CGPS(1)                       GPSD Documentation                       CGPS(1)

NAME
       cgps - curses terminal client for gpsd

SYNOPSIS
       cgps [OPTIONS] [server[:port[:device]]]

       cgps -h

       cgps -V

DESCRIPTION
       cgps is an ncurses based gpsd client. It is able to run on a serial
       terminal or terminal emulator. It resembles xgps(1), but without the
       pictorial satellite display and does not require X or other windowing
       system.

       cgps does not require root privileges. It will also run fine as root.
       Running under sudo will cause loss of functionality.

       None of the error estimates provided by gpsd, and displayed by cgps,
       should be taken as anything other than "goodness" levels.  GNSS
       receiver manufactures often do not document the basis for their
       estimates.  Those that do document their estimates are inconsistent
       about what they mean.

OPTIONS
       -?, -h, --help
           Print a summary of options and then exit.

       -D LVL, --debug LVL
           Sets the debug level; it is primarily for use by GPSD developers.
           It enables various progress messages to standard error.

       -i, --imu
           Show IMU instead of fix and satellite data.

       -l FMT, --llfmt FMT
           Sets the format of latitude and longitude reports. The value 'd'
           produces decimal degrees and is the default. The value 'm' produces
           degrees and decimal minutes. The value 's' produces degrees,
           minutes, and decimal seconds.

       -m, --magtrack
           Display tracks as magnetic, not true.

       -m, --magtrack
           Display your magnetic track (as opposed to your true track). This
           is a calculated value, not a measured value. Magnetic variation is
           always potentially subject to large errors, but is usually better
           than two degrees.

       -s, --silent
           Prevents cgps from displaying the raw data coming from the daemon.
           This display can also be toggled with the s command.

       -u UNITS, --units UNITS
           Set the system units for display; follow the keyword with 'i' for
           'imperial' for American units (International Feet in altitude and
           error estimates, miles per hour in speeds), 'n' for 'nautical'
           (feet in altitude and error estimates, knots in speed) or 'm' for
           'metric' (meters in altitude and error estimates, kilometers per
           hour in speeds).

           Note: The USA Survey Foot is not supported.

       -V, --version
           Print the package version and exit.

ARGUMENTS
       By default, clients collect data from the local gpsd daemon running on
       localhost, using the default GPSD port 2947. The optional argument to
       any client may override this behavior: [server[:port[:device]]]

       For further explanation, and examples, see the ARGUMENTS section in the
       gps(1) man page

COMMANDS
       cgps terminates when you send it a SIGHUP or SIGINT; given default
       terminal settings this will happen when you type Ctrl-C at it.

       cgps will accept a few single letter commands while running:

       c
           Clear the bottom window.

       d
           Show lat/lon dd.dddddddd, dd mm.mmmmmm and dd mm ss.ssss

       h
           Popup a help window.

       i
           Use imperial units.

       m
           Use metric units.

       n
           Use nautical units.

       q
           Clear screen and exit

       s
           Toggle showing raw JSON data in the bottom window.

       t
           Toggle true/magnetic track.

ENVIRONMENT
       The environment variable GPSD_UNITS is checked if no unit system is
       specified on the command line. It may be set to 'i'. 'imperial', 'm',
       'metric', or 'n', 'nautical'.

       LC_MEASUREMENT and then LANG are checked if no unit system has been
       specified on the command line, or in GPSD_UNITS. If the value is 'C',
       'POSIX', or begins with 'en_US' the unit system is set to imperial. The
       default if no system has been selected defaults to metric.

RETURN VALUES
       0
           on success.

       1
           on failure

SEE ALSO
       gegps(1), gpsctl(1), gps(1), gpsprof*(1), gpsfake(1), gpscat(1),
       gpspipe(1), gpsmon(1), xgps*(1). xgpsspeed(1)

       libgps(3), libgpsmm(3)

       gpsd(8)

RESOURCES
       Project web site:  <https://gpsd.io/>

COPYING
       This file is Copyright 2013 by the GPSD project
       SPDX-License-Identifier: BSD-2-clause

GPSD Version 3.25                 2023-01-10                           CGPS(1)