DEBUGINFOD(8) System Manager's Manual DEBUGINFOD(8)

debuginfod - debuginfo-related http file-server daemon

debuginfod [OPTION]... [PATH]...

debuginfod serves debuginfo-related artifacts over HTTP. It periodically scans a set of directories for ELF/DWARF files and their associated source code, as well as archive files containing the above, to build an index by their buildid. This index is used when remote clients use the HTTP webapi, to fetch these files by the same buildid.

If a debuginfod cannot service a given buildid artifact request itself, and it is configured with information about upstream debuginfod servers, it queries them for the same information, just as debuginfod-find would. If successful, it locally caches then relays the file content to the original requester.

Indexing the given PATHs proceeds using multiple threads. One thread periodically traverses all the given PATHs logically or physically (see the -L option). Duplicate PATHs are ignored. You may use a file name for a PATH, but source code indexing may be incomplete; prefer using a directory that contains the binaries. The traversal thread enumerates all matching files (see the -I and -X options) into a work queue. A collection of scanner threads (see the -c option) wait at the work queue to analyze files in parallel.

If the -F option is given, each file is scanned as an ELF/DWARF file. Source files are matched with DWARF files based on the AT_comp_dir (compilation directory) attributes inside it. Caution: source files listed in the DWARF may be a path anywhere in the file system, and debuginfod will readily serve their content on demand. (Imagine a doctored DWARF file that lists /etc/passwd as a source file.) If this is a concern, audit your binaries:

% eu-srcfiles -e BINARY

If any of the -R, -U, or -Z options is given, each file is scanned as an archive file that may contain ELF/DWARF/source files. Archive files are recognized by extension. If -R is given, ".rpm" files are scanned; if -U is given, ".deb" and ".ddeb" files are scanned; if -Z is given, the listed extensions are scanned.

Because of complications such as DWZ-compressed debuginfo, it may require two traversal passes to identify all source code. Source files for binaries in archives are only served from archives, so the caution for -F does not apply. If the same source file may be found in multiple different archives, a heuristic chooses the one closest to the archive holding the debuginfo. ("closest" means "longest common archive name prefix"). Note that due to Debian/Ubuntu packaging policies & mechanisms, debuginfod cannot resolve source files for DEB/DDEB at all. Consider using the --disable-source-scan option.

If no PATH is listed, or none of the scanning options is given, then debuginfod will simply serve content that it accumulated into its index in all previous runs, periodically groom the database, and federate to any upstream debuginfod servers. In passive mode, debuginfod will only serve content from a read-only index and federated upstream servers, but will not scan or groom.

