguished. This option controls the width of
that indent (in em). If you set this value negative, then the
indent specified in the input document is used, that is, calibre
does not change the indentation.
--smarten-punctuation
Convert plain quotes, dashes and ellipsis to their
typographically correct equivalents. For details, see
https://daringfireball.net/projects/smartypants.
--subset-embedded-fonts
Subset all embedded fonts. Every embedded font is reduced to
contain only the glyphs used in this document. This decreases
the size of the font files. Useful if you are embedding a
particularly large font with lots of unused glyphs.
--transform-css-rules
Path to a file containing rules to transform the CSS styles in
this book. The easiest way to create such a file is to use the
wizard for creating rules in the calibre GUI. Access it in the
"Look & feel->Transform styles" section of the conversion
dialog. Once you create the rules, you can use the "Export"
button to save them to a file.
--transform-html-rules
Path to a file containing rules to transform the HTML in this
book. The easiest way to create such a file is to use the wizard
for creating rules in the calibre GUI. Access it in the "Look &
feel->Transform HTML" section of the conversion dialog. Once you
create the rules, you can use the "Export" button to save them
to a file.
--unsmarten-punctuation
Convert fancy quotes, dashes and ellipsis to their plain
equivalents.
HEURISTIC PROCESSING
Modify the document text and structure using common patterns. Disabled
by default. Use --enable-heuristics to enable. Individual actions can
be disabled with the --disable-* options.
--disable-dehyphenate
Analyser ord med bindestrek i dokumentet. Dokumentet selv
benyttes som ordbok for a avgjore om en bindestrek skal beholdes
eller fjernes.
--disable-delete-blank-paragraphs
Fjern tomme avsnitt fra dokumentet nar de finnes mellom
annenhvert avsnitt
--disable-fix-indents
Gjor om innrykk laget fra flere sidebrytinger til CSS-innrykk.
--disable-format-scene-breaks
Left aligned scene break markers are center aligned. Replace
soft scene breaks that use multiple blank lines with horizontal
rules.
--disable-italicize-common-cases
Sok etter vanlige ord og monstre som noterer seg skraskrift og
gjor dem om til skraskrift.
--disable-markup-chapter-headings
Finn uformaterte kapitteloverskrifter og undertekst til
overskrifter. Forandre dem til h2 og h3 nokkelord. Denne
innstillingen vil ikke lage en TOC, men kan benyttes i
sammenheng med strukturdeteksjon for a lage en.
--disable-renumber-headings
Ser etter hendelser av etterfolgende
eller tagger.
Taggene blir omnummerert for a hindre splittelse av
kapitteloverskriftenes senter.
--disable-unwrap-lines
Pakk opp linjer som bruker interpunksjon og andre
formateringsspor.
--enable-heuristics
Sla pa heuristisk oppgavekjoring. Dette valget ma legges inn for
noen heuristiske oppgaver kan kjores.
--html-unwrap-factor
Skala brukt for a bestemme lengden som en linje skal pakkes opp.
Gyldige verdier er et desimal mellom 0 og 1. Standard er 0.4,
like under medianlinjens lengde. Dersom bare noen fa linjer i
dokumentet behoves pakkes opp, bor denne verdien reduseres.
--replace-scene-breaks
Replace scene breaks with the specified text. By default, the
text from the input document is used.
SOK OG ERSTATT
Modifiser dokumentets tekst og struktur ved a benytte egendefinerte
monstre.
--search-replace
Path to a file containing search and replace regular
expressions. The file must contain alternating lines of regular
expression followed by replacement pattern (which can be an
empty line). The regular expression must be in the Python regex
syntax and the file must be UTF-8 encoded.
--sr1-replace
Erstatning for a erstatte tekst funnet med srl-sok.
--sr1-search
Soker etter monster (ordinaere uttrykk) som skal erstattes med
srl-replace.
--sr2-replace
Erstatning for a erstatte tekst funnet med sr2-sok.
--sr2-search
Sok etter monster (regulaere uttrykk) som skal erstattes med
sr2-replace.
--sr3-replace
Erstatning for a erstatte tekst funnet med sr3-sok.
--sr3-search
Sok etter monster (regulaert uttrykk) som skal erstattes med
sr3-erstatning.
STRUCTURE DETECTION
Kontrollerer auto detektering av dokument strukturen.
--chapter
An XPath expression to detect chapter titles. The default is to
consider or tags that contain the words "chapter",
"book", "section", "prologue", "epilogue" or "part" as chapter
titles as well as any tags that have class="chapter". The
expression used must evaluate to a list of elements. To disable
chapter detection, use the expression "/". See the XPath
Tutorial in the calibre User Manual for further help on using
this feature.
--chapter-mark
Spesifiser hvordan a markere detekterte kapitler. Verdien
"pagebreak" vil sette inn sideavslutning for kapitler. Verdien
"rule" vil sette inn en linje for kapitler. Verdien "none" vil
ikke medfore kapittel markering og verdien "both" vil bruke bade
sideavslutning og linjer for a markere kapitler.
