AL175(8) NUT Manual AL175(8) NAME al175 - Driver for Eltek UPS models with AL175 alarm module SYNOPSIS al175 -h al175 -a UPS_NAME [OPTIONS] Note This man page only documents the hardware-specific features of the al175 driver. For information about the core driver, see nutupsdrv(8). SUPPORTED HARDWARE The al175 driver is known to work with the following UPSes: Eltek MPSU4000 with AL175 alarm module It may also work with other UPSes equipped with AL175 alarm module, but they have not been tested. AL175 have to be configured to operate in COMLI mode. See documentation supplied with your hardware on how to do it. EXTRA ARGUMENTS This driver does not support any extra settings in the ups.conf(5). INSTANT COMMANDS This driver supports some extra commands (see upscmd(8)): test.battery.start Start a battery test. test.battery.stop Stop a battery test. VARIABLES Besides status, this driver reads UPS state into following variables: o ups.test.result o output.voltage.nominal o output.current o battery.voltage.nominal o battery.current o battery.temperature o input.transfer.boost.low KNOWN ISSUES AND BUGS o Shutdown is not supported. FIXME o The driver was reworked to meet the project code quality criteria, without testing on real hardware. Some bugs may have crept in. AUTHOR Kirill Smelkov SEE ALSO The core driver: nutupsdrv(8) Internet resources: The NUT (Network UPS Tools) home page: https://www.networkupstools.org/ Network UPS Tools 2.8.2 05/20/2024 AL175(8)