Activate ELF/DWARF file scanning. The default is off.
Activate an additional pattern in archive scanning. Files with name extension EXT (include the dot) will be processed. If CMD is given, it is invoked with the file name added to its argument list, and should produce a common archive on its standard output. Otherwise, the file is read as if CMD were "cat". Since debuginfod internally uses libarchive to read archive files, it can accept a wide range of archive formats and compression modes. The default is no additional patterns. This option may be repeated.
Activate RPM patterns in archive scanning. The default is off. Equivalent to -Z .rpm=cat, since libarchive can natively process RPM archives. If your version of libarchive is much older than 2020, be aware that some distributions have switched to an incompatible zstd compression for their payload. You may experiment with -Z .rpm='(rpm2cpio|zstdcat)<' instead of -R.
Activate DEB/DDEB patterns in archive scanning. The default is off. Equivalent to -Z .deb='(bsdtar -O -x -f - data.tar\*)<' and same for .ddeb and .ipk.
Set the path of the sqlite database used to store the index. This file is disposable in the sense that a later rescan will repopulate data. It will contain absolute file path names, so it may not be portable across machines. It may be frequently read/written, so it should be on a fast filesystem. It should not be shared across machines or users, to maximize sqlite locking performance. For quick testing the magic string ":memory:" can be used to use an one-time memory-only database. The default database file is $HOME/.debuginfod.sqlite.
Set the server to passive mode, where it only services webapi requests, including participating in federation. It performs no scanning, no grooming, and so only opens the sqlite database read-only. This way a database can be safely shared between a active scanner/groomer server and multiple passive ones, thereby sharing service load. Archive pattern options must still be given, so debuginfod can recognize file name extensions for unpacking.
Impose a limit on the runtime of metadata webapi queries. These queries, especially broad "glob" wildcards, can take a large amount of time and produce large results. Public-facing servers may need to throttle them. The default limit is 5 seconds. Set 0 to disable this limit.
Execute given sqlite statement after the database is opened and initialized as extra DDL (SQL data definition language). This may be useful to tune performance-related pragmas or indexes. May be repeated. The default is nothing extra.
Set the TCP port number (0 < NUM < 65536) on which debuginfod should listen, to service HTTP requests. Both IPv4 and IPV6 sockets are opened, if possible. The webapi is documented below. The default port number is 8002.
Govern the inclusion and exclusion of file names under the search paths. The regular expressions are interpreted as unanchored POSIX extended REs, thus may include alternation. They are evaluated against the full path of each file, based on its realpath(3) canonicalization. By default, all files are included and none are excluded. A file that matches both include and exclude REGEX is excluded. (The contents of archive files are not subject to inclusion or exclusion filtering: they are all processed.) Only the last of each type of regular expression given is used.
Set the rescan time for the file and archive directories. This is the amount of time the traversal thread will wait after finishing a scan, before doing it again. A rescan for unchanged files is fast (because the index also stores the file mtimes). A time of zero is acceptable, and means that only one initial scan should performed. The default rescan time is 300 seconds. Receiving a SIGUSR1 signal triggers a new scan, independent of the rescan time (including if it was zero), interrupting a groom pass (if any).
Apply the -I and -X during groom cycles, so that most content related to files excluded by the regexes are removed from the index. Not all content can be practically removed, so eventually a "-G" "maximal-groom" operation may be needed.
Set the groom time for the index database. This is the amount of time the grooming thread will wait after finishing a grooming pass before doing it again. A groom operation quickly rescans all previously scanned files, only to see if they are still present and current, so it can deindex obsolete files. See also the DATA MANAGEMENT section. The default groom time is 86400 seconds (1 day). A time of zero is acceptable, and means that only one initial groom should be performed. Receiving a SIGUSR2 signal triggers a new grooming pass, independent of the groom time (including if it was zero), interrupting a rescan pass (if any)..
Run an extraordinary maximal-grooming pass at debuginfod startup. This pass can take considerable time, because it tries to remove any debuginfo-unrelated content from the archive-related parts of the index. It should not be run if any recent archive-related indexing operations were aborted early. It can take considerable space, because it finishes up with an sqlite "vacuum" operation, which repacks the database file by triplicating it temporarily. The default is not to do maximal-grooming. See also the DATA MANAGEMENT section.
Set the concurrency limit for the scanning queue threads, which work together to process archives & files located by the traversal thread. This important for controlling CPU-intensive operations like parsing an ELF file and especially decompressing archives. The default is related to the number of processors on the system and other constraints; the minimum is 1.
Set the size of the pool of threads serving webapi queries. The following table summarizes the interpretaton of this option and its optional NUM parameter.
no option, -C use a fixed thread pool sized automatically
-C=NUM use a fixed thread pool sized NUM, minimum 2

The first mode is a simple and safe configuration related to the number of processors and other constraints. The second mode is suitable for tuned load-limiting configurations facing unruly traffic.

