CONNTRACK(8) CONNTRACK(8) NAME conntrack - command line interface for netfilter connection tracking SYNOPSIS conntrack -L [table] [options] [-z] conntrack -G [table] parameters conntrack -D [table] parameters conntrack -I [table] parameters conntrack -A [table] parameters conntrack -U [table] parameters conntrack -E [table] [options] conntrack -F [table] conntrack -C [table] conntrack -S conntrack -R file DESCRIPTION The conntrack utility provides a full-featured userspace interface to the Netfilter connection tracking system that is intended to replace the old /proc/net/ip_conntrack interface. This tool can be used to search, list, inspect and maintain the connection tracking subsystem of the Linux kernel. Using conntrack, you can dump a list of all (or a filtered selection of) currently tracked connections, delete connections from the state table, and even add new ones. In addition, you can also monitor connection tracking events, e.g. show an event message (one line) per newly established connection. TABLES The connection tracking subsystem maintains several internal tables: conntrack: This is the default table. It contains a list of all currently tracked connections through the system. If you don't use connection tracking exemptions (NOTRACK iptables target), this means all connections that go through the system. expect: This is the table of expectations. Connection tracking expectations are the mechanism used to "expect" RELATED connections to existing ones. Expectations are generally used by "connection tracking helpers" (sometimes called application level gateways [ALGs]) for more complex protocols such as FTP, SIP or H.323. dying: This table shows the conntrack entries, that have expired and that have been destroyed by the connection tracking system itself, or via the conntrack utility. unconfirmed: This table shows new entries, that are not yet inserted into the conntrack table. These entries are attached to packets that are traversing the stack, but did not reach the confirmation point at the postrouting hook. The tables "dying" and "unconfirmed" are basically only useful for debugging purposes. Under normal operation, it is hard to see entries in any of them. There are corner cases, where it is valid to see entries in the unconfirmed table, eg. when packets that are enqueued via nfqueue, and the dying table, eg. when conntrackd(8) runs in event reliable mode. OPTIONS The options recognized by conntrack can be divided into several different groups. COMMANDS These options specify the particular operation to perform. Only one of them can be specified at any given time. -L --dump List connection tracking or expectation table -G, --get Search for and show a particular (matching) entry in the given table. -D, --delete Delete an entry from the given table. -I, --create Create a new entry from the given table, it fails if it already exists. -A, --add Add a new entry from the given table. -U, --update Update an entry from the given table. -E, --event Display a real-time event log. -F, --flush Flush the whole given table -C, --count Show the table counter. -S, --stats Show the in-kernel connection tracking system statistics. -R, --load-file Load entries from a given file. To read from stdin, "-" should be specified. PARAMETERS -z, --zero Atomically zero counters after reading them. This option is only valid in combination with the "-L, --dump" command options. -o, --output [extended,xml,save,timestamp,id,ktimestamp,labels] Display output in a certain format. With the extended output option, this tool displays the layer 3 information. With ktimestamp, it displays the in-kernel timestamp available since 2.6.38 (you can enable it via the sysctl(8) key net.netfilter.nf_conntrack_timestamp). The labels output option tells conntrack to show the names of connection tracking labels that might be present. The userspace output option tells if the event has been triggered by a process. -e, --event-mask [ALL|NEW|UPDATES|DESTROY][,...] Set the bitmask of events that are to be generated by the in- kernel ctnetlink event code. Using this parameter, you can reduce the event messages generated by the kernel to the types that you are actually interested in. This option can only be used in conjunction with "-E, --event". -b, --buffer-size value Set the Netlink socket buffer size in bytes. This option is useful if the command line tool reports ENOBUFS errors. If you do not pass this option, the default value available at sysctl(8) key net.core.rmem_default is used. The tool reports this problem if your process is too slow to handle all the event messages or, in other words, if the amount of events is big enough to overrun the socket buffer. Note that using a big buffer reduces the chances to hit ENOBUFS, however, this results in more memory consumption. This option can only be used in conjunction with "-E, --event". FILTER PARAMETERS -s, --src, --orig-src IP_ADDRESS Match only entries whose source address in the original direction equals the one specified as argument. Implies "--mask- src" when CIDR notation is used. -d, --dst, --orig-dst IP_ADDRESS Match only entries whose destination address in the original direction equals the one specified as argument. Implies "--mask- dst" when CIDR notation is used. -r, --reply-src IP_ADDRESS Match only entries whose source address in the reply direction equals the one specified as argument. -q, --reply-dst IP_ADDRESS Match only entries whose destination address in the reply direction equals the one specified as argument. -p, --proto PROTO Specify layer four (TCP, UDP, ...) protocol. -f, --family PROTO Specify layer three (ipv4, ipv6) protocol. This option is only required in conjunction with "-L, --dump". If this option is not passed, the default layer 3 protocol will be IPv4. -t, --timeout TIMEOUT Specify the timeout. -m, --mark MARK[/MASK] Specify the conntrack mark. Optionally, a mask value can be specified. In "--update" mode, this mask specifies the bits that should be zeroed before XORing the MARK value into the ctmark. Otherwise, the mask is logically ANDed with the existing mark before the comparison. In "--create" mode, the mask is ignored. -l, --label LABEL Specify a conntrack label. This option is only available in conjunction with "-L, --dump", "-E, --event", "-U --update" or "-D --delete". Match entries whose labels include those specified as arguments. Use multiple -l options to specify multiple labels that need to be set. --label-add LABEL Specify the conntrack label to add to the selected conntracks. This option is only available in conjunction with "-I, --create", "-A, --add" or "-U, --update". --label-del [LABEL] Specify the conntrack label to delete from the selected conntracks. If no label is given, all labels are deleted. This option is only available in conjunction with "-U, --update". -c, --secmark SECMARK Specify the conntrack selinux security mark. -u, --status [ASSURED|SEEN_REPLY|FIXED_TIMEOUT|EXPECTED|OFFLOAD|UNSET][,...] Specify the conntrack status. -n, --src-nat Filter source NAT connections. -g, --dst-nat Filter destination NAT connections. -j, --any-nat Filter any NAT connections. -w, --zone Filter by conntrack zone. See iptables CT target for more information. --orig-zone Filter by conntrack zone in original direction. See iptables CT target for more information. --reply-zone Filter by conntrack zone in reply direction. See iptables CT target for more information. --tuple-src IP_ADDRESS Specify the tuple source address of an expectation. Implies "--mask-src" when CIDR notation is used. --tuple-dst IP_ADDRESS Specify the tuple destination address of an expectation. Implies "--mask-dst" when CIDR notation is used. --mask-src IP_ADDRESS Specify the source address mask. For conntracks this option is only available in conjunction with "-L, --dump", "-E, --event", "-U --update" or "-D --delete". For expectations this option is only available in conjunction with "-I, --create". --mask-dst IP_ADDRESS Specify the destination address mask. Same limitations as for "--mask-src". PROTOCOL FILTER PARAMETERS TCP-specific fields: --sport, --orig-port-src PORT Source port in original direction --dport, --orig-port-dst PORT Destination port in original direction --reply-port-src PORT Source port in reply direction --reply-port-dst PORT Destination port in reply direction --state state TCP state, one of NONE, SYN_SENT, SYN_RECV, ESTABLISHED, FIN_WAIT, CLOSE_WAIT, LAST_ACK, TIME_WAIT, CLOSE or LISTEN. UDP-specific fields: --sport, --orig-port-src PORT Source port in original direction --dport, --orig-port-dst PORT Destination port in original direction --reply-port-src PORT Source port in reply direction --reply-port-dst PORT Destination port in reply direction ICMP-specific fields: --icmp-type TYPE ICMP Type. Has to be specified numerically. --icmp-code CODE ICMP Code. Has to be specified numerically. --icmp-id ID ICMP Id. Has to be specified numerically (non-mandatory) UDPlite-specific fields: --sport, --orig-port-src PORT Source port in original direction --dport, --orig-port-dst PORT Destination port in original direction --reply-port-src PORT Source port in reply direction --reply-port-dst PORT Destination port in reply direction SCTP-specific fields: --sport, --orig-port-src PORT Source port in original direction --dport, --orig-port-dst PORT Destination port in original direction --reply-port-src PORT Source port in reply direction --reply-port-dst PORT Destination port in reply direction --state state SCTP state, one of NONE, CLOSED, COOKIE_WAIT, COOKIE_ECHOED, ESTABLISHED, SHUTDOWN_SENT, SHUTDOWN_RECD, SHUTDOWN_ACK_SENT. --orig-vtag value Verification tag (32-bits value) in the original direction --reply-vtag value Verification tag (32-bits value) in the reply direction DCCP-specific fields (needs Linux >= 2.6.30): --sport, --orig-port-src PORT Source port in original direction --dport, --orig-port-dst PORT Destination port in original direction --reply-port-src PORT Source port in reply direction --reply-port-dst PORT Destination port in reply direction --state state DCCP state, one of NONE, REQUEST, RESPOND, PARTOPEN, OPEN, CLOSEREQ, CLOSING, TIMEWAIT. --role [client|server] Role that the original conntrack tuple is tracking GRE-specific fields: --srckey, --orig-key-src KEY Source key in original direction (in hexadecimal or decimal) --dstkey, --orig-key-dst KEY Destination key in original direction (in hexadecimal or decimal) --reply-key-src KEY Source key in reply direction (in hexadecimal or decimal) --reply-key-dst KEY Destination key in reply direction (in hexadecimal or decimal) DIAGNOSTICS The exit code is 0 for correct function. Errors which appear to be caused by invalid command line parameters cause an exit code of 2. Any other errors cause an exit code of 1. EXAMPLES conntrack -L Show the connection tracking table in /proc/net/ip_conntrack format conntrack -L -o extended Show the connection tracking table in /proc/net/nf_conntrack format, with additional information. conntrack -L -o xml Show the connection tracking table in XML conntrack -L -o save Show the connection tracking table in conntrack syntax format conntrack -L -f ipv6 -o extended Only dump IPv6 connections in /proc/net/nf_conntrack format, with additional information. conntrack -L --src-nat Show source NAT connections conntrack -E -o timestamp Show connection events together with the timestamp conntrack -D -s 1.2.3.4 Delete all flows whose source address is 1.2.3.4 conntrack -U -s 1.2.3.4 -m 1 Set connmark to 1 of all the flows whose source address is 1.2.3.4 conntrack -L -w 11 -o save | sed s/-w 11/-w 12/g | conntrack --load-file - Copy all entries from ct zone 11 to ct zone 12 BUGS Please, report them to netfilter-devel@vger.kernel.org or file a bug in Netfilter's bugzilla (https://bugzilla.netfilter.org). SEE ALSO nftables(8),iptables(8),conntrackd(8) See http://conntrack-tools.netfilter.org AUTHORS Jay Schulist, Patrick McHardy, Harald Welte and Pablo Neira Ayuso wrote the kernel-level "ctnetlink" interface that is used by the conntrack tool. Pablo Neira Ayuso wrote and maintains the conntrack tool, Harald Welte added support for conntrack-based accounting counters. Man page written by Harald Welte and Pablo Neira Ayuso . August 9, 2019 CONNTRACK(8)