EBOOK-CONVERT(1) calibre EBOOK-CONVERT(1)
NAME
ebook-convert - ebook-convert
ebook-convert input_file output_file [options]
Convert an e-book from one format to another.
input_file is the input and output_file is the output. Both must be
specified as the first two arguments to the command.
The output e-book format is guessed from the file extension of
output_file. output_file can also be of the special format .EXT where
EXT is the output file extension. In this case, the name of the output
file is derived from the name of the input file. Note that the
filenames must not start with a hyphen. Finally, if output_file has no
extension, then it is treated as a folder and an "open e-book" (OEB)
consisting of HTML files is written to that folder. These files are the
files that would normally have been passed to the output plugin.
After specifying the input and output file you can customize the
conversion by specifying various options. The available options depend
on the input and output file types. To get help on them specify the
input and output file and then use the -h option.
For full documentation of the conversion system see E-raamatu
teisendamine
Alati kui edastad programmile ebook-convert tuhikuid sisaldavaid
argumente, umbritse argumendid jutumarkidega. Naiteks: "/some path/with
spaces"
The options and default values for the options change depending on both
the input and output formats, so you should always check with:
ebook-convert myfile.input_format myfile.output_format -h
Below are the options that are common to all conversion, followed by
the options specific to every input and output format.
o SISENDVALIKUD
o VALJUNDVALIKUD
o VALIMUS
o HEURISTILINE TOOTLEMINE
o OTSING JA ASENDAMINE
o ULESEHITUSE TUVASTUS
o SISUKORD
o METAANDMED
o SILUMINE
--help, -h
naita seda veateadet ja valju
--input-profile
Tapsusta sisendprofiil. Sisendprofiil annab teisendussusteemile
teavet, kuidas suhtuda sisenddokumendi erinevasse
informatsiooni. Naiteks resolutsioonist soltuv pikkus (pikkus
pikslites). Valikud on: cybookg3, cybook_opus, default,
hanlinv3, hanlinv5, illiad, irexdr1000, irexdr800, kindle,
msreader, mobipocket, nook, sony, sony300, sony900
--list-recipes
Loetle sisseehitatud retseptide nimesid. Sa saad sisseehitatud
retseptist e-raamatut luua sedasi: ebook-convert "Retsepti
Nimi.recipe" valjund.epub
--output-profile
Specify the output profile. The output profile tells the
conversion system how to optimize the created document for the
specified device. In some cases, an output profile can be used
to optimize the output for a particular device, but this is
rarely necessary. Choices are:cybookg3, cybook_opus, default,
hanlinv3, hanlinv5, illiad, ipad, ipad3, irexdr1000, irexdr800,
jetbook5, kindle, kindle_dx, kindle_fire, kindle_oasis,
kindle_pw, kindle_pw3, kindle_scribe, kindle_voyage, kobo,
msreader, mobipocket, nook, nook_color, nook_hd_plus,
pocketbook_inkpad3, pocketbook_lux, pocketbook_hd,
pocketbook_900, pocketbook_pro_912, galaxy, sony, sony300,
sony900, sony-landscape, sonyt3, tablet, generic_eink,
generic_eink_hd, generic_eink_large
--version
naita programmi versiooninumbrit ja valju
SISENDVALIKUD
Suvandid mobi-sisendfaili tootlemise juhtimiseks
--input-encoding
Tapsusta sisenddokumendi kodeering. Kasutab dokumendi kodeeringu
asemel valitud kodeeringut. Kasulik dokumentide puhul, milles ei
ole margitud kodeeringut voi millel on eksitavad kodeeringu
deklaratsioonid.
VALJUNDVALIKUD
Suvandid epub valjundi tootlemise juhtimiseks
--dont-split-on-page-breaks
Turn off splitting at page breaks. Normally, input files are
automatically split at every page break into two files. This
gives an output e-book that can be parsed faster and with less
resources. However, splitting is slow and if your source file
contains a very large number of page breaks, you should turn off
splitting on page breaks.
--epub-flatten
See valik on vajalik ainult juhul, kui kavatsed EPUB-i avada
programmiga FBReaderJ. See tasandab EPUBi-sisese failisusteemi,
pannes koik failid korgeima tasandi kausta.
--epub-inline-toc
Sisesta reasisene sisukord, mis naib osana raamatu peamisest
sisust.