Traverse symbolic links encountered during traversal of the PATHs, including across devices - as in find -L. The default is to traverse the physical directory structure only, stay on the same device, and ignore symlinks - as in find -P -xdev. Caution: a loops in the symbolic directory tree might lead to infinite traversal.
Configure limits on a cache that keeps recently extracted files from archives. Up to a total of MB megabytes will be kept extracted, in order to avoid having to decompress their archives over and over again. The default MB values depend on the concurrency of the system, and on the available disk space on the $TMPDIR or /tmp filesystem. (This is because that is where the most recently used extracted files are kept.) While previous versions used plain LRU, the cache now attempts to preserve more frequently & recently accessed files, and especially those that took a long time to extract (e.g., vdso.debug!), and penalizes large / old files.
Up to NUM other files from an archive may be prefetched into the cache before they are even requested. If unspecified, these values depend on concurrency of the system and on the available disk space on the $TMPDIR. Allocating more will improve performance in environments where multiple different parts of several large archives are being accessed.
Configure a disk space threshold for emergency flushing of the caches. The filesystem holding the caches is checked periodically. If the available space falls below the given percentage, the caches are flushed, and the fdcaches will stay disabled until the next groom cycle. This mechanism, along a few associated /metrics on the webapi, are intended to give an operator notice about storage scarcity - which can translate to RAM scarcity if the disk happens to be on a RAM virtual disk. The default threshold is 25%.
Configure limits of X-Forwarded-For hops. if X-Forwarded-For exceeds N hops, it will not delegate a local lookup miss to upstream debuginfods. The default limit is 8.
Disable scan of the dwarf source info of debuginfo sections. If a setup has no access to source code, the source info is not required.
Run a synchronized SQLITE WAL checkpoint operation after every NUM completed archive or file scans. This may slow down parallel scanning phase somewhat, but generate much smaller "-wal" temporary files on busy servers. The default is 256. Disabled if 0.
Enable an additional step of RPM path mapping when extracting signatures for use in RPM per-file IMA verification on koji repositories. The signatures are retrieved from the Fedora koji sigcache rpm.sig files as opposed to the original RPM header. If a signature cannot be found in the sigcache rpm.sig file, the RPM will be tried as a fallback.
Increase verbosity of logging to the standard error file descriptor. May be repeated to increase details. The default verbosity is 0.

debuginfod's webapi resembles ordinary file service, where a GET request with a path containing a known buildid results in a file. Unknown buildid / request combinations result in HTTP error codes. This file service resemblance is intentional, so that an installation can take advantage of standard HTTP management infrastructure.

Upon finding a file in an archive or simply in the database, some custom http headers are added to the response. For files in the database X-DEBUGINFOD-FILE and X-DEBUGINFOD-SIZE are added. X-DEBUGINFOD-FILE is simply the unescaped filename and X-DEBUGINFOD-SIZE is the size of the file. For files found in archives, in addition to X-DEBUGINFOD-FILE and X-DEBUGINFOD-SIZE, X-DEBUGINFOD-ARCHIVE is added. X-DEBUGINFOD-ARCHIVE is the name of the archive the file was found in. X-DEBUGINFOD-IMA-SIGNATURE contains the per-file IMA signature as a hexadecimal blob.

% debuginfod-find -v debuginfo /bin/ls |& grep -i x-debuginfo
x-debuginfod-size: 502024
x-debuginfod-archive: /mnt/fedora_koji_prod/koji/packages/coreutils/9.3/4.fc39/x86_64/coreutils-debuginfo-9.3-4.fc39.x86_64.rpm
x-debuginfod-file: /usr/lib/debug/usr/bin/ls-9.3-4.fc39.x86_64.debug
The size of the file, in bytes. This may differ from the http Content-Length: field (if present), due to compression in transit.
The full path name of the file related to the given buildid.
The full path name of the archive that contained the above file, if any.

There are a handful of buildid-related requests. In each case, the buildid is encoded as a lowercase hexadecimal string. For example, for a program /bin/ls, look at the ELF note GNU_BUILD_ID:

% readelf -n /bin/ls | grep -A4 build.id
Note section [ 4] '.note.gnu.buildid' of 36 bytes at offset 0x340:
Owner          Data size  Type
GNU                   20  GNU_BUILD_ID
Build ID: 8713b9c3fb8a720137a4a08b325905c7aaf8429d

Then the hexadecimal BUILDID is simply:

8713b9c3fb8a720137a4a08b325905c7aaf8429d

If the given buildid is known to the server, this request will result in a binary object that contains the customary .*debug_* sections. This may be a split debuginfo file as created by strip, or it may be an original unstripped executable.