--disable-remove-fake-margins
Some documents specify page margins by specifying a left and
right margin on each individual paragraph. calibre will try to
detect and remove these margins. Sometimes, this can cause the
removal of margins that should not have been removed. In this
case you can disable the removal.
--insert-metadata
Insert the book metadata at the start of the book. This is
useful if your e-book reader does not support
displaying/searching metadata directly.
--page-breaks-before
An XPath expression. Page breaks are inserted before the
specified elements. To disable use the expression: /
--prefer-metadata-cover
Bruk omslagsbilde fra kildefilen fremfor spesifisert
omslagsbilde.
--remove-first-image
Remove the first image from the input e-book. Useful if the
input document has a cover image that is not identified as a
cover. In this case, if you set a cover in calibre, the output
document will end up with two cover images if you do not specify
this option.
--start-reading-at
An XPath expression to detect the location in the document at
which to start reading. Some e-book reading programs (most
prominently the Kindle) use this location as the position at
which to open the book. See the XPath tutorial in the calibre
User Manual for further help using this feature.
INNHOLDSFORTEGNELSE
Kontroller automatisk generering av innholdsliste. Som standardvalg,
dersom kildefilen har en innholdsliste, vil denne bli benyttet som
preferanse til den automatiske genererte versjonen.
--duplicate-links-in-toc
When creating a TOC from links in the input document, allow
duplicate entries, i.e. allow more than one entry with the same
text, provided that they point to a different location.
--level1-toc
XPath expression that specifies all tags that should be added to
the Table of Contents at level one. If this is specified, it
takes precedence over other forms of auto-detection. See the
XPath Tutorial in the calibre User Manual for examples.
--level2-toc
XPath expression that specifies all tags that should be added to
the Table of Contents at level two. Each entry is added under
the previous level one entry. See the XPath Tutorial in the
calibre User Manual for examples.
--level3-toc
XPath expression that specifies all tags that should be added to
the Table of Contents at level three. Each entry is added under
the previous level two entry. See the XPath Tutorial in the
calibre User Manual for examples.
--max-toc-links
Hoyeste antall lenker som legges til TOC. Sett 0 for a sla av.
Standard er: 50. Lenker legges kun til TOC dersom faerre enn
terskelantallet for kapitler har blitt oppdaget.
--no-chapters-in-toc
Ikke legg til automatisk oppdagede kapitler til
innholdsregisteret.
--toc-filter
Fjern oppforinger fra innholdsfortegnelsen hvis titler samsvarer
med de spesifiserte vanlige uttrykkene. Samsvarende oppforinger
og alle deres under-uttrykk er fjernet.
--toc-threshold
Om faerre enn dette antallet kapitler blir oppdaget, legges
lenker til innholdsfortegnelsen. Standard: 6
--use-auto-toc
Normalt, om kildefilen allerede har en innholdsliste, benyttes
den som preferanse til den auto-genererte listen. Med dette
valget blir den auto-genererte alltid benyttet.
METADATA
Valgmuligheter for a legge inn metadata i utdatafilen
--author-sort
Streng som skal benyttes nar man sorterer etter forfatter.
--authors
Sett inn forfatter. Om flere forfattere skal benyttes, ma disse
separeres med et-tegnet - &
--book-producer
Legg inn bokprodusent.
--comments
Set the e-book description.
--cover
Legg inn forsidebilde til den spesifiserte filen eller URL
adressen
--isbn Legg inn ISBN for boken.
--language
Velg sprak
--pubdate
Set the publication date (assumed to be in the local timezone,
unless the timezone is explicitly specified)
--publisher
Set the e-book publisher.
--rating
Legg inn bedommelse. Ma vaere et nummer mellom 1 og 5.
--read-metadata-from-opf, --from-opf, -m
Les metadata fra den spesifiserte OPF filen. Metadata lest fra
denne filen vil overskrive alle metadata i kildefilen.
--series
Set the series this e-book belongs to.
--series-index
Legg inn indeksen til boken i denne serien.
--tags Legg inn emneord for boken. Benytt en kommaseparert listing.
--timestamp
Set the book timestamp (no longer used anywhere)
--title
Bestem tittelen.
--title-sort
Tittelversjonen som skal benyttes til sortering.
FEILSOK
Valgmuligheter for hjelp med feilsok av konverteringen
--debug-pipeline, -d
Save the output from different stages of the conversion pipeline
to the specified folder. Useful if you are unsure at which stage
of the conversion process a bug is occurring.
--verbose, -v
Level of verbosity. Specify multiple times for greater
verbosity. Specifying it twice will result in full verbosity,
once medium verbosity and zero times least verbosity.
AUTHOR
Kovid Goyal
COPYRIGHT
Kovid Goyal
7.10.0 mai 03, 2024 EBOOK-CONVERT(1)