--epub-max-image-size
The maximum image size (width x height). A value of none means
use the screen size from the output profile. A value of profile
means no maximum size is specified. For example, a value of
100x200 will cause all images to be resized so that their width
is no more than 100 pixels and their height is no more than 200
pixels. Note that this only affects the size of the actual image
files themselves. Any given image may be rendered at a different
size depending on the styling applied to it in the document.
--epub-toc-at-end
Pane sisestatav sisukord raamatu loppu, mitte algusesse.
--epub-version
Loodava EPUB-faili versioon. EPUB 2 on koige uhilduvam; kasuta
EPUB 3 ainult siis, kui tead, et see on kindlasti vajalik.
--extract-to
Extract the contents of the generated EPUB file to the specified
folder. The contents of the folder are first deleted, so be
careful.
--flow-size
Tukelda koik HTML-failid, mis on suuremad sellest suurusest
(uhikutes KB). See on vajalik, kuna enamik EPUB-i lugereid ei
suuda kasitleda suuri failisuurusi. Vaikimisi vaartus 260KB on
suurus, mis on vajalik programmi Adobe Digital Editions jaoks.
Pane vaartuseks 0, kui tahad suurusepohise tukeldamise keelata.
--no-default-epub-cover
Tavaliselt, kui sisendfailis pole kaant ja sa ei maaratle seda,
luuakse vaikimisi kaanepilt pealkirja, autorite ja muu
sellisega. See sate keelab selle kaane loomise.
--no-svg-cover
Do not use SVG for the book cover. Use this option if your EPUB
is going to be used on a device that does not support SVG, like
the iPhone or the JetBook Lite. Without this option, such
devices will display the cover as a blank page.
--preserve-cover-aspect-ratio
When using an SVG cover, this option will cause the cover to
scale to cover the available screen area, but still preserve its
aspect ratio (ratio of width to height). That means there may be
white borders at the sides or top and bottom of the image, but
the image will never be distorted. Without this option the image
may be slightly distorted, but there will be no borders.
--pretty-print
Kui tapsustatud, siis valjundi plugin proovib luua valjundit,
mis on inimesele voimalikult loetav. Ei pruugi mone valjundi
plugina puhul nahtavat moju avaldada.
--toc-title
Title for any generated inline table of contents.
VALIMUS
Suvandid valjundi valjanagemise kontrollimiseks
--asciiize
Transliterate Unicode characters to an ASCII representation. Use
with care because this will replace Unicode characters with
ASCII. For instance it will replace "Pele" with "Pele". Also,
note that in cases where there are multiple representations of a
character (characters shared by Chinese and Japanese for
instance) the representation based on the current calibre
interface language will be used.
--base-font-size
The base font size in pts. All font sizes in the produced book
will be rescaled based on this size. By choosing a larger size
you can make the fonts in the output bigger and vice versa. By
default, when the value is zero, the base font size is chosen
based on the output profile you chose.
--change-justification
Change text justification. A value of "left" converts all
justified text in the source to left aligned (i.e. unjustified)
text. A value of "justify" converts all unjustified text to
justified. A value of "original" (the default) does not change
justification in the source file. Note that only some output
formats support justification.
--disable-font-rescaling
Disable all rescaling of font sizes.
--embed-all-fonts
Embed every font that is referenced in the input document but
not already embedded. This will search your system for the
fonts, and if found, they will be embedded. Embedding will only
work if the format you are converting to supports embedded
fonts, such as EPUB, AZW3, DOCX or PDF. Please ensure that you
have the proper license for embedding the fonts used in this
document.
--embed-font-family
Embed the specified font family into the book. This specifies
the "base" font used for the book. If the input document
specifies its own fonts, they may override this base font. You
can use the filter style information option to remove fonts from
the input document. Note that font embedding only works with
some output formats, principally EPUB, AZW3 and DOCX.
--expand-css
By default, calibre will use the shorthand form for various CSS
properties such as margin, padding, border, etc. This option
will cause it to use the full expanded form instead. Note that
CSS is always expanded when generating EPUB files with the
output profile set to one of the Nook profiles as the Nook
cannot handle shorthand CSS.
--extra-css
Either the path to a CSS stylesheet or raw CSS. This CSS will be
appended to the style rules from the source file, so it can be
used to override those rules.