If the given buildid is known to the server, this request will result in a binary object that contains the normal executable segments. This may be a executable stripped by strip, or it may be an original unstripped executable. ET_DYN shared libraries are considered to be a type of executable.

If the given buildid is known to the server, this request will result in a binary object that contains the source file mentioned. The path should be absolute. Relative path names commonly appear in the DWARF file's source directory, but these paths are relative to individual compilation unit AT_comp_dir paths, and yet an executable is made up of multiple CUs. Therefore, to disambiguate, debuginfod expects source queries to prefix relative path names with the CU compilation-directory, followed by a mandatory "/".

Note: the caller may or may not elide ../ or /./ or extraneous /// sorts of path components in the directory names. debuginfod accepts both forms. Specifically, debuginfod canonicalizes path names according to RFC3986 section 5.2.4 (Remove Dot Segments), plus reducing any // to / in the path.

For example:

#include <stdio.h> /buildid/BUILDID/source/usr/include/stdio.h
/path/to/foo.c /buildid/BUILDID/source/path/to/foo.c
AT_comp_dir=/zoo/ /buildid/BUILDID/source/zoo//../bar/foo.c

Note: the client should %-escape characters in /SOURCE/FILE that are not shown as "unreserved" in section 2.3 of RFC3986. Some characters that will be escaped include "+", "\", "$", "!", the 'space' character, and ";". RFC3986 includes a more comprehensive list of these characters.

If the given buildid is known to the server, the server will attempt to extract the contents of an ELF/DWARF section named SECTION from the debuginfo file matching BUILDID. If the debuginfo file can't be found or the section has type SHT_NOBITS, then the server will attempt to extract the section from the executable matching BUILDID. If the section is successfully extracted then this request results in a binary object of the section's contents. Note that this result is the raw binary contents of the section, not an ELF file.

This endpoint returns a Prometheus formatted text/plain dump of a variety of statistics about the operation of the debuginfod server. The exact set of metrics and their meanings may change in future versions.

This endpoint triggers a search of the files in the index plus any upstream federated servers, based on given key and value. If successful, the result is a application/json textual array, listing metadata for the matched files. See debuginfod-find(1) for documentation of the common key/value search parameters, and the resulting data schema.

debuginfod stores its index in an sqlite database in a densely packed set of interlinked tables. While the representation is as efficient as we have been able to make it, it still takes a considerable amount of data to record all debuginfo-related data of potentially a great many files. This section offers some advice about the implications.

As a general explanation for size, consider that debuginfod indexes ELF/DWARF files, it stores their names and referenced source file names, and buildids will be stored. When indexing archives, it stores every file name of or in an archive, every buildid, plus every source file name referenced from a DWARF file. (Indexing archives takes more space because the source files often reside in separate subpackages that may not be indexed at the same pass, so extra metadata has to be kept.)

Getting down to numbers, in the case of Fedora RPMs (essentially, gzip-compressed cpio files), the sqlite index database tends to be from 0.5% to 3% of their size. It's larger for binaries that are assembled out of a great many source files, or packages that carry much debuginfo-unrelated content. It may be even larger during the indexing phase due to temporary sqlite write-ahead-logging files; these are checkpointed (cleaned out and removed) at shutdown. It may be helpful to apply tight -I or -X regular-expression constraints to exclude files from scanning that you know have no debuginfo-relevant content.

