mge-utalk - Driver for MGE UPS SYSTEMS UTalk protocol equipment
mge-utalk -a UPS_NAME [OPTIONS]
This man page only documents the hardware-specific features of the mge-utalk driver. For information about the core driver, see nutupsdrv(8).
mge-utalk supports the following legacy units, using the MGE UTalk protocol:
This driver also support some newer models with backward UTalk compatibility, such as Pulsar Evolution and Pulsar EXtreme C. As these models also support the SHUT protocol, prefer mge-shut for serial communication, or use the USB port, if available, with the usbhid-ups driver.
This driver supports the following optional settings in the ups.conf(5):
The factory default value is 30 (in percent), and can be settable depending on the exact model.
The default value is 20 (in seconds).
The default value is 1 (in minutes).
Repetitive timeout and staleness
Older models, such as ES/ESV ones, might report repetitive "data stale" errors. This is due to the fact that these models don’t support too much polling. To solve this problem, add "pollinterval=20" in ups.conf, and change the value of MAXAGE to 25 in upsd.conf, and DEADTIME to 25 in upsmon.conf.
The core driver
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
|11/01/2022||Network UPS Tools 2.8.0|