--filter-css
A comma separated list of CSS properties that will be removed
from all CSS style rules. This is useful if the presence of some
style information prevents it from being overridden on your
device. For example: font-family,color,margin-left,margin-right
--font-size-mapping
CSS fondi nimede vastendamine fondi suurusele. Naiteseadistus on
12,12,14,16,18,20,22,24. Need vastendamised on xx-vaike kuni
xx-suur ning viimane on koige suurema fondi suurus. Fontide
skaleerimise algoritm kasutab neid suurusi, et moistlikult fonte
skaleerida. Vaikeseadistuse otsustab valitud valjundiprofiil.
--insert-blank-line
Sisesta loikude vahele tuhi rida. Ei toota, kui lahtefail ei
kasuta loike (sildid
voi
).
--insert-blank-line-size
Set the height of the inserted blank lines (in em). The height
of the lines between paragraphs will be twice the value set
here.
--keep-ligatures
Preserve ligatures present in the input document. A ligature is
a combined character of a pair of characters like ff, fi, fl et
cetera. Most readers do not have support for ligatures in their
default fonts, so they are unlikely to render correctly. By
default, calibre will turn a ligature into the corresponding
pair of normal characters. Note that ligatures here mean only
unicode ligatures not ligatures created via CSS or font styles.
This option will preserve them instead.
--line-height
The line height in pts. Controls spacing between consecutive
lines of text. Only applies to elements that do not define their
own line height. In most cases, the minimum line height option
is more useful. By default no line height manipulation is
performed.
--linearize-tables
Some badly designed documents use tables to control the layout
of text on the page. When converted these documents often have
text that runs off the page and other artifacts. This option
will extract the content from the tables and present it in a
linear fashion.
--margin-bottom
Set the bottom margin in pts. Default is 5.0. Setting this to
less than zero will cause no margin to be set (the margin
setting in the original document will be preserved). Note: Page
oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-left
Set the left margin in pts. Default is 5.0. Setting this to less
than zero will cause no margin to be set (the margin setting in
the original document will be preserved). Note: Page oriented
formats such as PDF and DOCX have their own margin settings that
take precedence.
--margin-right
Set the right margin in pts. Default is 5.0. Setting this to
less than zero will cause no margin to be set (the margin
setting in the original document will be preserved). Note: Page
oriented formats such as PDF and DOCX have their own margin
settings that take precedence.
--margin-top
Set the top margin in pts. Default is 5.0. Setting this to less
than zero will cause no margin to be set (the margin setting in
the original document will be preserved). Note: Page oriented
formats such as PDF and DOCX have their own margin settings that
take precedence.
--minimum-line-height
The minimum line height, as a percentage of the element's
calculated font size. calibre will ensure that every element has
a line height of at least this setting, irrespective of what the
input document specifies. Set to zero to disable. Default is
120%. Use this setting in preference to the direct line height
specification, unless you know what you are doing. For example,
you can achieve "double spaced" text by setting this to 240.
--remove-paragraph-spacing
Remove spacing between paragraphs. Also sets an indent on
paragraphs of 1.5em. Spacing removal will not work if the source
file does not use paragraphs (
or
tags).
--remove-paragraph-spacing-indent-size
When calibre removes blank lines between paragraphs, it
automatically sets a paragraph indent, to ensure that paragraphs
can be easily distinguished. This option controls the width of
that indent (in em). If you set this value negative, then the
indent specified in the input document is used, that is, calibre
does not change the indentation.
--smarten-punctuation
Convert plain quotes, dashes and ellipsis to their
typographically correct equivalents. For details, see
https://daringfireball.net/projects/smartypants.
--subset-embedded-fonts
Subset all embedded fonts. Every embedded font is reduced to
contain only the glyphs used in this document. This decreases
the size of the font files. Useful if you are embedding a
particularly large font with lots of unused glyphs.
--transform-css-rules
Path to a file containing rules to transform the CSS styles in
this book. The easiest way to create such a file is to use the
wizard for creating rules in the calibre GUI. Access it in the
"Look & feel->Transform styles" section of the conversion
dialog. Once you create the rules, you can use the "Export"
button to save them to a file.