As debuginfod runs in normal active mode, it periodically rescans its target directories, and any new content found is added to the database. Old content, such as data for files that have disappeared or that have been replaced with newer versions is removed at a periodic grooming pass. This means that the sqlite files grow fast during initial indexing, slowly during index rescans, and periodically shrink during grooming. There is also an optional one-shot maximal grooming pass is available. It removes information debuginfo-unrelated data from the archive content index such as file names found in archives ("archive sdef" records) that are not referred to as source files from any binaries find in archives ("archive sref" records). This can save considerable disk space. However, it is slow and temporarily requires up to twice the database size as free space. Worse: it may result in missing source-code info if the archive traversals were interrupted, so that not all source file references were known. Use it rarely to polish a complete index.

You should ensure that ample disk space remains available. (The flood of error messages on -ENOSPC is ugly and nagging. But, like for most other errors, debuginfod will resume when resources permit.) If necessary, debuginfod can be stopped, the database file moved or removed, and debuginfod restarted.

sqlite offers several performance-related options in the form of pragmas. Some may be useful to fine-tune the defaults plus the debuginfod extras. The -D option may be useful to tell debuginfod to execute the given bits of SQL after the basic schema creation commands. For example, the "synchronous", "cache_size", "auto_vacuum", "threads", "journal_mode" pragmas may be fun to tweak via -D, if you're searching for peak performance. The "optimize", "wal_checkpoint" pragmas may be useful to run periodically, outside debuginfod. The default settings are performance- rather than reliability-oriented, so a hardware crash might corrupt the database. In these cases, it may be necessary to manually delete the sqlite database and start over.

As debuginfod changes in the future, we may have no choice but to change the database schema in an incompatible manner. If this happens, new versions of debuginfod will issue SQL statements to drop all prior schema & data, and start over. So, disk space will not be wasted for retaining a no-longer-useable dataset.

In summary, if your system can bear a 0.5%-3% index-to-archive-dataset size ratio, and slow growth afterwards, you should not need to worry about disk space. If a system crash corrupts the database, or you want to force debuginfod to reset and start over, simply erase the sqlite file before restarting debuginfod.

In contrast, in passive mode, all scanning and grooming is disabled, and the index database remains read-only. This makes the database more suitable for sharing between servers or sites with simple one-way replication, and data management considerations are generally moot.

debuginfod does not include any particular security features. While it is robust with respect to inputs, some abuse is possible. It forks a new thread for each incoming HTTP request, which could lead to a denial-of-service in terms of RAM, CPU, disk I/O, or network I/O. If this is a problem, users are advised to install debuginfod with a HTTPS reverse-proxy front-end that enforces site policies for firewalling, authentication, integrity, authorization, and load control.

Front-end proxies may elide sensitive path name components in X-DEBUGINFOD-FILE/ARCHIVE response headers. For example, using Apache httpd's mod_headers, you can remove the entire directory name prefix:

Header edit x-debuginfod-archive ".*/" ""

When relaying queries to upstream debuginfods, debuginfod does not include any particular security features. It trusts that the binaries returned by the debuginfods are accurate. Therefore, the list of servers should include only trustworthy ones. If accessed across HTTP rather than HTTPS, the network should be trustworthy. Authentication information through the internal libcurl library is not currently enabled.

$TMPDIR
This environment variable points to a file system to be used for temporary files. The default is /tmp.
$DEBUGINFOD_URLS
This environment variable contains a list of URL prefixes for trusted debuginfod instances. Alternate URL prefixes are separated by space. This environment variable may be set by /etc/profile.d scripts reading /etc/debuginfod/*.urls files.

This environment variable can also contain policy defining tags which dictate the response policy for verifying per-file IMA signatures in RPMs. As the space seperated list is read left to right, upon encountering a tag, subsequent URLs up to the next tag will be handled using that specified policy. All URLs before the first tag will use the default policy, ima:ignore. For example:


DEBUGINFOD_URLS="https://foo.com ima:enforcing https://bar.ca http://localhost:8002/ ima:ignore https://baz.org"

Where foo.com and baz.org use the default ignore policy and bar.ca and localhost use an enforcing policy. The policy tag may be one of the following:

ima:enforcing Every downloaded file requires a valid signature, fully protecting integrity.
ima:ignore Skips verification altogether, providing no protection.

Alerts of validation failure will be directed as specified in $DEBUGINFOD_VERBOSE.

$DEBUGINFOD_CACHE_PATH
This environment variable governs the location of the cache where downloaded files and cache-control files are kept. The default directory is chosen based on other environment variables, see below.
$DEBUGINFOD_PROGRESS
This environment variable governs the default progress function. If set, and if a progressfn is not explicitly set, then the library will configure a default progressfn. This function will append a simple progress message periodically to stderr. The default is no progress function output.
$DEBUGINFOD_VERBOSE
This environment variable governs the default file descriptor for verbose output. If set, and if a verbose fd is not explicitly set, then the verbose output will be produced on STDERR_FILENO.
$DEBUGINFOD_RETRY_LIMIT
This environment variable governs the default limit of retry attempts. If a query failed with errno other than ENOENT, will initiate several attempts within the limit.
$DEBUGINFOD_TIMEOUT
This environment variable governs the download commencing timeout for each debuginfod HTTP connection. A server that fails to provide at least 100K of data within this many seconds is skipped. The default is 90 seconds. (Zero or negative means "no timeout".)
$DEBUGINFOD_MAXTIME
This environment variable dictates how long the client will wait to complete the download a file found on a server in seconds. It is best used to ensure that a file is downloaded quickly or be rejected. The default is 0 (infinite time).
$DEBUGINFOD_MAXSIZE
This environment variable dictates the maximum size of a file to download in bytes. This is best used if the user would like to ensure only small files are downloaded. A value of 0 causes no consideration for size, and the client may attempt to download a file of any size. The default is 0 (infinite size).
$DEBUGINFOD_HEADERS_FILE
This environment variable points to a file that supplies headers to outbound HTTP requests, one per line. The header lines shouldn't end with CRLF, unless that's the system newline convention. Whitespace-only lines are skipped.
$DEBUGINFOD_IMA_CERT_PATH
This environment variable contains a list of absolute directory paths holding X.509 certificates for RPM per-file IMA-verification. Alternate paths are separated by colons.

Before each query, the debuginfod client library checks for a need to clean the cache. If it's time to clean, the library traverses the cache directory and removes downloaded debuginfo-related artifacts and newly empty directories, if they have not been accessed recently.

Control files are located directly under the cache directory. They contain simple decimal numbers to set cache-related configuration parameters. If the files do not exist, the client library creates the files with the default parameter values as content.

After each query, the debuginfod client library deposits newly received files into a directory & file that is named based on the build-id. A failed query is also cached by a special file. The naming convention used for these artifacts is deliberately undocumented.

$XDG_CACHE_HOME/debuginfod_client/
Default cache directory, if $XDG_CACHE_HOME is set.
$HOME/.cache/debuginfod_client/
Default cache directory, if $XDG_CACHE_HOME is not set.
$HOME/.debuginfod_client_cache/
Deprecated cache directory, used only if preexisting.
This control file gives the interval between cache cleaning rounds, in seconds. The default is 86400, one day. 0 means "immediately".
This control file sets how long unaccessed debuginfo-related files are retained, in seconds. The default is 604800, one week. 0 means "immediately".
This control file sets how long to remember a query failure, in seconds. New queries for the same artifacts within this time window are short-circuited (returning an immediate failure instead of sending a new query to servers). This accelerates queries that probably would still fail. The default is 600, 10 minutes. 0 means "forget immediately".
This control file sets how long to remember the results of a metadata query. New queries for the same artifacts within this time window are short-circuited (repeating the same results). This accelerates queries that probably would probably have the same results. The default is 3600, 1 hour. 0 means "do not retain".

$HOME/.debuginfod.sqlite
Default database file.

debuginfod-find(1) sqlite3(1) https://prometheus.io/docs/instrumenting/exporters/