--transform-html-rules
Path to a file containing rules to transform the HTML in this
book. The easiest way to create such a file is to use the wizard
for creating rules in the calibre GUI. Access it in the "Look &
feel->Transform HTML" section of the conversion dialog. Once you
create the rules, you can use the "Export" button to save them
to a file.
--unsmarten-punctuation
Teisenda uhked jutumargid, sidekriipsud ja kolmikpunktid nende
harilike vastetega.
HEURISTILINE TOOTLEMINE
Modify the document text and structure using common patterns. Disabled
by default. Use --enable-heuristics to enable. Individual actions can
be disabled with the --disable-* options.
--disable-dehyphenate
Analuusi poolituskriipsudega sonu terves dokumendis. Dokumenti
ennast kasutatakse sonastikuna, maaramaks, kas need kriipsud
tuleks alles jatta voi eemaldada.
--disable-delete-blank-paragraphs
Eemalda dokumendist tuhjad loigud, kui need esinevad iga teise
loigu jarel
--disable-fix-indents
Turn indentation created from multiple non-breaking space
entities into CSS indents.
--disable-format-scene-breaks
Left aligned scene break markers are center aligned. Replace
soft scene breaks that use multiple blank lines with horizontal
rules.
--disable-italicize-common-cases
Look for common words and patterns that denote italics and
italicize them.
--disable-markup-chapter-headings
Detect unformatted chapter headings and sub headings. Change
them to h2 and h3 tags. This setting will not create a TOC, but
can be used in conjunction with structure detection to create
one.
--disable-renumber-headings
Looks for occurrences of sequential
or tags. The tags
are renumbered to prevent splitting in the middle of chapter
headings.
--disable-unwrap-lines
Unwrap lines using punctuation and other formatting clues.
--enable-heuristics
Luba heuristiline tootlemine. See suvand on vaja maarata, et mis
tahes heuristiline tootlemine toimida saaks.
--html-unwrap-factor
Scale used to determine the length at which a line should be
unwrapped. Valid values are a decimal between 0 and 1. The
default is 0.4, just below the median line length. If only a
few lines in the document require unwrapping this value should
be reduced
--replace-scene-breaks
Replace scene breaks with the specified text. By default, the
text from the input document is used.
OTSING JA ASENDAMINE
Muuda dokumendi teksti ja struktuuri, kasutades kasutajamaaratud
mustreid.
--search-replace
Path to a file containing search and replace regular
expressions. The file must contain alternating lines of regular
expression followed by replacement pattern (which can be an
empty line). The regular expression must be in the Python regex
syntax and the file must be UTF-8 encoded.
--sr1-replace
Replacement to replace the text found with sr1-search.
--sr1-search
Search pattern (regular expression) to be replaced with
sr1-replace.
--sr2-replace
Replacement to replace the text found with sr2-search.
--sr2-search
Search pattern (regular expression) to be replaced with
sr2-replace.
--sr3-replace
Replacement to replace the text found with sr3-search.
--sr3-search
Search pattern (regular expression) to be replaced with
sr3-replace.
ULESEHITUSE TUVASTUS
Kontrolli dokumendi ulesehituse automaatset tuvastamist.
--add-alt-text-to-img
When an
tag has no alt attribute, check the associated
image file for metadata that specifies alternate text, and use
it to fill in the alt attribute. The alt attribute is used by
screen readers for assisting the visually challenged.
--chapter
An XPath expression to detect chapter titles. The default is to
consider or tags that contain the words "chapter",
"book", "section", "prologue", "epilogue" or "part" as chapter
titles as well as any tags that have class="chapter". The
expression used must evaluate to a list of elements. To disable
chapter detection, use the expression "/". See the XPath
Tutorial in the calibre User Manual for further help on using
this feature.
--chapter-mark
Specify how to mark detected chapters. A value of "pagebreak"
will insert page breaks before chapters. A value of "rule" will
insert a line before chapters. A value of "none" will disable
chapter marking and a value of "both" will use both page breaks
and lines to mark chapters.
--disable-remove-fake-margins
Some documents specify page margins by specifying a left and
right margin on each individual paragraph. calibre will try to
detect and remove these margins. Sometimes, this can cause the
removal of margins that should not have been removed. In this
case you can disable the removal.
--insert-metadata
Insert the book metadata at the start of the book. This is
useful if your e-book reader does not support
displaying/searching metadata directly.
--page-breaks-before
XPath avaldis. Maaratletud elementide ette sisestatakse
lehepiir. Keelamiseks kasuta avaldist: /
--prefer-metadata-cover
Use the cover detected from the source file in preference to the
specified cover.
--remove-first-image
Remove the first image from the input e-book. Useful if the
input document has a cover image that is not identified as a
cover. In this case, if you set a cover in calibre, the output
document will end up with two cover images if you do not specify
this option.
--start-reading-at
An XPath expression to detect the location in the document at
which to start reading. Some e-book reading programs (most
prominently the Kindle) use this location as the position at
which to open the book. See the XPath tutorial in the calibre
User Manual for further help using this feature.
SISUKORD
Kontrolli sisukorra automaatset loomist. Vaikimisi, kui lahtefailis on
sisukord olemas, siis eelistatakse seda automaatselt loodavale
sisukorrale.
--duplicate-links-in-toc
When creating a TOC from links in the input document, allow
duplicate entries, i.e. allow more than one entry with the same
text, provided that they point to a different location.
--level1-toc
XPath expression that specifies all tags that should be added to
the Table of Contents at level one. If this is specified, it
takes precedence over other forms of auto-detection. See the
XPath Tutorial in the calibre User Manual for examples.
--level2-toc
XPath expression that specifies all tags that should be added to
the Table of Contents at level two. Each entry is added under
the previous level one entry. See the XPath Tutorial in the
calibre User Manual for examples.
--level3-toc
XPath expression that specifies all tags that should be added to
the Table of Contents at level three. Each entry is added under
the previous level two entry. See the XPath Tutorial in the
calibre User Manual for examples.
--max-toc-links
Maximum number of links to insert into the TOC. Set to 0 to
disable. Default is: 50. Links are only added to the TOC if less
than the threshold number of chapters were detected.
--no-chapters-in-toc
Ara lisa sisukorda automaatselt tuvastatud peatukke.
--toc-filter
Eemalda sisukorrast kirjed, mille pealkiri vastab maaratletud
regulaaravaldisele. Eemaldatakse koik vastavad kirjed ja nende
alamkirjed.
--toc-threshold
Kui tuvastatakse sellest arvust vahem peatukke, siis lisatakse
lingid sisukorda. Vaikimisi: 6
--use-auto-toc
Normally, if the source file already has a Table of Contents, it
is used in preference to the auto-generated one. With this
option, the auto-generated one is always used.
METAANDMED
Suvandid metaandmete maaramiseks valjundis
--author-sort
Autori jargi sortimisel kasutatav sone.
--authors
Maara autorid. Mitme autori puhul tuleks need eraldada
ja-margiga &.
--book-producer
Maara raamatu tootja.
--comments
Maara e-raamatu kirjeldus.
--cover
Set the cover to the specified file or URL
--isbn Maara raamatu ISBN.
--language
Maara keel.
--pubdate
Maara avaldamiskuupaev (eeldatakse olevat kohalikus ajavoondis,
kui ajavoondit eraldi ei maarata)
--publisher
Maara e-raamatu kirjastaja.
--rating
Maara hinnang. Peaks olema number vahemikus 1-st 5-ni.
--read-metadata-from-opf, --from-opf, -m
Read metadata from the specified OPF file. Metadata read from
this file will override any metadata in the source file.
--series
Maara, millissesse sarja see e-raamat kuulub.
--series-index
Maara, mitmes raamat see sarjas on.
--tags Maara raamatu sildid. Peaks olema komaga eraldatud loend.
--timestamp
Maara raamatu ajamarge (ei kasutata enam kusagil)
--title
Maara pealkiri.
--title-sort
Sortimisel kasutatav versioon pealkirjast.
SILUMINE
Suvandid teisendamise vigade otsinguga abistamiseks
--debug-pipeline, -d
Save the output from different stages of the conversion pipeline
to the specified folder. Useful if you are unsure at which stage
of the conversion process a bug is occurring.
--verbose, -v
Level of verbosity. Specify multiple times for greater
verbosity. Specifying it twice will result in full verbosity,
once medium verbosity and zero times least verbosity.
AUTHOR
Kovid Goyal
COPYRIGHT
Kovid Goyal
7.25.0 veebruar 07, 2025 EBOOK-CONVERT(1)